- 您现在的位置：买卖IC网 > PDF目录223291 > A3DT-90B1-00ER PUSHBUTTON SWITCH, SPST, ALTERNATE, 0.1A, 30VDC, PANEL MOUNT PDF资料下载
参数资料
| 型号： | A3DT-90B1-00ER |
| 元件分类： | 开关 |
| 英文描述： | PUSHBUTTON SWITCH, SPST, ALTERNATE, 0.1A, 30VDC, PANEL MOUNT |
| 文件页数： | 8/9页 |
| 文件大小： | 220K |
| 代理商： | A3DT-90B1-00ER |
A3D
A3D
27
Insulation Cover Mounting Dimensions
A3D-3002
8.9 dia.
Note:
1. The diagram above shows the rectangular model as a
representative example.
2. Unless specified, there is a tolerance of
±0.4 mm for
dimensions.
After securing the Switch to the panel using the mounting nut,
pass the lead wires through the holes in the Insulation Cover
before performing wiring. Hold the Insulation Cover so that the
cylindrical hole is facing the Switch, and insert the lead wires
from the end with the barriers.
After wiring is completed, mount the Insulation Cover by pushing
it into the Switch.
Legend Plate Mounting Dimensions
Rectangular
A3DJ-5201
Square
A3DA-5201
Round
A3DT-5201
5.8 dia.
Note:
1. The thickness is 0.8 mm.
2. Since the legend plate is made of polycarbonate, use alcohol-based paints such as melanin, phthalic acid, or acryl paint when
marking the legend.
Installation
Mounting and Replacing the Pushbutton
Mounting Direction for the Pushbutton and Switch
Projection
Switch
Pushbutton
Curved claw
Align the curved claw on the outside of the protruding part of the
Pushbutton with the projection on the upper part of the Switch and
insert.
Apply a pressure between 9.8 and 24.5 N.
Note:
If the terminals of the LED lamp become bent, it may be
impossible to fit them into the LED lamp terminal holes.
Ensure that the terminals are straight when they are
inserted. Be sure to insert the lamp terminals for round
models with the correct orientation. Inserting the terminals
with the reverse orientation will result in damage.
Removing the Pushbutton
Recessed
portions
Hold the recessed portions on the cap of the Pushbutton and pull.
Note:
Do not use tools such as pliers to remove the Pushbutton as
this may damage the cap.
Panel Mounting
Using the Mounting Nut
Insert the Switch from the front of the panel. Mount the mounting nut
from the terminal end of the Switch and tighten it.
Tighten the nut to a torque 0.20 to 0.39 N
m.
If soldering is used, mount the mounting nut first. Lead wires and
mounds of solder may make it impossible to mount the nut after sol-
dering.
Panel
Mounting nut
Socket Mounting
After securing the Switch to the panel using the mounting nut, insert
the Socket into the Switch.
When inserting the Socket, align the positioning groove of the
Socket with the projecting part of the Switch.
Panel
Projecting part of Switch
Positioning groove of Socket
相关PDF资料 |
PDF描述 |
|---|---|
| A3G2-6 | WIRE TERMINAL |
| A455FEH1-15 | QUARTZ CRYSTAL RESONATOR, 96 MHz |
| A52R-30MHZ | CRYSTAL OSCILLATOR, CLOCK, 30 MHz, ACMOS OUTPUT |
| A59-1 | 10 MHz - 700 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| A5916T | 5 MHz - 900 MHz RF/MICROWAVE DIRECTIONAL COUPLER, 1.4 dB INSERTION LOSS-MAX |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3E-44D-2R | 功能描述:集管和线壳 44POS IDC SOCKET RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| A3E-44D-2R(11) | 功能描述:集管和线壳 44P F RECEPT ID TYPE W/ POLAR GUIDE GOLD RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| A3E-44PA-2DSA | 功能描述:CONN HEADER 44POS 2MM GOLD DIP RoHS:否 类别:连接器，互连式 >> 矩形- 接头，公引脚 系列:A3E 视频文件:Mezzselect Tool - Another Geek Moment 标准包装:50 系列:BERGSTIK®，MezzSelect™，基础增强型 触点类型：:公形引脚 连接器类型:接头，无罩 位置数:52 加载位置的数目:全部 间距:0.100"（2.54mm） 行数:2 行间距:0.100"（2.54mm） 触点接合长度:0.266"（6.75mm） 安装类型:通孔 端子:焊接 紧固型:- 特点:- 触点表面涂层:金，GXT™ 触点涂层厚度:30µin（0.76µm） 颜色:黑 包装:散装 配套产品:71609-326LF-ND - CONN RCPT 52POS .100" DL SMD RA68683-426LF-ND - CONN RCPT 52POS .100" DBL TIN68046-326LF-ND - CONN RCPT 52POS .100" DBL SMD69154-326LF-ND - CONN RCPT 52POS .100" DBL SMD68683-226LF-ND - CONN RCPT 52POS .100" DBL GOLD68683-226-ND - CONN RCPT 52POS .100" DBL GOLD68683-326LF-ND - CONN RCPT 52POS .100" DBL GOLD68046-226LF-ND - CONN RCPT 52POS .100" DBL SMD68683-626LF-ND - CONN RCPT 52POS .100" DBL GOLD87606-326-ND - CONN RCPT 52POS .100" DBL PCB更多... |
| A3E-44PA-2DSA(71) | 功能描述:集管和线壳 44P STRT PIN HDR SELECTIVE GOLD PLT RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| A3E-44PA-2DSA(81) | 功能描述:集管和线壳 44P M PIN HEADER STRAIGHT TYPE GOLD RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
发布紧急采购，3分钟左右您将得到回复。