- 您现在的位置：买卖IC网 > PDF目录1890 > AD5247BKSZ100-1RL7 (Analog Devices Inc)IC POT DGTL 100K 128POS SC70-6 PDF资料下载
参数资料
| 型号： | AD5247BKSZ100-1RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC POT DGTL 100K 128POS SC70-6 |
| 标准包装： | 1 |
| 接片： | 128 |
| 电阻（欧姆）： | 100k |
| 电路数： | 1 |
| 温度系数： | 标准值 45 ppm/°C |
| 存储器类型： | 易失 |
| 接口： | I²C |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-TSSOP，SC-88，SOT-363 |
| 供应商设备封装： | SC-70-6 |
| 包装： | 标准包装 |
| 其它名称： | AD5247BKSZ100-1RL7DKR |
AD5247
Data Sheet
Rev. F | Page 16 of 20
LEVEL SHIFTING FOR BIDIRECTIONAL INTERFACE
While most legacy systems can be operated at one voltage, a
new component can be optimized at another voltage. When
two systems operate the same signal at two different voltages,
proper level shifting is needed. For instance, users can employ
a 3.3 V E2PROM to interface with a 5 V digital potentiometer. A
level shifting scheme is needed to enable a bidirectional commu-
nication so that the setting of the digital potentiometer can be
of the level-shifting implementations. M1 and M2 can be any
N-channel signal FETs, or if VDD falls below 2.5 V, M1 and M2
can be low threshold FETs such as the FDV301N.
E2PROM
AD5247
SDA1
SCL1
D
G
RP
3.3V
5V
S
M1
SCL2
SDA2
RP
G
S
M2
VDD1 = 3.3V
VDD2 = 5V
D
03876-
035
Figure 36. Level-Shifting for Operation at Different Potentials
ESD PROTECTION
All digital inputs are protected with a series input resistor and
parallel Zener ESD structures as shown in Figure 37. This applies
to digital input pins (SDA and SCL).
340
GND
03876-
036
LOGIC
SDA/
SCL
Figure 37. ESD Protection of Digital Pins
TERMINAL VOLTAGE OPERATING RANGE
The AD5247 VDD and GND power supply defines the boundary
conditions for proper 3-terminal digital potentiometer operation.
Supply signals present on Terminal A and Terminal W that exceed
VDD or GND are clamped by the internal forward biased diodes
A
VDD
W
GND
03876-
038
Figure 38. Maximum Terminal Voltages Set by VDD and GND
MAXIMUM OPERATING CURRENT
At low code values, the user should be aware that, due to low
resistance values, the current through the RDAC might exceed
the 5 mA limit. In Figure 39, a 5 V supply is placed on the wiper,
and the current through Terminal W and Terminal B is plotted
with respect to code. A line is also drawn denoting the 5 mA
current limit. Note that at low code values (particularly for the
5 kΩ and 10 kΩ options), the current level increases signifi-
cantly. Care should be taken to limit the current flow between
W and B in this state to a maximum continuous current of
5 mA and a maximum pulse current of no more than 20 mA.
Otherwise, degradation or possible destruction of the internal
switch contacts can occur.
CODE (Decimal)
I WB
CURRE
NT
(
mA)
0
0.01
0.1
1
10
16
32
48
64
80
96
112
128
100
5mA CURRENT LIMIT
RAB = 5k
RAB = 10k
RAB = 100k
RAB = 50k
03876-
039
Figure 39. Maximum Operating Current
POWER-UP SEQUENCE
Because the ESD protection diodes limit the voltage compliance
at Terminal A and Terminal W (see Figure 38), it is important
to power VDD/GND before applying any voltage to Terminal A
and Terminal W; otherwise, the diode is forward-biased such
that VDD is powered unintentionally and can affect the rest of the
user’s circuit. The ideal power-up sequence is in the following
order: GND, VDD, digital inputs, VA, and VW. The relative order
of powering VA and VW and the digital inputs is not important
as long as they are powered after VDD/GND.
相关PDF资料 |
PDF描述 |
|---|---|
| AD5251BRU10 | IC DCP DUAL 10K 64POS 14TSSOP |
| AD5254BRU1 | IC DGTL POT QUAD 1K 20-TSSOP |
| AD5258BRMZ10 | IC POT DGTL I2C 10K 64P 10MSOP |
| AD5259BCPZ5-R7 | IC POT DGTL 5K 256POS 10LFCSP |
| AD5262BRU20 | IC POT DUAL 20K 256POS 16TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5247BKSZ100-2RL7 | 功能描述:IC POT DGTL 100K 128POS SC70-6 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5247BKSZ100-R2 | 制造商:Analog Devices 功能描述:DIGITAL POTENTIOMETER - Tape and Reel |
| AD5247BKSZ100-RL7 | 功能描述:IC POT DGTL 100K 128POS SC70-6 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5247BKSZ10-1RL7 | 制造商:Analog Devices 功能描述:128-POSITION I2C?-COMPATIBLE DIGITAL POTENTIOMETER - Tape and Reel 制造商:Analog Devices 功能描述:ANAAD5247BKSZ10-1RL7 7-BIT I2C DIGIPOT |
| AD5247BKSZ10-2RL7 | 功能描述:IC DGTL POT 128POS 10K SC70-6 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
发布紧急采购，3分钟左右您将得到回复。