- 您现在的位置：买卖IC网 > PDF目录11652 > A5366CA (Allegro Microsystems Inc)IC SMOKE DETECTOR PHOTO 16-DIP PDF资料下载
参数资料
| 型号： | A5366CA |
| 厂商： | Allegro Microsystems Inc |
| 文件页数： | 13/13页 |
| 文件大小： | 0K |
| 描述： | IC SMOKE DETECTOR PHOTO 16-DIP |
| 标准包装： | 25 |
| 类型： | 烟雾探测器 |
| 输入类型： | 光电 |
| 输出类型： | 电压 |
| 电流 - 电源： | 12mA |
| 安装类型： | 通孔 |
| 封装/外壳： | 16-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 16-DIP |
| 包装： | 管件 |
Photoelectric Smoke Detector
with Interconnect and Timer
A5366
9
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
increased to one pulse every OSC CAP cycle and the STROBE
pin is always active. To exit this mode, the TEST pin should be
floated, or returned to VSS, for at least one OSC CAP cycle.
Alarm Indications
Alarm conditions include: local smoke detection, a remote alarm,
low battery, or degraded chamber sensitivity. These are indicated
by a combination of horn and LED signals, which continue until
the alarm condition is resolved. A local alarm always overrides
a remote alarm, and a local or remote alarm will inhibit warning
signals for low battery or degraded chamber.
During a local or a remote alarm condition, the horn output is a
continuous modulated tone (temporal horn pattern), nominally:
0.5 s on, 0.5 s off, 0.5 s on, 0.5 s off, 0.5 s on, and 1.5 s off. The
visible LED distinguishes a local alarm from a remote alarm.
During a local alarm, the LED blinks every 0.5 s (nominally), but
during a remote alarm, the LED is disabled and does not blink.
The degraded-chamber test occurs periodically (nominally every
43 s). During this test, the gain of the photoamplifier is switched
to the high (supervisory) level, set by C1. The device expects
that the photodiode will receive enough reflected background
light in the chamber to cause an alarm condition. If a faulty, dirty,
or obstructed chamber prevents this for two consecutive tests,
the device signals degraded chamber with one short (nominally
10 ms) horn chirp every 43 s, essentially halfway between LED
flashes. The condition is resolved when the chamber is either
cleared or cleaned.
The low-battery test also occurs periodically (also nominally
every 43 s, but offset from the degraded-chamber test). Dur-
ing this test, the load of the LED is applied to the battery, and
a resistive divider off VDD is compared to an internal band-gap
reference. If VDD is below the threshold, the device signals low
battery with one short (nominally 10 ms) horn chirp every 43 s,
occurring almost simultaneously with the visible LED flash. The
condition is resolved when the battery is replaced.
相关PDF资料 |
PDF描述 |
|---|---|
| MCIMX233CAG4B | MPU 32BIT I.MX233 IND 128LQFP |
| MC908MR8CPE | IC MCU 8K FLASH 256RAM 28-DIP |
| MAX1455AUE+ | IC AUTO SNSR SIGNAL COND 16TSSOP |
| MCF51AC256ACLKE | MCU 32BIT 256K FLASH CAN 80-LQFP |
| MC908AP32CFBE | IC MCU 32K FLASH 8MHZ 44QFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A5366CA-T | 功能描述:IC SMOKE DETECTOR PHOTO 16-DIP RoHS:是 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG，串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:管件 |
| A5366CLWTR-T | 功能描述:IC SMOKE DETECTOR PHOTO 16-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG，串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:管件 |
| A5367 | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:The A5367 is a low-current, BiCMOS circuit providing all of the required features for an ionization-type smoke detector. |
| A5367CA | 功能描述:IC SMOKE DETECTOR ION 16-DIP RoHS:否 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG，串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:管件 |
| A5367CA-T | 功能描述:IC SMOKE DETECTOR ION 16-DIP RoHS:是 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG，串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。