参数资料
| 型号： | AD10242BZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 2/16页 |
| 文件大小： | 0K |
| 描述： | IC ADC DUAL 12BIT 68-CLCC |
| 标准包装： | 1 |
| 位数： | 12 |
| 采样率（每秒）： | 40M |
| 数据接口： | 并联 |
| 转换器数目： | 2 |
| 功率耗散（最大）： | 2W |
| 电压电源： | 模拟和数字，双 ± |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 68-CLCC |
| 供应商设备封装： | 68-CLCC（24.13x24.13） |
| 包装： | 托盘 |
| 输入数目和类型： | 6 个单端，双极 |
| 配用： | AD10242/PCB-ND - KIT EVAL PCB FOR AD10242 |
AD10242
–10–
REV. C
THEORY OF OPERATION
Refer to the functional block diagram. The AD10242 employs
three monolithic ADI components per channel (AD9632, OP279,
and AD9042), along with multiple passive resistor networks
and decoupling capacitors to fully integrate a complete 12-bit
analog-to-digital converter.
The input signal is first passed through a precision laser trimmed
resistor divider, allowing the user to externally select operation
with a full-scale signal of
±0.5 V, ±1.0 V, or ±2.0 V by choosing
the proper input terminal for the application. The result of
the resistor divider is to apply a full-scale input of approximately
0.4 V to the noninverting input of the internal AD9632 amplifier.
The AD9632 provides the dc-coupled level shift circuit required
for operation with the AD9042 ADC. Configuring the amplifier
in a noninverting mode, the ac signal gain can be trimmed to
provide a constant input to the ADC centered around the inter-
nal reference voltage of the AD9042. This allows the converter
to be used in multiple system applications without the need for
external gain and level shift circuitry normally requiring trim.
The AD9632 was chosen for its superior ac performance and
input drive capabilities. These two specifications have limited
the ability of many amplifiers to drive high performance ADCs.
As new amplifiers are developed, pin compatible improve-
ments are planned to incorporate the latest operational ampli-
fier technology.
The OP279 provides the buffer and inversion of the internal
reference of the AD9042 in order to supply the summing node
of the AD9632 input amplifier. This dc voltage is then summed
with the input voltage and applied to the input of the AD9042
ADC. The reference voltage of the AD9042 is designed to track
internal offsets and drifts of the ADC and is used to ensure
matching over an extended temperature range of operation.
APPLYING THE AD10242
Encoding the AD10242
The AD10242 is designed to interface with TTL and CMOS
logic families. The source used to drive the ENCODE pin(s)
must be clean and free from jitter. Sources with excessive jitter
will limit SNR and overall performance.
0.01 F
TTL OR CMOS
SOURCE
ENCODE
AD10242
Figure 6. Single-Ended TTL/CMOS Encode
The AD10242 encode inputs are connected to a differential
input stage (see Figure 4). With no input connected to either
the ENCODE or
ENCODE input, the voltage dividers bias the
inputs to 1.6 V. For TTL or CMOS usage, the encode source
should be connected to ENCODE (Pins 29 and/or 51).
ENCODE
(Pins 28 and/or 52) should be decoupled using a low inductance
or microwave chip capacitor to ground. Devices such as AVX
05085C103MA15, a 0.01
F capacitor, work well.
Performance Improvements
It is possible to improve the performance of the AD10242
slightly by taking advantage of the internal characteristics of the
amplifier and converter combination. By increasing the 5 V
supply slightly, the user may be able to gain up to a 5 dB improve-
ment in SFDR over the entire frequency range of the converter.
It is not recommended to exceed 5.5 V on the analog supplies
since there are no performance benefits beyond that range and
care should be taken to avoid the absolute maximum ratings.
ANALOG INPUT FREQUENCY – MHz
60
0
510
40
20
ENCODE = 40MSPS
AIN = 1dBFS
SNR (dB)
30
50
10
20
29.2
34.5
52.5
60.95
70
80
SFDR (dBFS)
SNR,
WORST
SPUR
–
dB,
dBc
TPC 13. SNR/Harmonics to AIN > Nyquist MSPS
INPUT FREQUENCY – MHz
0.5
3.0
05
2.0
1.5
1.0
2.5
10
15
20
25
30
40
0
–0.5
45
50
55
35
FUNDAMENTAL
LEVELS
–
dBFS
ENCODE = 40MSPS
TPC 14. Gain Flatness vs. Input Frequency
相关PDF资料 |
PDF描述 |
|---|---|
| AD10465BZ | IC ADC DUAL 14BIT 68-CLCC |
| AD13280AZ | IC ADC 12BIT 68CLCC |
| AD1377KD | IC ADC SNGL 16BIT 32-CDIP |
| AD1380KD | IC ADC SNGL 16BIT 32-CDIP |
| AD1555BP | IC ADC PGA 24BIT LN 28PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD10242TZ | 制造商:Analog Devices 功能描述:ADC Dual 40Msps 12-bit Parallel 68-Pin CLCC 制造商:Analog Devices 功能描述:ADC DUAL 40MSPS 12-BIT PARALLEL 68CLCC - Bulk 制造商:Analog Devices 功能描述:IC ADC DUAL 12BIT 68-CLCC 制造商:Analog Devices Inc. 功能描述:Analog to Digital Converters - ADC Dual 12 Bit 41 MSPS MCM 制造商:Analog Devices 功能描述:CONVERTER - ADC |
| AD10242TZ/883B | 功能描述:模数转换器 - ADC IC Dual 12-Bit 41MSPS MCM RoHS:否 制造商:Analog Devices 通道数量: 结构: 转换速率: 分辨率: 输入类型: 信噪比: 接口类型: 工作电源电压: 最大工作温度: 安装风格: 封装 / 箱体: |
| AD1024-48F | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Very Low Cost, 20W DIN Rail Mount Single Output AC/DC Power Supplies |
| AD1024F | 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Very Low Cost, 20W DIN Rail Mount Single Output AC/DC Power Supplies |
| AD10263R | 制造商:Hitachi 功能描述: |
发布紧急采购，3分钟左右您将得到回复。