- 您现在的位置：买卖IC网 > PDF目录373874 > AD5258BRMZ50-R71 (Analog Devices, Inc.) 18 Bit, 1.25MSPS Single Channel Delta-Sigma ADC Single 64-HTQFP -40 to 85 PDF资料下载
参数资料
| 型号： | AD5258BRMZ50-R71 |
| 厂商： | Analog Devices, Inc. |
| 英文描述： | 18 Bit, 1.25MSPS Single Channel Delta-Sigma ADC Single 64-HTQFP -40 to 85 |
| 中文描述： | 非易失，I2C兼容的64工位，数字电位器 |
| 文件页数： | 19/24页 |
| 文件大小： | 1299K |
| 代理商： | AD5258BRMZ50-R71 |
AD5258
ESD PROTECTION OF DIGITAL PINS AND
RESISTOR TERMINALS
The AD5258 V
DD
, V
LOGIC
, and GND power supplies define the
boundary conditions for proper 3-terminal and digital input
operation. Supply signals present on Terminal A, Terminal B,
and Terminal W that exceed V
DD
or GND are clamped by the
internal forward biased ESD protection diodes (see Figure 41).
Digital Input SCL and Digital Input SDA are clamped by ESD
protection diodes with respect to V
LOGIC
and GND as shown in
Figure 42.
Rev. 0 | Page 19 of 24
GND
A
W
B
V
DD
0
Figure 41. Maximum Terminal Voltages Set by V
DD
and GND
GND
SCL
SDA
V
LOGIC
0
Figure 42. Maximum Terminal Voltages Set by V
LOGIC
and GND
POWER-UP SEQUENCE
Because the ESD protection diodes limit the voltage compliance
at Terminal A, Terminal B, and Terminal W (see Figure 41), it is
important to power GND/V
DD
/V
LOGIC
before applying any
voltage to Terminal A, Terminal B, and Terminal W; otherwise,
the diode is forward biased such that V
DD
and V
LOGIC
are
powered unintentionally and may affect the user’s circuit. The
ideal power-up sequence is in the following order: GND, V
DD
,
V
LOGIC
, digital inputs, and then V
A
, V
B
, V
W
. The relative order of
powering V
A
, V
B
, V
W
, and the digital inputs is not important as
long as they are powered after GND/V
DD
/V
LOGIC
.
LAYOUT AND POWER SUPPLY BYPASSING
It is good practice to employ compact, minimum lead length
layout design. The leads to the inputs should be as direct as
possible with minimum conductor length. Ground paths should
have low resistance and low inductance.
Similarly, it is also good practice to bypass the power supplies
with quality capacitors for optimum stability. Supply leads to
the device should be bypassed with disc or chip ceramic
capacitors of 0.01 μF to 0.1 μF. Low ESR 1 μF to 10 μF tantalum
or electrolytic capacitors should also be applied at the supplies
to minimize any transient disturbance and low frequency ripple
(see Figure 43). The digital ground should also be joined
remotely to the analog ground at one point to minimize the
ground bounce.
V
DD
GND
V
DD
C2
10
μ
F
C1
0.1
μ
F
AD5258
+
0
Figure 43. Power Supply Bypassing
MULTIPLE DEVICES ON ONE BUS
The AD5258 has two three-state configurable Address Pins
AD0 and AD1. The state of these two pins is registered upon
power-up and decoded into a corresponding I
2
C 7-bit address
(see Table 5). This allows up to nine devices on the bus to be
written to, or read from, independently. In the case that the pin
is assigned to be floated, the static voltage will be V
LOGIC
/2.
EVALUATION BOARD
An evaluation board, along with all necessary software, is
available to program the AD5258 from any PC running
Windows 98/2000/XP. The graphical user interface, as shown
in Figure 44, is straightforward and easy to use. More detailed
information is available in the user manual that comes with the
board.
0
Figure 44. AD5258 Evaluation Board Software
相关PDF资料 |
PDF描述 |
|---|---|
| AD5258BRMZ501 | Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer |
| AD5258 | Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer |
| AD5258BRMZ1-R71 | Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer |
| AD5258BRMZ10-R71 | Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer |
| AD5258BRMZ100-R71 | Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5258EVAL | 功能描述:BOARD EVAL FOR AD5258 DGTL POT RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:数字电位器 嵌入式:- 已用 IC / 零件:AD5258 主要属性:- 次要属性:- 已供物品:板 相关产品:AD5258BRMZ1-ND - IC POT DGTL I2C1K 64P 10MSOPAD5258BRMZ10-ND - IC POT DGTL I2C 10K 64P 10MSOPAD5258BRMZ100-ND - IC POT DGTL I2C 100K 64P 10MSOPAD5258BRMZ50-ND - IC POT DGTL I2C 50K 64P 10MSOPAD5258BRMZ1-R7-ND - IC POT DGTL I2C 1K 64P 10MSOPAD5258BRMZ10-R7-ND - IC POT DGTL I2C 10K 64P 10MSOPAD5258BRMZ50-R7-ND - IC POT DGTL I2C 50K 64P 10MSOPAD5258BRMZ100-R7-ND - IC POT DGTL I2C 100K 64P 10MSOP |
| AD5258EVAL2 | 制造商:AD 制造商全称:Analog Devices 功能描述:Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer |
| AD5259 | 制造商:AD 制造商全称:Analog Devices 功能描述:Nonvolatile, I2C-Compatible 256-Position, Digital Potentiometer |
| AD5259BCPZ100-R7 | 功能描述:IC POT DGTL 100K 256POS 10LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,300 系列:WiperLock™ 接片:257 电阻（欧姆）:100k 电路数:1 温度系数:标准值 150 ppm/°C 存储器类型:易失 接口:3 线 SPI（芯片选择） 电源电压:1.8 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-VDFN 裸露焊盘 供应商设备封装:8-DFN-EP（3x3） 包装:带卷 (TR) |
| AD5259BCPZ10-R7 | 功能描述:IC POT DGTL 10K 256POS 10LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。