参数资料
型号: AD10465BZ
厂商: Analog Devices Inc
文件页数: 3/24页
文件大小: 0K
描述: IC ADC DUAL 14BIT 68-CLCC
标准包装: 1
位数: 14
采样率(每秒): 65M
数据接口: 并联
转换器数目: 2
功率耗散(最大): 3.9W
电压电源: 模拟和数字,双 ±
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 68-CLCC
供应商设备封装: 68-CLCC(24.13x24.13)
包装: 托盘
输入数目和类型: 6 个单端,双极
AD10465
Rev. A | Page 11 of 24
TERMINOLOGY
Analog Bandwidth
The analog input frequency at which the spectral power of the
fundamental frequency (as determined by the FFT analysis) is
reduced by 3 dB.
Aperture Delay
The delay between a differential crossing of ENCODE and
ENCODE, and the instant at which the analog input is sampled.
Aperture Uncertainty (Jitter)
The sample-to-sample variation in aperture delay.
Differential Nonlinearity
The deviation of any code from an ideal 1 LSB step.
ENCODE Pulse Width/Duty Cycle
Pulse width high is the minimum amount of time that the
ENCODE pulse should be left in Logic 1 state to achieve rated
performance; pulse width low is the minimum time ENCODE
pulse should be left in low state. At a given clock rate, these
specs define an acceptable encode duty cycle.
Harmonic Distortion
The ratio of the rms signal amplitude to the rms value of the
worst harmonic component.
Integral Nonlinearity
The deviation of the transfer function from a reference line
measured in fractions of 1 LSB using a “best straight line”
determined by a least square curve fit.
Minimum Conversion Rate
The encode rate at which the SNR of the lowest analog signal
frequency drops by no more than 3 dB below the guaranteed
limit.
Maximum Conversion Rate
The encode rate at which parametric testing is performed,
above which converter performance can degrade.
Output Propagation Delay
The delay between a differential crossing of ENCODE and
ENCODE, and the time when all output data bits are within
valid logic levels.
Overvoltage Recovery Time
The amount of time required for the converter to recover to
0.02% accuracy after an analog input signal of the specified
percentage of full scale is reduced to midscale.
Power Supply Rejection Ratio
The ratio of a change in input offset voltage to a change in
power supply voltage.
Signal-to-Noise and Distortion (SINAD)
The ratio of the rms signal amplitude (set at 1 dB below full
scale) to the rms value of the sum of all other spectral compo-
nents, including harmonics but excluding dc. Can be reported
in dB (that is, relative to signal level) or in dBFS (always related
back to converter full scale).
Signal-to-Noise Ratio (Without Harmonics)
The ratio of the rms signal amplitude (set at 1 dB below full
scale) to the rms value of the sum of all other spectral compo-
nents, excluding the first five harmonics and dc. Can be
reported in dB (that is, relative to signal level) or in dBFS
(always related back to converter full scale).
Spurious-Free Dynamic Range
The ratio of the rms signal amplitude to the rms value of the
peak spurious spectral component. The peak spurious
component may or may not be a harmonic.
Transient Response
The time required for the converter to achieve 0.03% accuracy
when a one-half, full-scale step function is applied to the analog
input.
Two-Tone Intermodulation Distortion Rejection
The ratio of the rms value of either input tone to the rms value
of the worst third-order intermodulation product; reported in
dBFS.
相关PDF资料
PDF描述
AD13280AZ IC ADC 12BIT 68CLCC
AD1377KD IC ADC SNGL 16BIT 32-CDIP
AD1380KD IC ADC SNGL 16BIT 32-CDIP
AD1555BP IC ADC PGA 24BIT LN 28PLCC
AD1671KQ IC ADC SNGL 12BIT 28-CDIP
相关代理商/技术参数
参数描述
AD10465PCB 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Channel, 14-Bit, 65 MSPS A/D Converter with Analog Input Signal Conditioning
AD1047 制造商:Carlo Gavazzi 功能描述:PQT-90 BASE
AD1048-24FS 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Very Low Cost, 36 - 48W DIN Rail Mount Single Output AC/DC Power Supplies
AD1048-48FS 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Very Low Cost, 36 - 48W DIN Rail Mount Single Output AC/DC Power Supplies
AD1048FS 制造商:MPD 制造商全称:MicroPower Direct, LLC 功能描述:Very Low Cost, 36 - 48W DIN Rail Mount Single Output AC/DC Power Supplies