- 您现在的位置：买卖IC网 > PDF目录21830 > ACM3225-161-2P-T (TDK Corporation)CHOKE COMMON MODE 160 OHM SMD PDF资料下载
参数资料
| 型号： | ACM3225-161-2P-T |
| 厂商： | TDK Corporation |
| 文件页数： | 2/11页 |
| 文件大小： | 0K |
| 描述： | CHOKE COMMON MODE 160 OHM SMD |
| 标准包装： | 1,000 |
| 系列： | ACM |
| 滤波器类型： | 数据，信号线 |
| 线路数： | 2 |
| 电流： | 350mA |
| DC 电阻(DCR)： | 最大 200 毫欧 |
| 阻抗： | 160 欧姆 |
| 安装类型： | 表面贴装 |
| 尺寸/尺寸： | 0.177" L x 0.126" W（4.50mm x 3.20mm） |
| 高度（最大）： | 0.091"（2.30mm） |
| 封装/外壳： | 1210（3225 公制），6 引线 |
| 工作温度： | -25°C ~ 85°C |
| 包装： | 带卷 (TR) |
(2/11)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130723 / e9712_acm.fm
相关PDF资料 |
PDF描述 |
|---|---|
| UB216KKW01CF-3JB-RO | SWITCH PUSHBUTTON SPDT 5A 125V |
| G13AW | SWITCH TOGGLE SPDT STR 10.5 MM |
| UB215SKG03CF-2B | SWITCH PUSH SPDT 0.4VA 28V |
| G13AP | SWITCH TOGGLE SPDT .4VA PCB |
| B32529C3474K289 | FILM CAP 0.4700UF 10% 250V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACM3225-161-2P-T001 | 功能描述:电磁干扰滤波器 160PF RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03 |
| ACM3225-271-2P | 功能描述:电磁干扰滤波器 270ohms 100MHz 50volts RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03 |
| ACM3225-271-2P-T | 功能描述:CHOKE COMMON MODE 270 OHM SMD RoHS:否 类别:滤波器 >> 共模扼流圈 系列:ACM 标准包装:2 系列:DKLP-1 滤波器类型:电源线 线路数:2 电感:40mH 电流:5A DC 电阻(DCR):126 毫欧 阻抗:- 安装类型:底座安装，引线 尺寸/尺寸:3.150" L x 3.150" W（80.00mm x 80.00mm） 高度（最大）:2.000"（50.80mm） 封装/外壳:- 工作温度:-25°C ~ 100°C 包装:散装 |
| ACM3225-271-2P-T001 | 功能描述:电磁干扰滤波器 270PF RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03 |
| ACM3225-601-2P | 功能描述:电磁干扰滤波器 600ohms 100MHz 50volts RoHS:否 制造商:STMicroelectronics 电容:12 pF 电路类型: 最大直流电流: 最大直流电阻: 电压额定值:6 V 容差: 端接类型:SMD/SMT 工作温度范围:- 30 C to + 85 C 系列:EMIF03 |
发布紧急采购，3分钟左右您将得到回复。