Datasheet Information
5-2
Revision 13
Revision 11
(March 2012)
Note indicating that A3P015 is not recommended for new designs has been added.
addition, extensive on-chip programming circuitry allows for rapid, single-voltage
(3.3 V) programming of IGLOO devices via an IEEE 1532 JTAG interface" (SAR
34687).
The reference to guidelines for global spines and VersaTile rows, given in the
the DIN waveform; the Rise and Fall time label has been changed to tDIN (35430).
Added values for minimum pulse width and removed the FRMAX row from
Use the software to determine the FRMAX for the device you are using (SARs
37279, 29269).
Revision 10
(September 2011)
were revised to clarify that although no existing security measures can give an
absolute guarantee, Microsemi FPGAs implement the best security available in the
industry (SAR 32865).
The value of 34 I/Os for the QN48 package in A3P030 was added to the
"I/Os PerThe Y security option and Licensed DPA Logo were added to the
"ProASIC3product is covered by a DPA counter-measures license from Cryptography
Research (SAR 32151).
voltage in programming mode was changed from "3.0 to 3.6" to "3.15 to 3.45" (SAR
30666). It was corrected in v2.0 of this datasheet in April 2007 but inadvertently
changed back to “3.0 to 3.6 V” in v1.4 in August 2009. The following changes were
VCCPLL analog power supply (PLL) was changed from "1.4 to 1.6" to "1.425 to
1.575" (SAR 33850).
For VCCI and VMV, values for 3.3 V DC and 3.3 V DC Wide Range were corrected.
The correct value for 3.3 V DC is "3.0 to 3.6 V" and the correct value for 3.3 V Wide
Range is "2.7 to 3.6" (SAR 33848).
update to restore values to the correct columns. Previously the Slew Rate column
was missing and data were aligned incorrectly (SAR 34034).
tables were revised for clarification. They now state that the minimum drive strength
for the default software configuration when run in wide range is ±100 A. The drive
strength displayed in software is supported in normal range only. For a detailed I/V
curve, refer to the IBIS models (SAR 25700).
Revision
Changes
Page