- 您现在的位置：买卖IC网 > PDF目录97841 > ACPM-7816-TR1 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | ACPM-7816-TR1 |
| 元件分类： | 放大器 |
| 英文描述： | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| 封装： | 4 X 4 MM, 1.10 MM HEIGHT, SMT, 10 PIN |
| 文件页数： | 3/23页 |
| 文件大小： | 209K |
| 代理商： | ACPM-7816-TR1 |
11
cdma 2000 1xRTT Characterization
System Description
CDMA2000 is the TIA’s standard
for third generation (3G) technol-
ogy and is an evolution of the
IS-95 CDMA format. CDMA2000
includes 1X RTT in the single-
carrier mode and 3X RTT in the
multi-carrier mode. This paper
describes the CDMA2000 1X RTT
approach and its performance
with Agilent 4x4 CDMA PAs,
ACPM-7816. CDMA2000 1X RTT,
being an extension of the IS-95
standard, has a chip rate of
1.2288Mchip/s. However, in
1xRTT, the reverse link transmits
more than one code channel to
accommodate the high data
rates. The minimum configura-
tion consists of a reverse pilot
(R-Pilot) channel for synchro-
nous detection by the Base
Transceiver System (BTS) and a
reverse fundamental channel
(R-FCH) for voice. Additional
channels such as the reverse
supplemental channels (R-SCHs)
and the reverse dedicated
channel (R-DCCH) are used to
send data or signaling informa-
tion. Channels can exist at
different rates and power levels.
Table 1 shows the transmitter
specification in CDMA2000
reverse link.
Typical channel configurations below are based on the transmitter test condition in the reverse link.
1) “Basic” Voice only configuration
– R-PICH @ -5.3 dB
– R-FCH @ -1.5 dB 9.6 kbps
2) Voice and Data configuration
– R-PICH @ -5.3 dB
– R-FCH @ -4.54 dB 9.6 kbps
– R-SCH1 @ -4.54 dB 9.6 kbps
Specification
Spread Rate1
ERP at Maximum
Lower limit +23 dBm
Output Power
Upper limit +30 dBm
Minimum Controlled Output Power
-50 dBm/1.23 MHz
Waveform Quality Factor and Frequency Accuracy
>0.944
SR1, Band Class 0(Cellular band)
SR1, Band Class1(PCS band)
885 kHz to 1.98 MHz
1.25 MHz to 1.98 MHz
Less stringent of -42 dBc/30 kHz
or -54 dBm/1.23 MHz
1.98 MHz to 3.125 MHz
1.98 MHz to 2.25 MHz
Less stringent of -54 dBc/30 kHz
Less stringent of -50 dBc/30 kHz
or -54 dBm/1.23 MHz
3.125 MHz to 5.625 MHz
2.25 MHz to 6.25 MHz
-13 dBm/100 kHz
-13 dBm/1 MHz
Spurious Emission at
Maximum RF output
power offset frequency
within the range
3) Voice and Control configuration
– R-PICH @ -5.3 dB
– R-FCH @ -3.85 dB 9.6 kbps
– R-DCCH @ -3.85 dB 9.6 kbps
4) Control channel only configuration
– R-PICH @ -5.3 dB
– R-DCCH @ -1.5 dB 9.6 kbps
Table 1. Transmitter Specification in Reverse Link.
相关PDF资料 |
PDF描述 |
|---|---|
| ACPM-7821-BLK | 898 MHz - 925 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7822-BLK | 898 MHz - 925 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-7822-TR1 | 898 MHz - 925 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-7833-BLK | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7833-TR1 | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACPM-7821 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:4 x 4 Power Amplifier Module for J-CDMA (898 - 925 MHz) |
| ACPM-7821-BLK | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:4 x 4 Power Amplifier Module for J-CDMA (898 - 925 MHz) |
| ACPM-7821-TR1 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:4 x 4 Power Amplifier Module for J-CDMA (898 - 925 MHz) |
| ACPM-7822 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:JCDMA 4x4 Power Amplifier Module (898-925MHz) |
| ACPM-7822-BLK | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:JCDMA 4x4 Power Amplifier Module (898-925MHz) |
发布紧急采购，3分钟左右您将得到回复。