- 您现在的位置：买卖IC网 > PDF目录67355 > A1383EUA-T MAGNETIC FIELD SENSOR-HALL EFFECT, 4.35-4.65V, RECTANGULAR, THROUGH HOLE MOUNT PDF资料下载
参数资料
| 型号： | A1383EUA-T |
| 元件分类： | 磁阻传感器 |
| 英文描述： | MAGNETIC FIELD SENSOR-HALL EFFECT, 4.35-4.65V, RECTANGULAR, THROUGH HOLE MOUNT |
| 封装： | SIP-3 |
| 文件页数： | 17/19页 |
| 文件大小： | 391K |
| 代理商： | A1383EUA-T |
Programmable Linear Hall Effect Sensor ICs with Analog Output
Available in a Miniature Thin Profile Surface Mount Package
A1381, A1382,
A1383, and A1384
7
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
Characteristic Definitions
Power-On Time
When the supply is ramped to its operating
voltage, the device requires a finite time to power its inter-
nal components before responding to an input magnetic field.
Power-On Time, tPO, is defined as: the time it takes for the out-
put voltage to settle within ±10% of its steady state value under
an applied magnetic field, after the power supply has reached its
minimum specified operating voltage, VCC(min), as shown in the
following chart.
Delay to Clamp
A large magnetic input step may cause the
clamp to overshoot its steady state value. The Delay to Clamp,
tCLP, is defined as: the time it takes for the output voltage to
settle within ±1% of its steady state value, after initially passing
through its steady state voltage, as shown in the following chart.
Quiescent Voltage Output
In the quiescent state (no significant
magnetic field: B = 0 G), the output, VOUT(Q), has a constant
ratio to the supply voltage, VCC, throughout the entire operating
ranges of VCC and ambient temperature, TA.
Guaranteed Quiescent Voltage Output Range
The quiescent
voltage output, VOUT(Q), can be programmed around its nominal
value of 2.5 V, within the guaranteed quiescent voltage range
limits: VOUT(Q)(min) and VOUT(Q)(max). The available guaran-
teed programming range for VOUT(Q) falls within the distributions
of the initial, VOUT(Q)init, and the maximum programming code
for setting VOUT(Q), as shown in the following diagram.
Average Quiescent Voltage Output Step Size
The average qui-
escent voltage output step size for a single device is determined
using the following calculation:
V
OUT(Q)maxcode –VOUT(Q)init
2n–1
Step
VOUT(Q) =
.
(1)
where:
n is the number of available programming bits in the trim
range,
2n–1 is the value of the maximum programming code in the
range, and
VOUT(Q)maxcode is the quiescent voltage output at code 2
n–1.
Quiescent Voltage Output Programming Resolution
The pro-
gramming resolution for any device is half of its programming
step size. Therefore, the typical programming resolution will be:
Err
PGVOUT(Q)(typ)
= 0.5 × StepVOUT(Q)(typ)
.
(2)
V
+t
VCC
VCC(min.)
VOUT
90% VOUT
0
t1= time at which power supply reaches
minimum specified operating voltage
t2= time at which output voltage settles
within ±10% of its steady state value
under an applied magnetic field
t1
t2
tPO
VCC(typ.)
V
t
Magnetic Input
VOUT
0
t1= time at which output voltage initially
reaches steady state clamp voltage
t2= time at which output voltage settles to
within 1% of steady state clamp voltage
Note: Times apply to both high clamp
(shown) and low clamp.
VCLP(HIGH)
t1
t2
tCLP
VOUT(Q)(max)
VOUT(Q)(min)
VOUT(Q)init(typ)
Guaranteed Output
Programming
Range, VOUT(Q)
Distribution for
Max Code VOUT(Q)
Distribution for
VOUT(Q)init
相关PDF资料 |
PDF描述 |
|---|---|
| A1382EUA-T | MAGNETIC FIELD SENSOR-HALL EFFECT, 4.35-4.65V, RECTANGULAR, THROUGH HOLE MOUNT |
| A1382LLHLT-T | MAGNETIC FIELD SENSOR-HALL EFFECT, 4.35-4.65V, RECTANGULAR, SURFACE MOUNT |
| A1392SEHLT-T | MAGNETIC FIELD SENSOR-HALL EFFECT, 3.1V, RECTANGULAR, SURFACE MOUNT |
| A1393SEHLT-T | MAGNETIC FIELD SENSOR-HALL EFFECT, 3.1V, RECTANGULAR, SURFACE MOUNT |
| A1642LKTN-I2-T | MAGNETIC FIELD SENSOR-HALL EFFECT, 3-100mT, RECTANGULAR, THROUGH HOLE MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A1383EUATI-T | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Programmable Linear Hall Effect Sensors with Analog Output Available in a Miniature Thin Profile Surface Mount Package |
| A1383LLHLT-T | 功能描述:IC SENSOR HALL EFFECT SOT23-W RoHS:是 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:A138x 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR |
| A1383LLHLX-T | 制造商:Allegro MicroSystems 功能描述:LIMITED FIELD PROGRAMMABLE LIN 制造商:ALLEGRO MICROSYSTEMS, LLC 功能描述:IC HALL EFFECT SENSOR SOT-23W |
| A1383LUA-T | 功能描述:IC SENSOR HALL EFFECT PREC 3-SIP RoHS:是 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:A138x 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR |
| A1383LUATI-T | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Programmable Linear Hall Effect Sensors with Analog Output Available in a Miniature Thin Profile Surface Mount Package |
发布紧急采购，3分钟左右您将得到回复。