- 您现在的位置：买卖IC网 > PDF目录253954 > A3DJ-90A1-00EG PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, PANEL MOUNT PDF资料下载
参数资料
| 型号： | A3DJ-90A1-00EG |
| 元件分类： | 开关 |
| 英文描述： | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, PANEL MOUNT |
| 文件页数： | 8/9页 |
| 文件大小： | 220K |
| 代理商： | A3DJ-90A1-00EG |
A3D
A3D
27
Insulation Cover Mounting Dimensions
A3D-3002
8.9 dia.
Note:
1. The diagram above shows the rectangular model as a
representative example.
2. Unless specified, there is a tolerance of
±0.4 mm for
dimensions.
After securing the Switch to the panel using the mounting nut,
pass the lead wires through the holes in the Insulation Cover
before performing wiring. Hold the Insulation Cover so that the
cylindrical hole is facing the Switch, and insert the lead wires
from the end with the barriers.
After wiring is completed, mount the Insulation Cover by pushing
it into the Switch.
Legend Plate Mounting Dimensions
Rectangular
A3DJ-5201
Square
A3DA-5201
Round
A3DT-5201
5.8 dia.
Note:
1. The thickness is 0.8 mm.
2. Since the legend plate is made of polycarbonate, use alcohol-based paints such as melanin, phthalic acid, or acryl paint when
marking the legend.
Installation
Mounting and Replacing the Pushbutton
Mounting Direction for the Pushbutton and Switch
Projection
Switch
Pushbutton
Curved claw
Align the curved claw on the outside of the protruding part of the
Pushbutton with the projection on the upper part of the Switch and
insert.
Apply a pressure between 9.8 and 24.5 N.
Note:
If the terminals of the LED lamp become bent, it may be
impossible to fit them into the LED lamp terminal holes.
Ensure that the terminals are straight when they are
inserted. Be sure to insert the lamp terminals for round
models with the correct orientation. Inserting the terminals
with the reverse orientation will result in damage.
Removing the Pushbutton
Recessed
portions
Hold the recessed portions on the cap of the Pushbutton and pull.
Note:
Do not use tools such as pliers to remove the Pushbutton as
this may damage the cap.
Panel Mounting
Using the Mounting Nut
Insert the Switch from the front of the panel. Mount the mounting nut
from the terminal end of the Switch and tighten it.
Tighten the nut to a torque 0.20 to 0.39 N
m.
If soldering is used, mount the mounting nut first. Lead wires and
mounds of solder may make it impossible to mount the nut after sol-
dering.
Panel
Mounting nut
Socket Mounting
After securing the Switch to the panel using the mounting nut, insert
the Socket into the Switch.
When inserting the Socket, align the positioning groove of the
Socket with the projecting part of the Switch.
Panel
Projecting part of Switch
Positioning groove of Socket
相关PDF资料 |
PDF描述 |
|---|---|
| A3DJ-90B1-00EG | PUSHBUTTON SWITCH, SPST, ALTERNATE, 0.1A, 30VDC, PANEL MOUNT |
| AP2N603SZBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT |
| AP4C200TCBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, THROUGH HOLE-STRAIGHT |
| AP4N007SZBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT |
| AM1711KF | SNAP ACTING/LIMIT SWITCH, MOMENTARY, 0.5A, 125VDC, 5.74mm, PANEL MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3DJ90A100EGNC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSH SPST-NO 0.1A 30V |
| A3DKA-1006G | 功能描述:IDC CABLE-AKR10A/ AE10G / APK10A RoHS:否 类别:电缆组件 >> 矩形 系列:- 标准包装:10 系列:- 连接器类型:插口至插口 位置数:50 行数:2 间距 - 连接器:- 间距 - 线缆:- 长度:5.67'（1.73m） 特点:- 颜色:灰色，带状 屏蔽:无屏蔽 使用:SCSI 电缆端接:IDC 触点表面涂层:- 触点涂层厚度:- |
| A3DKA-1006M | 功能描述:IDC CABLE- AKR10A/ AE10M / APK10 RoHS:否 类别:电缆组件 >> 矩形 系列:- 标准包装:10 系列:- 连接器类型:插口至插口 位置数:50 行数:2 间距 - 连接器:- 间距 - 线缆:- 长度:5.67'（1.73m） 特点:- 颜色:灰色，带状 屏蔽:无屏蔽 使用:SCSI 电缆端接:IDC 触点表面涂层:- 触点涂层厚度:- |
| A3DKA-1018G | 功能描述:IDC CABLE-AKR10A/ AE10G / APK10A RoHS:否 类别:电缆组件 >> 矩形 系列:- 标准包装:10 系列:- 连接器类型:插口至插口 位置数:50 行数:2 间距 - 连接器:- 间距 - 线缆:- 长度:5.67'（1.73m） 特点:- 颜色:灰色，带状 屏蔽:无屏蔽 使用:SCSI 电缆端接:IDC 触点表面涂层:- 触点涂层厚度:- |
| A3DKA-1018M | 功能描述:IDC CABLE- AKR10A/ AE10M / APK10 RoHS:否 类别:电缆组件 >> 矩形 系列:- 标准包装:10 系列:- 连接器类型:插口至插口 位置数:50 行数:2 间距 - 连接器:- 间距 - 线缆:- 长度:5.67'（1.73m） 特点:- 颜色:灰色，带状 屏蔽:无屏蔽 使用:SCSI 电缆端接:IDC 触点表面涂层:- 触点涂层厚度:- |
发布紧急采购，3分钟左右您将得到回复。