- 您现在的位置：买卖IC网 > PDF目录67356 > ACPM-5002-BLK 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | ACPM-5002-BLK |
| 元件分类： | 放大器 |
| 英文描述： | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| 封装： | 3 X 3 MM, GREEN, PLASTIC, SMT, 10 PIN |
| 文件页数： | 10/13页 |
| 文件大小： | 289K |
| 代理商： | ACPM-5002-BLK |
6
Metallization
Solder Mask Opening
Solder Paste Stencil Aperture
PCB Design Guidelines
The recommended PCB land pattern is shown in gures
on the left side. The substrate is coated with solder mask
between the I/O and conductive paddle to protect the
gold pads from short circuit that is caused by solder
bleeding/bridging.
Stencil Design Guidelines
A properly designed solder screen or stencil is required
to ensure optimum amount of solder paste is deposited
onto the PCB pads.
The recommended stencil layout is shown here. Reducing
the stencil opening can potentially generate more voids.
On the other hand, stencil openings larger than 100% will
lead to excessive solder paste smear or bridging across
the I/O pads or conductive paddle to adjacent I/O pads.
Considering the fact that solder paste thickness will
directly aect the quality of the solder joint, a good choice
is to use laser cut stencil composed of 0.100mm(4mils) or
0.127mm(5mils) thick stainless steel which is capable of
producing the required ne stencil outline.
0.65
0.45
0.50
0.60
1.50
1.30
0.525
0.55
0.45
1.10
0.60
0.35
0.475
0.30
0.60
0.35
0.55
0.45
on 0.5mm pitch
0.3mm
0.475
connected to a inner layer
through a via hole for a
better isolation between
CPL_IN(ISO) and RFout
相关PDF资料 |
PDF描述 |
|---|---|
| ACPM-5004-TR1 | 1710 MHz - 1785 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-5008-BLK | 880 MHz - 915 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-5008-TR1 | 880 MHz - 915 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-5201-BLK | 1920 MHz - 1980 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-5202-BLK | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACPM-5002-SE1 | 制造商:Avago Technologies 功能描述:PAM UMTS BAND2 WITH CPL 3X3MM - Tape and Reel |
| ACPM-5002-SG1 | 功能描述:RF Amplifier IC Cellular, CDMA 1.85GHz ~ 1.91GHz 10-SMD 制造商:broadcom limited 系列:- 包装:散装 零件状态:过期 频率:1.85GHz ~ 1.91GHz P1dB:- 增益:28.5dB 噪声系数:- RF 类型:手机，CDMA 电压 - 电源:3.2 V ~ 4.2 V 电流 - 电源:72mA 测试频率:1.85GHz 封装/外壳:10-SMD 模块 供应商器件封装:10-SMD 标准包装:1 |
| ACPM-5002-TC1 | 功能描述:RF Amplifier IC Cellular, CDMA 1.85GHz ~ 1.91GHz 10-SMD 制造商:broadcom limited 系列:- 包装:散装 零件状态:过期 频率:1.85GHz ~ 1.91GHz P1dB:- 增益:28.5dB 噪声系数:- RF 类型:手机，CDMA 电压 - 电源:3.2 V ~ 4.2 V 电流 - 电源:72mA 测试频率:1.85GHz 封装/外壳:10-SMD 模块 供应商器件封装:10-SMD 标准包装:1 |
| ACPM-5002-TR1 | 制造商:Avago Technologies 功能描述:3X3MM PAM UMTS BAND2 WITH CPL |
| ACPM-5004-BLK | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:Multimode PA - UMTS 1700MHz PA (1710-1785MHz) 3x3mm Power Amplifier Module with Coupler |
发布紧急采购，3分钟左右您将得到回复。