A1321/A1322/A1323
A1321-DS Rev. 3
Worcester, Massachusetts 01615-0036 (508) 853-5000
115 Northeast Cutoff, Box 15036
www.allegromicro.com
Allegro MicroSystems, Inc.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC .......................................... 8 V*
Reverse-Battery Voltage, VRCC.......................–0.1 V
Reverse-Output Voltage, VROUT .....................–0.1 V
Output Sink Current, IOUT ............................. 10 mA
Operating Temperature
Ambient, TA, Range E..................–40C to 85C
Ambient, TA, Range L................–40C to 150C
Maximum Junction, TJ(max)........................165C
Storage Temperature, TS ..................–65C to 170C
*Additional current draw may be observed at voltages
above the minimum supply Zener clamp voltage, VZ(min),
due to the Zener diode turning on.
Temperature-stable quiescent output
voltage
Precise recoverability after temperature cycling
Output voltage proportional to magnetic ux
density
Ratiometric rail-to-rail output
The A132X family of linear Hall-effect sensors are optimized, sensitive, and tem-
perature-stable. These ratiometric Hall-effect sensors provide a voltage output that
is proportional to the applied magnetic eld. The A132X family has a quiescent
output voltage that is 50% of the supply voltage and output sensitivity options
of 2.5mV/G, 3.125mV/G, and 5mV/G. The features of this family of devices are
ideal for use in the harsh environments found in automotive and industrial linear
and rotary position sensing systems.
Each device has a BiCMOS monolithic circuit which integrates a Hall element,
improved temperature-compensating circuitry to reduce the intrinsic sensitivity
drift of the Hall element, a small-signal high-gain amplier, and a rail-to-rail low-
impedance output stage.
A proprietary dynamic offset cancellation technique, with an internal high-fre-
quency clock, reduces the residual offset voltage normally caused by device
overmolding, temperature dependencies, and thermal stress. The high frequency
clock allows for a greater sampling rate, which results in higher accuracy and
faster signal processing capability. This technique produces devices that have an
extremely stable quiescent output voltage, are immune to mechanical stress, and
have precise recoverability after temperature cycling. Having the Hall element
and an amplier on a single chip minimizes many problems normally associated
with low-level analog signals.
Output precision is obtained by internal gain and offset trim adjustments made at
end-of-line during the manufacturing process.
The A132X family is provided in a 3-pin single in-line package (UA) and a 3-pin
surface mount package (LH).
Ratiometric Linear Hall Effect Sensor for High-Temperature Operation
Use the following complete part numbers when ordering:
Package UA, 3-pin SIP
Features and Benets
Improved sensitivity
4.5 to 5.5 V operation
Immunity to mechanical stress
Solid-state reliability
Robust EMC protection
Package LH, 3-pin Surface Mount
1
2
3
1
2
3
Part Number
Package
Ambient
Sensitivity, Typ.
A1321EUA
SIP
–40C to 85C
5.000 mV/G
A1321ELH
Surface Mount
A1321LUA
SIP
–40C to 150C
A1321LLH
Surface Mount
A1322EUA
SIP
–40C to 85C
3.125 mV/G
A1322ELH
Surface Mount
A1322LUA
SIP
–40C to 150C
A1322LLH
Surface Mount
A1323EUA
SIP
–40C to 85C
2.500 mV/G
A1323ELH
Surface Mount
A1323LUA
SIP
–40C to 150C
A1323LLH
Surface Mount
1. VCC
2. GND
3. VOUT
1. VCC
2. VOUT
3. GND