- 您现在的位置：买卖IC网 > PDF目录235902 > A3AA-90L1-00D PUSHBUTTON SWITCH, SPST, ALTERNATE, 4A, 30VDC, PANEL MOUNT PDF资料下载
参数资料
| 型号： | A3AA-90L1-00D |
| 元件分类： | 开关 |
| 英文描述： | PUSHBUTTON SWITCH, SPST, ALTERNATE, 4A, 30VDC, PANEL MOUNT |
| 文件页数： | 10/10页 |
| 文件大小： | 234K |
| 代理商： | A3AA-90L1-00D |
A3A
A3A
218
Installation
Mounting and Replacing the Pushbutton
Mounting Direction for the Pushbutton and Switch
Insert the catches of the Pushbutton into the grooves of the
Switch and push down on the Pushbutton until it is fixed securely
to the Switch.
With lighted models, the LED is built into the Switch and cannot
be replaced.
Catches on the Pushbutton
Grooves in the Switch
LED terminals
Removing the Pushbutton (Non-lighted Models Only)
To remove the Pushbutton, hold both the Pushbutton and the
Switch on the longer sides and pull the Pushbutton away from
the Switch. (If the catches on the Pushbutton are bent outwards,
it may result in malfunction.)
Catch
When replacing the Pushbutton, if the cap is held on the sides
with catches, internal components (e.g., plate) may come loose.
Be sure to hold the Pushbutton by the sides without catches (i.e.,
the longer sides of the Switch) when removing.
Mounting Switch on a Panel
Mount Leaf Spring
Press the leaf spring into the fitted groove on the upper surface of
the Switch. For an easier fitting, first fit one side of the leaf spring,
then press the other side into the fitting groove.
Leaf spring
fitting groove
Switch
Note:
Be sure to fit the leaf spring exactly into the groove, and do
not allow it to slip out of the groove.
Mount Flange on Panel
Insert the flange from the front surface of the panel.
Panel
Flange
Guide
The flange has two opposing guides to facilitate its insertion into the
panel cutout hole. Be sure the flange does not remain tilted with re-
spect to the panel surface after being installed.
Cross Section
Flange
Panel (t = 1 to 1.6 mm)
Note:
The mounting direction of the flange determines the
orientation of the Switch.
Fit Flange with Switch
While holding the flange, insert the opposing supports into the gaps
between the leaf spring and Switch on the longer sides of the hous-
ing, and fit the rectangular hole of the flange with the projections of
the switch housing.
Support
Panel
Projection
Note:
Completely remove any burrs on the panel cutout surface;
otherwise, the flange and Switch will not attach solidly.
Removing Switch
Insert a small flat-bladed screwdriver or tweezers into the flange
support exposed on the rear of the panel. Pry up on each side to pull
out the Switch.
Panel
Flat-bladed screwdriver
or tweezers
Note:
Do not pry up the flange support more than necessary or
the switch holding portions may be damaged.
相关PDF资料 |
PDF描述 |
|---|---|
| A3AA-91K1-00EG | PUSHBUTTON SWITCH, SPST, MOMENTARY, 4A, 30VDC, THROUGH HOLE-STRAIGHT |
| A3AT-90A1-00G | PUSHBUTTON SWITCH, SPDT, MOMENTARY, 2A, 30VDC, PANEL MOUNT |
| A3CT-90A1-06G | PUSHBUTTON SWITCH, SPDT, MOMENTARY, 1A, 30VDC, PANEL MOUNT-THREADED |
| A10003RSZQE | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.35A, 125VDC, PANEL MOUNT-THREADED |
| A10005MNMCG | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3AA90L100DNC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSH SPST-NO 6A 125V |
| A3AA90L100EG | 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:ASSY.L.P.B.INCLD.FLANGE/SPRING |
| A3AA-90L1-00EG | 功能描述:按钮开关 ASSY.L.P.B.INCLD FLANGE/SPRING RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0 |
| A3AA90L100EGNC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSH SPST-NO 6A 125V |
| A3AA90L100ER | 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:ASSY.L.P.B.INCLD.FLANGE/SPRING |
发布紧急采购，3分钟左右您将得到回复。