- 您现在的位置：买卖IC网 > PDF目录9424 > AD5292BRUZ-100 (Analog Devices Inc)IC DGTL POT 1024POS 20K 14TSSOP PDF资料下载
参数资料
| 型号： | AD5292BRUZ-100 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 30/32页 |
| 文件大小： | 0K |
| 描述： | IC DGTL POT 1024POS 20K 14TSSOP |
| 设计资源： | Variable Gain Noninverting Amplifier Using AD5292 and OP184 (CN0112) Variable Gain Inverting Amplifier Using AD5292 and OP184 (CN0113) Low Cost, High Voltage, Programmable Gain Instrumentation Amplifier Using AD5292 and AD8221 (CN0114) Programmable High Voltage Source with Boosted Output Current Using AD5292, OP184, and MOSFETs (CN0115) Programmable Bidirectional Current Source Using AD5292 and ADA4091-4 (CN0117) Logarithmic Audio Volume Control with Glitch Reduction Using AD5292 (CN0120) |
| 标准包装： | 96 |
| 接片： | 1024 |
| 电阻（欧姆）： | 100k |
| 电路数： | 1 |
| 温度系数： | 标准值 35 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 4 线串行 |
| 电源电压： | 9 V ~ 33 V，±9 V ~ 16.5 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 14-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 787 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页当前第30页第31页第32页
AD5291/AD5292
Rev. D | Page 7 of 32
Parameter
Symbol
Conditions
Min
Max
Unit
DYNAMIC CHARACTERISTICS5, 10
Bandwidth
BW
3 dB
kHz
RAB = 20 kΩ
520
RAB = 50 kΩ
210
RAB = 100 kΩ
105
Total Harmonic Distortion
THDW
VA = 1 V rms, VB = 0 V, f = 1 kHz
dB
RAB = 20 kΩ
93
RAB = 50 kΩ
101
RAB = 100 kΩ
106
VW Settling Time
tS
VA = 30 V, VB = 0 V, ±0.5 LSB error
band, initial code = zero scale, board
capacitance = 170 pF
Code = full-scale, normal mode
750
ns
Code = full-scale, R-Perf mode
2.5
μs
Code = half-scale, normal mode
μs
RAB = 20 kΩ
2.5
RAB = 50 kΩ
7
RAB = 100 kΩ
14
Code = half-scale, R-Perf mode
μs
RAB = 20 kΩ
5
RAB = 50 kΩ
9
RAB = 100 kΩ
16
Resistor Noise Density
eN_WB
Code = half-scale, TA = 25°C, 0 kHz to
200 kHz
nV/√Hz
RAB = 20 kΩ
10
RAB = 50 kΩ
18
RAB = 100 kΩ
27
1 Typical values represent average readings at 25°C, VDD = 15 V, VSS = 15 V, and VLOGIC = 5 V.
2 Resistor position nonlinearity error. R-INL is the deviation from an ideal value measured between the RWB at code 0x00B to code 0x3FF or between RWA at code 0x3F3 to
code 0x000. R-DNL measures the relative step change from ideal between successive tap positions. The specification is guaranteed in resistor performance mode, with
a wiper current of 1 mA for VA < 12 V and 1.2 mA for VA ≥ 12 V.
3 Resistor performance mode (see the Resistor Performance Mode section). The terms resistor performance mode and R-Perf mode are used interchangeably.
4 Guaranteed by design and characterization, not subject to production test.
5 INL and DNL are measured at VW with the RDAC configured as a potentiometer divider similar to a voltage output DAC. VA = VDD and VB = 0 V. DNL specification limits
of ±1 LSB maximum are guaranteed monotonic operating conditions.
6 Resistor Terminal A, Resistor Terminal B, and Resistor Terminal W have no limitations on polarity with respect to each other. Dual-supply operation enables ground-
referenced bipolar signal adjustment.
7 Different from operating current; supply current for fuse program lasts approximately 550 μs.
8 Different from operating current; supply current for fuse read lasts approximately 550 μs.
9 PDISS is calculated from (IDD × VDD) + (ISS × VSS) + (ILOGIC × VLOGIC).
10 All dynamic characteristics use VDD = 15 V, VSS = 15 V, and VLOGIC = 5 V.
RESISTOR PERFORMANCE MODE CODE RANGE
Table 5.
RAB = 20 kΩ
|VDD VSS| = 30 V to 33 V
|VDD VSS| = 26 V to 30 V
|VDD VSS| = 22 V to 26 V
|VDD VSS| = 21 V to 22 V
Resistor
Tolerance per
Code
RWB
RWA
RWB
RWA
RWB
RWA
RWB
RWA
1% R-Tolerance
From 0x15E
to 0x3FF
From 0x000
to 0x2A1
From 0x1F4
to 0x3FF
From 0x000
to 0x20B
From 0x1F4
to 0x3FF
From 0x000
to 0x20B
N/A
2% R-Tolerance
From 0x8C
to 0x3FF
From 0x000
to 0x373
From 0xB4
to 0x3FF
From 0x000
to 0x34B
From 0xFA
to 0x3FF
From 0x000
to 0x305
From 0xFA
to 0x3FF
From 0x000
to 0x305
3% R-Tolerance
From 0x5A
to 0x3FF
From 0x000
to 0x3A5
From 0x64
to 0x3FF
From 0x000
to 0x39B
From 0x78
to 0x3FF
From 0x000
to 0x387
From 0x78
to 0x3FF
From 0x000
to 0x387
相关PDF资料 |
PDF描述 |
|---|---|
| AD5292BRUZ-20 | IC POT DIG 1024P SPI 20K 14TSSOP |
| V375A36C600BL | CONVERTER MOD DC/DC 36V 600W |
| VI-BNL-MX-B1 | CONVERTER MOD DC/DC 28V 75W |
| AD7376ARWZ50 | IC DIGITAL POT 50K 16-SOIC |
| VI-BNJ-MX-B1 | CONVERTER MOD DC/DC 36V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5292BRUZ-100-RL7 | 功能描述:IC DGTL POT 1024POS 20K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5292BRUZ-20 | 功能描述:IC POT DIG 1024P SPI 20K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
| AD5292BRUZ-20-RL7 | 功能描述:IC POT DIG 1024P SPI 20K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5292BRUZ-50 | 功能描述:IC DGTL POT 1024POS 20K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
| AD5292BRUZ-50-RL7 | 功能描述:IC DGTL POT 1024POS 20K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。