- 您现在的位置：买卖IC网 > PDF目录253936 > A22E-S-03 PUSHBUTTON SWITCH, 3PST, MOMENTARY, 10A, 24VDC, PANEL MOUNT PDF资料下载
参数资料
| 型号： | A22E-S-03 |
| 元件分类： | 开关 |
| 英文描述： | PUSHBUTTON SWITCH, 3PST, MOMENTARY, 10A, 24VDC, PANEL MOUNT |
| 文件页数： | 6/17页 |
| 文件大小： | 4248K |
| 代理商： | A22E-S-03 |
A22E
14
Installation
Mounting to the Panel
(1) Preparing the Panel
(2) Mounting the Operation Unit on the Panel
The panel dimensions are shown below.
The panel thickness must be 1 to 5 mm.
Always use a 25-mm-dia. Lock Ring for a 25-mm-dia. hole.
IP65 degree of protection will be lost if the 25-mm-dia. Lock Ring is not
used because of the larger size of a 25-mm-dia. hole.
When painting or coating the panel, make sure that the specified panel
dimensions apply to the panel after painting or coating.
Insert the Operation Unit from the front surface of the panel, insert the Lock Ring and
the mounting Ring from the terminal side, then tighten the Ring. Before tightening,
check that the rubber washer is present between the Operation Unit and the panel.
Align the Lock Ring with the groove in the casing, then insert the Lock Ring so that
its edge is located on the panel side.
Tighten the mounting nut at a torque of 0.98 to 1.96 Nm.
When using a Lock Ring, replace with the supplied Lock Ring, insert the projecting
part into the lock slot, and then tighten the mounting Ring.
(3) Mounting the Switch on the Operation Unit
Insert the Operation Unit into the Switch Unit, aligning the arrow mark
inscribed on the Case with the lever on the Switch Blocks, then move the
lever in the direction indicated by the arrow in the following figure.
(4) Removing the Switch
Move the lever in the direction indicated by the arrow in the following
figure, then pull the Operation Unit or the Switch Blocks.
Since the lever has a hole with an inside diameter of 6.5 mm, the lever can
be moved in the specified direction by inserting a screwdriver into the hole
and then moving the screwdriver.
22.3
+0.4
dia.
0.8R max.
With Lock Ring
Without Lock Ring
3.2
+0.2
0
24.1
+0.4
0
22.3
+0.4 dia.
25
+0.5 dia.
0
Hold here
Mounting Ring
Lock Ring
Rubber washer
Panel
Lock Ring
Projecting
part
1. When the panel cutout dimension is
25 dia., remove the supplied rubber
washer and mount the 25-dia. Ring
as shown below. (Since the A22Z-
R25 is not attached to the main body,
order separately.) When using a
Legend Plate (sold separately), do
not remove the rubber washer.
22 dia.
22.3 dia.
25 dia.
22.3 dia.
0.5
1.3
Panel
Lock Ring
Mounting Ring
25-dia. Ring
(A22Z-R25)
Operation Unit
Rubber washer
(mounted to
Operation Unit)
When not using a
Legend Plate,
remove the rubber
washer.
(If required)
Legend Plates for
Emergency Stop
(sold separately)
2. When the panel cutout
dimension is 30 dia., use resin
attachment A22Z-A30. Since it
is not attached to the main
body, order separately.
Operation Unit
Rubber washer
(mounted to
Operation Unit)
30-dia.
Resin Attachment
(A22Z-A30)
Rubber washer
(included)
Mounting
panel
Lock Ring
Mounting
Ring
Lever
Arrow mark
Operation
Unit
Screwdriver
相关PDF资料 |
PDF描述 |
|---|---|
| AP4N207TZBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT-THREADED |
| AP4N306SWBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT |
| A22-HB-11M | PUSHBUTTON SWITCH, DPST, MOMENTARY, 10A, 24VDC, PANEL MOUNT-THREADED |
| A22L-CR-T1-20M | PUSHBUTTON SWITCH, DPST, MOMENTARY, 10A, 24VDC, PANEL MOUNT-THREADED |
| A22L-GG-24A-01A | PUSHBUTTON SWITCH, SPST, MOMENTARY, 10A, 24VDC, PANEL MOUNT-THREADED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A22ES10 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:A22E-S-10 |
| A22E-S-10 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:A22E-S-10 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:A22E-S-10 |
| A22ES11 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSH DPST 10A 110V 制造商:OMRON Scientific Technologies Inc 功能描述:SWITCH, EMERGENCY STOP, SPST-NO/NC, 110VAC; Contact Configuration:SPST-NO / SPST-NC; Switch Operation:-; Contact Voltage DC Nom:24V; Contact Voltage AC Nom:110V; Contact Current Max:10A; Actuator Style:Round; Actuator Diameter:30mm 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Electromechanical Switch Emergency Stop Switch N.O./N.C. SPST 10A |
| A22E-S-11 | 功能描述:按钮开关 SPST-NO+NC 30mm HEAD Push-lock turn-reset RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0 |
| A22ES12 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:A22E-S-12 |
发布紧急采购，3分钟左右您将得到回复。