参数资料
| 型号： | A1210 |
| 厂商： | Crydom Co. |
| 文件页数： | 18/20页 |
| 文件大小： | 0K |
| 描述： | RELAY SSR AC 10A 140VAC PNL MNT |
| 其它有关文件： | Declaration of Conformity |
| 3D 型号： | S1 Series.sat S1 Series.dwg |
| 标准包装： | 20 |
| 系列： | 1 |
| 电路： | SPST-NO（1 Form A） |
| 输出类型： | AC，过零 |
| 负载电流： | 10A |
| 输入电压： | 90 ~ 280VAC |
| 电压 - 负载： | 24 ~ 140 V |
| 安装类型： | 底座安装或面板安装 |
| 端接类型： | 螺丝端子 |
| 封装/外壳： | Hockey Puck |
| 包装： | 散装 |
| 继电器类型： | 继电器 |
| 相关产品： | CC1810-ND - THERMAL PAD SNGL PHASE WADHESVE CC1944-ND - COPPER LUG TERMINAL CC1945-ND - THERMAL PAD SINGLE PHASE CC1708-ND - COPPER LUG TERMINAL HS301DR-ND - HEATSINK SSR 3.0DEG C/W DIN MNT CC1793-ND - HEATSINK SSR 3.5DEG C/W DIN MNT CC1794-ND - HEATSINK SSR 5.0DEG C/W DIN MNT CC1924-ND - COVER PROTECTIVE SSR CLEAR CC1172-ND - FILTER EMI FOR SINGLE PHASE SSR CC1070-ND - PROTECTIVE COVER FOR RELAYS |
| 其它名称： | A1210CC A1210CC-ND CC1885 |
Glossary of Terms
I/O Modules
Industry Standard Packaging
UL Recognized, CSA Certi?ed,
CE Compliant
Crydom offers a broad line of digital I/O modules and mounting
boards. Designed for long, reliable service in demanding industrial
environments, these modules provide optical isolation between
logic-level control systems and external loads, such as motors,
valves, solenoids, resistive heating elements, etc.. Output modules
within the offer can switch loads up to 5 Amps at 24-280 VAC (Form
A, SPST-NO, zero-crossing output), or up to 5A/3A at 100/200 VDC
(Form A SPST-NO). Input modules provide digital feedback to the
control system when the load is energized and are available with
inputs up to 280Vac / 48 VDC, with either a 5 VDC or 24 VDC logic-
level output.
0.6" Modules
AC Inputs for 24 V, 120 V, 240 V
DC Inputs for 3.3 to 32 V, 10 to 48 V
4 kV Optical Isolation
Plugs into 0.6" Mounting boards
M Series
AC Inputs for 24 V, 120 V, 240 V
DC Inputs for 3.3 to 32 V, 10 to 48 V
4 kV Optical Isolation
Plugs into M Series Mounting boards
SM Series
AC Inputs for 24 V, 120 V, 240 V
DC Inputs for 3.3 to 32 V, 10 to 48 V
4 kV Optical Isolation
Plugs into SM Series Mounting boards
C4 Series
Built-in LED Status Indicator
Regulated Supply Voltage
4 kV Optical Isolation
Replaceable 2 AG Type Fuse (output modules)
Mounting boards available
0.6" Modules
M Series
SM Series
C4 Series
Quads
Terminology
Number of Modules
4 6 8 16 24 32
Plugs into C4 Series Mounting boards
Quads
4 Input Circuits per module
AC Inputs for 24 V, 120 V, and 240 V
DC Inputs for 4 to 32 V, 10 to 60 V
4kV Optical Isolation
Plugs into mounting boards for quad-pack modules
Control Voltage Range - the range of voltage when applied across the SSR Input terminals,
will maintain an ON condition across the Output terminals.
Control Current - Current drain on the control source at specified SSR input voltages and
On/Off conditions.
dv/dt - Maximum rate of rise of voltage applied across the output terminals that the SSR can
withstand without turning ON.A characteristic of thyristors used in AC SSRs.
On-State Voltage (Maximum) - The peak voltage that appears across the SSR output
terminals at full rated load current.
Phase Control - Turn-On of a non-zero switching SSR (each half cycle), at a phase angle
determined by the control signal source.
Photocoupler/Isolator - A combination of light-emitting diode and light-sensitive
semiconductor used to transmit information optically while providing electrical isolation.
Commonly used isolating element for coupling the control signal to the output in an SSR.
dv/dt Off State (Static) - Specified as a minimum dv/dt withstand capability of SSRs in the
off or blocking state.
