- 您现在的位置：买卖IC网 > PDF目录19049 > A3C-3004 (Omron Electronics Inc-IA Div)TIGHTENING TOOL PDF资料下载
参数资料
| 型号： | A3C-3004 |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 12/14页 |
| 文件大小： | 0K |
| 描述： | TIGHTENING TOOL |
| 标准包装： | 1 |
| 系列： | A3C |
| 附件类型： | 紧固工具 |
| 其它名称： | A3C3004 A3C3004NC |
A3C
Safety Precautions
Refer to Safety Precautions for All Pushbutton Switches .
CAUTION
Do not apply a voltage higher than the maximum
rated operating voltage between the lamp terminals,
as there is a risk that the incandescent lamp or LED
lamp will be damaged, and the Pushbutton will be
ejected.
When replacing the incandescent lamp, first turn OFF
the power supply, and then wait 10 minutes before
performing replacement, as the lamp is still hot
immediately after the power is turned OFF, so there
is a risk of burns.
Precautions for Correct Use
Mounting
Using Microloads
? Using a standard load switch for opening and closing a microload
circuit may cause wear on the contacts. Use the switch within the
operating range. (Refer to the diagram below.) Even when using
microload models within the operating range shown below, if inrush
current occurs when the contact is opened or closed, it may cause
the contact surface to become rough, and so decrease life
expectancy. Therefore, insert a contact protection circuit where
necessary. The minimum applicable load is the N-level reference
value. This value indicates the malfunction reference level for the
reliability level of 60% ( λ 60) (conforming to JIS C5003). The
equation, λ 60 = 0.5 x 10 ? 6 /times indicates that the estimated
malfunction rate is less than 1/2,000,000 with a reliability level of
60%.
? To prevent electric shock or a fire, always make sure that the power
is turned OFF before mounting, removing, or wiring the Switch, or
30
0.15mA
26mA
100mA
performing maintenance.
? Do not tighten the mounting ring excessively using pliers or a similar
24
tool. Excessive tightening may damage the mounting ring.
(Tightening torque: 0.20 to 0.39 N·m {20 gf to 40 gf})
Wiring
Microload
area
Standard
load area
? When wiring, use wires of a size appropriate for the applied voltage
and carry current. Perform soldering correctly under the conditions
given below. Using the Switch with the wires soldered incorrectly
12
Invalid
area
may cause the terminals to become abnormally hot and cause a
fire.
5
1mA
100mA 150mA
1. Soldering iron tip temperature: 350 ° C max. within 3 seconds.
2. Dip soldering: At 350 ° C within 3 seconds.
0
0.1
1
10
100 1,000
Current (mA)
Wait for one minute after soldering before exerting any external
force on the solder.
? Use a non-corrosive rosin liquid for the flux.
? Perform wiring so that the wire sheaths do not come into contact
with the Switch. If this is unavoidable, use wires that can withstand
LED
? Resistance to limit the LED current is provided internally and so an
external resistance is not required.
temperatures of 100 ° C min.
? After wiring to the Switch has been completed, ensure an
appropriate insulation distance.
Operating Environment
? Do not use in locations that are subject to dust, oil, or metal filings
Rated voltage
5 VDC
12 VDC
24 VDC
Internal limiting resistance
33 Ω
270 Ω
1,600 Ω
as these may penetrate the interior of the Switch and cause
malfunction.
12
相关PDF资料 |
PDF描述 |
|---|---|
| 140-0000-958 | TOOL BODY SOLDERING FOR .086 |
| 164TL5 | SWITCH UNIT ALT ILLUM RECT |
| 164SL5 | SWITCH UNIT ALT ILLUM SQ |
| 164SL | SWITCH UNIT MOM ILLUM SQ |
| 164TL | SWITCH UNIT MOM ILLUM RECT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3C3004NC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:TIGHTENING TOOL |
| A3C-32DA-2DSA | 功能描述:集管和线壳 Obsolete RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| A3C-32DA-2DSA(71) | 功能描述:集管和线壳 32P DR STRT RECPT 3MM LEAD LENGTH RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| A3C-32DA-2DSA(74) | 功能描述:集管和线壳 32P M PIN HEAD DR LP STRAIGHT TYPE GOLD RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| A3C-32DA-2DSC | 功能描述:CONN RECEPT 32POS 2MM GOLD DIP RoHS:否 类别:连接器，互连式 >> 矩形- 接头，插座，母插口 系列:A3 标准包装:37 系列:- 连接器类型:插座 触点类型：:母形插口 位置数:16 加载位置的数目:全部 间距:0.079"（2.00mm） 行数:2 行间距:0.079"（2.00mm） 安装类型:表面贴装 端子:焊接 紧固型:- 特点:- 触点表面涂层:金 触点涂层厚度:15µin（0.38µm） 颜色:自然色 包装:散装 其它名称:SPE1033 |
发布紧急采购，3分钟左右您将得到回复。