- 您现在的位置：买卖IC网 > PDF目录18570 > ACM2520-301-2P (TDK Corporation)CHOKE COMMON MODE 300 OHM SMD PDF资料下载
参数资料
| 型号： | ACM2520-301-2P |
| 厂商： | TDK Corporation |
| 文件页数： | 2/11页 |
| 文件大小： | 0K |
| 描述： | CHOKE COMMON MODE 300 OHM SMD |
| 产品培训模块： | EMC Components |
| RoHS指令信息： | RoHS Material |
| 产品目录绘图： | ACM2520 Series Top ACM2520 Series Bottom |
| 标准包装： | 1 |
| 系列： | ACM |
| 滤波器类型： | 数据，信号线 |
| 线路数： | 2 |
| 电流： | 400mA |
| DC 电阻(DCR)： | 最大 350 毫欧 |
| 阻抗： | 300 欧姆 |
| 安装类型： | 表面贴装 |
| 尺寸/尺寸： | 0.098" L x 0.079" W（2.50mm x 2.00mm） |
| 高度（最大）： | 0.051"（1.30mm） |
| 封装/外壳： | 水平式，4 J 形引线 |
| 工作温度： | -25°C ~ 85°C |
| 包装： | 标准包装 |
| 产品目录页面： | 1852 (CN2011-ZH PDF) |
| 其它名称： | 445-2966-6 |
(2/11)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130723 / e9712_acm.fm
相关PDF资料 |
PDF描述 |
|---|---|
| ACH-40.000MHZ-EK | OSCILLATOR 40.000MHZ 5V 1/2-SIZE |
| ABM10-19.200MHZ-E20-T | CRYSTAL 19.2000 MHZ 10PF SMD |
| WMF1S22K-F | CAP FILM 0.022UF 100VDC AXIAL |
| 3352K-1-101LF | POT 100 OHM THUMBWHEEL CERM ST |
| ASEMPC-12.352MHZ-Z-T | OSC 12.352 MHZ CMOS MEMS SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACM2520-301-2PT | 制造商:TDK 功能描述: 制造商:TDK 功能描述:Ferrite Beads Wirewound Common Mode Filter 300Ohm 100MHz 400mA 1008 T/R |
| ACM2520-301-2P-T | 制造商:TDK 功能描述:Common mode choke SMD 2520 300R |
| ACM2520-301-2P-T002 | 功能描述:电磁干扰滤波器 300ohms 0.35ohms 0.4A RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03 |
| ACM2520-451-2P | 功能描述:电磁干扰滤波器 450ohms @ MHz .35A 2.5 mm x 2 mm RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03 |
| ACM2520-451-2P-T | 制造商:TDK 功能描述:Common mode choke SMD 2520 450R |
发布紧急采购，3分钟左右您将得到回复。