参数资料
| 型号： | AD5273BRJ1-R2 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 1/24页 |
| 文件大小： | 0K |
| 描述： | IC DGTL POT 1K 64POS SOT23-8 |
| 标准包装： | 1 |
| 接片： | 64 |
| 电阻（欧姆）： | 1k |
| 电路数： | 1 |
| 温度系数： | 标准值 300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-8 |
| 供应商设备封装： | SOT-23-8 |
| 包装： | 剪切带 (CT) |
| 配用： | AD5273EVAL-ND - BOARD EVAL FOR AD5273 |
| 其它名称： | AD5273BRJ1-R2CT |
64-Position OTP Digital Potentiometer
AD5273
Rev. H
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
2002–2010 Analog Devices, Inc. All rights reserved.
FEATURES
64 positions
One-time programmable (OTP)1 set-and-forget
Resistance setting—low cost alternative over EEMEM
Unlimited adjustments prior to OTP activation
1 kΩ, 10 kΩ, 50 kΩ, 100 kΩ end-to-end terminal resistance
Compact 8-lead SOT-23 standard package
Ultralow power: IDD = 5 μA maximum
Fast settling time: tS = 5 μs typical during power-up
I2C-compatible digital interface
Computer software2 replaces microcontroller in
factory programming applications
Wide temperature range: 40°C to +105°C
Low operating voltage: 2.7 V to 5.5 V
OTP validation check function
APPLICATIONS
System calibrations
Electronics level settings
Mechanical potentiometers and trimmer replacement
Automotive electronics adjustments
Transducer circuit adjustments
Programmable filters up to 6 MHz BW3
GENERAL DESCRIPTION
The AD5273 is a 64-position, one-time programmable (OTP)
digital potentiometer4 that employs fuse link technology to
achieve permanent program setting. This device performs the
same electronic adjustment function as most mechanical
trimmers and variable resistors. It allows unlimited adjustments
before permanently setting the resistance values. The AD5273 is
programmed using a 2-wire, I2C-compatible digital control.
During write mode, a fuse blow command is executed after the
final value is determined, thereby freezing the wiper position at
a given setting (analogous to placing epoxy on a mechanical
trimmer). When the permanent setting is achieved, the value
does not change, regardless of the supply variations or environ-
mental stresses under normal operating conditions. To verify
the success of permanent programming, Analog Devices, Inc.,
patterned the OTP validation such that the fuse status can be
discerned from two validation bits in the read mode.
FUNCTIONAL BLOCK DIAGRAM
GND
I2C INTERFACE
AND
CONTROL LOGIC
A
W
B
WIPER
REGISTER
FUSE
LINK
VDD
AD0
SDA
SCL
AD5273
03224-001
Figure 1.
In addition, for applications that program the AD5273 at the
factory, Analog Devices offers device programming software2
running on Windows NT, Windows 2000, and Windows XP
operating systems. This software application effectively replaces
any external I2C controllers, which in turn enhances the user
system’s time-to-market.
The AD5273 is available in 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ
resistances and in a compact 8-lead SOT-23 standard package.
It operates from 40°C to +105°C.
Along with its unique OTP feature, the AD5273 lends itself
well to general digital potentiometer applications due to its
effective resolution, array resistance options, small footprint,
and low cost.
An AD5273 evaluation kit and software are available. The kit
includes the connector and cable that can be converted for
factory programming applications.
For applications that require dynamic adjustment of resistance
settings with nonvolatile EEMEM, users should refer to the
AD523x and AD525x families of nonvolatile memory digital
potentiometers.
1 OTP allows unlimited adjustments before permanent setting.
2 Analog Devices cannot guarantee the software to be 100% compatible to all
systems due to the wide variation in computer configurations.
3 Applies to 1 kΩ parts only.
4 The terms digital potentiometer, VR, and RDAC are used interchangeably.
相关PDF资料 |
PDF描述 |
|---|---|
| AD5273BRJ100-R2 | IC DGTL POT 100K 64POS SOT23-8 |
| 7WBD3306BMX1TCG | IC BUS SWITCH DUAL 1X1 8LLGA |
| LMK04031BISQE/NOPB | IC CLOCK CONDITIONER W/PLL 48LLP |
| AD5273BRJ50-R2 | IC DGTL POT 50K 64POS SOT23-8 |
| AD8400AR1 | IC DGTL POT 8BIT 1K 1CH 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5273BRJ1-REEL7 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD5273BRJ50-R2 | 功能描述:IC DGTL POT 50K 64POS SOT23-8 RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| AD5273BRJ50-REEL7 | 制造商:AD 制造商全称:Analog Devices 功能描述:64-Position OTP Digital Potentiometer |
| AD5273BRJZ100-R2 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD5273BRJZ100-R7 | 功能描述:IC POT DGTL 1K 64POS SOT23 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,300 系列:WiperLock™ 接片:257 电阻（欧姆）:100k 电路数:1 温度系数:标准值 150 ppm/°C 存储器类型:易失 接口:3 线 SPI（芯片选择） 电源电压:1.8 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-VDFN 裸露焊盘 供应商设备封装:8-DFN-EP（3x3） 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。