Power Dissipation - The maximum average power dissipation (Watts) resulting from the
effective voltage drop (power loss) in the SSR output semiconductor.
Form, Contact - Contact or output configuration, as in Form A for Single Pole, Single Throw,
Normally Open (SPST-NO)
Rectifier - Asemiconductor used to convert AC power to DC.It allows current to flow in one
direction (forward) and prevents the flow of current in the opposite directions (reverse).
Holding Current - The minimum load current required to maintain a thyristor in its
conducting state.
SCR - Silicon Controlled Rectifier. Unidirectional semiconductor of the thyristor family with
latching properties.
Input Current (Maximum) - Current drain on the control source at specified SSR input
voltages and On/Off conditions.
Snubber - A resistor-capacitor combination placed across the SSR output terminals to
reduce dv/dt and transients in thyristor circuits.
Isolation Voltage - The value of dielectric strength measured between the input and output,
input to base, or output to base.
Solid State Relay (SSR) - Isolated On-Off switch composed of non-moving electrical parts
(primarily semiconductors, transformers and passive components).
LED - Light Emitting Diode, commonly used for status indication on some models of SSRs
and as the light source in a photocoupler .
Surge Current - The maximum allowable SSR momentary current flow for a specific time
duration.Typically specified as a peak value for one line cycle for AC.
Line Voltage Range - The range of voltages applied to the output, over which the SSR will
continuously block or switch and otherwise perform as specified.
Load Current Range - The range of current applied to the output, over which the SSR will
Thermal Resistance - Expressed in degrees Celsius per watt (?C/W).This value defines the
temperature gradient in the path between the power generated in the output SSR
semiconductor and the final dissipating medium (heat sink/air).
continuously block or switch and otherwise perform as specified.
Thyristor - A semiconductor bistable device comprising three or more junctions (PNPN,
MOSFET - Metal Oxide Semiconductor Field-Effect Transistor.The control electrode (gate) is
generally isolated from the source electrode by a layer of silicon oxide. A voltage applied
between the gate and the source will provide a current flow between the drain and the source.
etc).The generic name for a family of gate controlled switches including SCRs and triacs.
Triac - Bidirectional semiconductor of the thyristor family. Performance is similar to that of
an inverse pair of SCRs, triggered by a single gate electrode.
Normally Open (NO) - A contact or SSR output that is open when no control power is
present at the input (coil).This is a Form A device.
Normally Closed (NC) - A contact or SSR output that is closed when no control power is
present at the input (coil).This is a Form B device.
Off-State Voltage - The maximum transient voltage that an SSR output can withstand
without malfunction or damage.
Trigger - To turn on an SCR or triac.
Turn-Off Voltage (Must Release) - The voltage applied to the SSR input at or below which
the output must be in the Off-State (Normally-Open).
Turn-On Voltage (Must Operate) - The voltage applied to the SSR input at or above which
the output must be in the on state (Normally-Open).
18
Questions? Call or e-mail
Americas +1 (877) 502 5500 sales@crydom.com
Europe +44 (0) 1202 606030 sales-europe@crydom.com
相关PDF资料 |
PDF描述 |
|---|---|
| 06383 | ATTACH TAPE ACRYLIC 7/8"X20YD |
| 0395005110 | 3.5MM EURO PLUG RA GRN 10POS |
| 0395005010 | 3.5MM EURO PLUG RA GRN 10POS |
| 5-641311-0 | 20 CIR MTA-100 ASSY TAPE LF |
| L50J20K | RESISTOR POWER 20000 OHM 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A-1210 | 制造商:NGC 功能描述: 制造商:NORTHROP GRUMMAN SYSTEMS 功能描述: |
| A1210-10 | 功能描述:固态继电器-工业安装 PM IP00 SSR 240VAC 10A,90-280VAC,RN RoHS:否 制造商:Crydom 控制电压范围:4 VDC to 32 VDC 负载电压额定值:7 VDC to 72 VDC 负载电流额定值:160 A 触点形式: 输出设备:SSR 安装风格:Panel |
| A12101020601 | 制造商:Acme Electric Corporation XXX 功能描述:660 , Replacement Capacitors |
| A12104DL | 制造商:Pentair Technical Products / Hoffman 功能描述:DL Box 12.00x10.00x4.00 Gray, 12.00x10.00x4.00, Steel |
| A-12104DL | 制造商:Pentair Technical Products / Hoffman 功能描述:DL Box 12.00x10.00x4.00 |
发布紧急采购，3分钟左右您将得到回复。