- 您现在的位置：买卖IC网 > PDF目录97841 > ACPM-5005-BLK 815 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | ACPM-5005-BLK |
| 元件分类： | 放大器 |
| 英文描述： | 815 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| 封装： | 3 X 3 MM, GREEN, PLASTIC, SMT, 10 PIN |
| 文件页数： | 2/13页 |
| 文件大小： | 303K |
| 代理商： | ACPM-5005-BLK |
10
Handling and Storage
ESD (Electrostatic Discharge)
Electrostatic discharge occurs naturally in the environ-
naturally in the environ-
ment. With the increase in voltage potential, the outlet of
neutralization or discharge will be sought. If the acquired
discharge route is through a semiconductor device, de-
through a semiconductor device, de-
de-
structive damage will result.
ESD countermeasure methods should be developed and
used to control potential ESD damage during handling in
a factory environment at each manufacturing site.
MSL (Moisture Sensitivity Level)
Plastic encapsulated surface mount package is sensitive to
damage induced by absorbed moisture and temperature.
Avago Technologies follows JEDEC Standard J-STD 020B.
Each component and package type is classified for
moisture sensitivity by soaking a known dry package at
Moisture Classification Level and Floor Life
MSL Level
Floor Life (out of bag) at factory ambient =< 30°C/60% RH or as stated
1
Unlimited at =< 30°C/85% RH
2
1 year
2a
4 weeks
3
168 hours
4
72 hours
5
48 hours
5a
24 hours
6
Mandatory bake before use. After bake, must be reflowed within the time limit specified on the label
Note :
1. The MSL Level is marked on the MSL Label on each shipping bag.
various temperatures and relative humidity, and times.
After soak, the components are subjected to three con-
secutive simulated reflows.
The out of bag exposure time maximum limits are deter-
mined by the classification test describe below which cor-
responds to a MSL classification level 6 to 1 according to
the JEDEC standard IPC/JEDEC J-STD-020B and J-STD-033.
ACPM-5005-TR1 is MSL3. Thus, according to the J-STD-033
p.11 the maximum Manufacturers Exposure Time (MET)
for this part is 168 hours. After this time period, the part
would need to be removed from the reel, de-taped and
then re-baked. MSL classification reflow temperature for
the ACPM-5005-TR1 is targeted at 260°C +0/-5°C. Figure
and table on next page show typical SMT profile for
maximum temperature of 260 +0/-5°C.
相关PDF资料 |
PDF描述 |
|---|---|
| ACPM-5005-TR1 | 815 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-5013-BLK | 777 MHz - 798 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-5013-TR1 | 777 MHz - 798 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-5205-TR1 | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-5208-BLK | 880 MHz - 915 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACPM-5005-SE1 | 制造商:Avago Technologies 功能描述:PAM UMTS BAND5 WITH CPL 3X3MM - Tape and Reel |
| ACPM-5005-SG1 | 功能描述:RF Amplifier IC Cellular, CDMA 815MHz ~ 849MHz 10-SMD 制造商:broadcom limited 系列:- 包装:散装 零件状态:过期 频率:815MHz ~ 849MHz P1dB:- 增益:28dB 噪声系数:- RF 类型:手机，CDMA 电压 - 电源:3.2 V ~ 4.2 V 电流 - 电源:490mA 测试频率:849MHz 封装/外壳:10-SMD 模块 供应商器件封装:10-SMD 标准包装:1 |
| ACPM-5005-TC1 | 功能描述:RF Amplifier IC Cellular, CDMA 815MHz ~ 849MHz 10-SMD 制造商:broadcom limited 系列:- 包装:散装 零件状态:过期 频率:815MHz ~ 849MHz P1dB:- 增益:28dB 噪声系数:- RF 类型:手机，CDMA 电压 - 电源:3.2 V ~ 4.2 V 电流 - 电源:490mA 测试频率:849MHz 封装/外壳:10-SMD 模块 供应商器件封装:10-SMD 标准包装:1 |
| ACPM-5005-TR1 | 制造商:Avago Technologies 功能描述:3X3MM PAM UMTS BAND5 WITH CPL |
| ACPM-5007 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:LTE Band7 (2500-2570 MHz) 3 x 3 mm Power Amplifi er Module |
发布紧急采购，3分钟左右您将得到回复。