参数资料
| 型号： | AD5063BRMZ-1 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC DAC 16BIT 2.7-5.5V 10MSOP |
| 标准包装： | 50 |
| 系列： | nanoDAC™ |
| 设置时间： | 1µs |
| 位数： | 16 |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 1 |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 管件 |
| 输出数目和类型： | 1 电压，单极；1 电压，双极 |
| 采样率（每秒）： | 333k |
| 产品目录页面： | 781 (CN2011-ZH PDF) |
AD5063
Rev. C | Page 16 of
20
APPLICATIONS
Table 7. Recommended Precision References for the AD5063
Part No.
Initial
Accuracy
(mV max)
Temperature Drift
(ppm/°C max)
CHOOSING A REFERENCE FOR THE AD5063
To achieve optimum performance of the AD5063, thought
should be given to the choice of a precision voltage reference.
The AD5063 has one reference input, VREF. The voltage on the
reference input is used to supply the positive input to the DAC;
therefore, any error in the reference is reflected in the DAC.
0.1 Hz to 10 Hz
Noise (μV p-p typ)
±2
3 (R-8)
8
±2
3 (R-8)
3.4
3 (R-8)
10
±3
3 (SC-70)
10
There are four possible sources of error when choosing a voltage
reference for high accuracy applications: initial accuracy, ppm
drift, long-term drift, and output voltage noise. Initial accuracy
on the output voltage of the DAC leads to a full-scale error in the
DAC. To minimize these errors, a reference with high initial
accuracy is preferred. Also, choosing a reference with an output
trim adjustment, such as the ADR423, allows a system designer to
trim out system errors by setting a reference voltage to a voltage
other than the nominal. The trim adjustment can also be used at
any point within the operating temperature range to trim out error.
9 (TSOT-23)
8
BIPOLAR OPERATION USING THE AD5063
The AD5063 has been designed for single-supply operation, but
a bipolar output range is also possible by using the circuit shown
in Figure 37. This circuit yields an output voltage range of ±4.096 V.
Rail-to-rail operation at the amplifier output is achievable using
AD8675/AD8031/AD8032 or an OP196.
The output voltage for any input code can be calculated as
Because the supply current required by the AD5063 is extremely
low, the parts are ideal for low supply applications. The ADR395
voltage reference is recommended; it requires less than 100 μA of
quiescent current and can, therefore, drive multiple DACs in one
system, if required. It also provides very good noise performance
at 8 μV p-p in the 0.1 Hz to 10 Hz range.
×
+
×
×
=
R1
R2
V
R1
R2
R1
D
V
DD
O
536
,
65
where D represents the input code in decimal (0 to 65,536).
With VREF = 5 V, R1 = R2 = 30 kΩ
AD5063
3-WIRE
SERIAL
INTERFACE
SYNC
SCLK
DIN
7V
5V
VOUT = 0V TO 5V
ADR395
04
76
6-
0
36
V
5
65536
10
×
=
D
V
O
This is an output voltage range of ±5 V, with 0x0000 corresponding
to a 5 V output and 0xFFFF corresponding to a +5 V output.
04
76
6-
03
7
AD5063
DACGND
VVREF
DD
OUT
SCLK
DIN
SYNC
+5V
+4.096V
EXTERNAL
OP AMP
BIPOLAR
OUTPUT
10
F
SERIAL
INTERFACE
0.1
F
0.1
F
INV
RINV
+5V
–5V
RFB
AGND
+
Figure 36. ADR395 as a Reference to AD5063
Long-term drift is a measure of how much the reference drifts
over time. A reference with a tight long-term drift specification
ensures that the overall solution remains relatively stable during
its entire lifetime. The temperature coefficient of a reference’s
output voltage affects INL, DNL, and TUE. A reference with a
tight temperature coefficient specification should be chosen to
reduce the temperature dependence of the DAC output voltage
on ambient conditions.
Figure 37. Bipolar Operation
In high accuracy applications, which have a relatively low
tolerance for noise, reference output voltage noise needs to be
considered. It is important to choose a reference with as low an
output noise voltage as practical for the system noise resolution
required. Precision voltage references, such as the ADR435,
produce low output noise in the 0.1 Hz to 10 Hz region. Exam-
ples of some recommended precision references for use as the
supply to the AD5063 are shown in Table 7.
相关PDF资料 |
PDF描述 |
|---|---|
| VE-J0P-MZ-F4 | CONVERTER MOD DC/DC 13.8V 25W |
| VI-B0T-MY-F2 | CONVERTER MOD DC/DC 6.5V 50W |
| AD5722RBREZ | IC DAC DUAL 12BIT 1LSB 24TSSOP |
| AD8300ARZ | IC DAC 12BIT 3V SRL-IN 8-SOIC |
| AD5556CRUZ | IC DAC 14BIT PARALL IN 28-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5063BRMZ-11 | 制造商:AD 制造商全称:Analog Devices 功能描述:Fully Accurate 16-Bit VOUT nanoDAC SPI Interface 2.7 V to 5.5 V in an MSOP |
| AD5063BRMZ-1-REEL7 | 功能描述:IC DAC 16BIT 2.7-5.5V 10MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:nanoDAC™ 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| AD5063BRMZ-1-REEL71 | 制造商:AD 制造商全称:Analog Devices 功能描述:Fully Accurate 16-Bit VOUT nanoDAC SPI Interface 2.7 V to 5.5 V in an MSOP |
| AD5063BRMZ-REEL7 | 功能描述:IC DAC 16BIT 2.7-5.5V 10MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:nanoDAC™ 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| AD5063BRMZ-REEL71 | 制造商:AD 制造商全称:Analog Devices 功能描述:Fully Accurate 16-Bit VOUT nanoDAC SPI Interface 2.7 V to 5.5 V in an MSOP |
发布紧急采购，3分钟左右您将得到回复。