- 您现在的位置：买卖IC网 > PDF目录10792 > AD5310BRMZ-REEL (Analog Devices Inc)IC DAC 10BIT R-R W/BUFF 8-MSOP PDF资料下载
参数资料
| 型号： | AD5310BRMZ-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 5/16页 |
| 文件大小： | 0K |
| 描述： | IC DAC 10BIT R-R W/BUFF 8-MSOP |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 产品变化通告： | Product Discontinuance 27/Oct/2011 |
| 标准包装： | 3,000 |
| 设置时间： | 6µs |
| 位数： | 10 |
| 数据接口： | 串行 |
| 转换器数目： | 1 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 1.25mW |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 1 电压，单极；1 电压，双极 |
| 采样率（每秒）： | 167k |
Data Sheet
AD5310
Rev. B | Page 13 of 16
AD5310 to 68HC11/68L11 Interface
Figure 29 shows a serial interface between the AD5310 and the
68HC11/68L11 microcontroller. SCK of the 68HC11/68L11
drives the SCLK of the AD5310, while the MOSI output drives
the serial data line of the DAC. The SYNC signal is derived
from a port line (PC7). The setup conditions for correct
operation of this interface are as follows: the 68HC11/68L11
should be configured so that its CPOL bit is a 0 and its CPHA
bit is a 1. When data is being transmitted to the DAC, the SYNC
line is taken low (PC7). With this 68HC11/68L11 configuration,
data appearing on the MOSI output is valid on the falling edge
of SCK. Serial data from the 68HC11/68L11 is transmitted in
8-bit bytes with only eight falling clock edges occurring in the
transmit cycle. Data is transmitted MSB first. To load data to the
AD5310, PC7 is left low after the first eight bits are transferred,
a second serial write operation is performed to the DAC, and
PC7 is taken high at the end of this procedure.
Figure 29. AD5310 to 68HC11/68L11 Interface
AD5310 to 80C51/80L51 Interface
Figure 30 shows a serial interface between the AD5310 and the
80C51/80L51 microcontroller. The setup for the interface is as
follows: TXD of the 80C51/80L51 drives SCLK of the AD5310
while RXD drives the serial data line of the part. The SYNC
signal is again derived from a bit-programmable pin on the
port. In this case, Port Line P3.3 is used. When data is to be
transmitted to the AD5310, P3.3 is taken low. The 80C51/80L51
transmits data only in 8-bit bytes; therefore, only eight falling
clock edges occur in the transmit cycle. To load data to the
DAC, P3.3 is left low after the first eight bits are transmitted,
and a second write cycle is initiated to transmit the second byte
of data. P3.3 is taken high following the completion of this
cycle. The 80C51/ 80L51 outputs the serial data in a format that
has the LSB first. The AD5310 requires that the MSB of data be
received first. The 80C51/80L51 transmit routine should take
this into account.
Figure 30. AD5310 to 80C51/80L51 Interface
AD5310 to MICROWIRE Interface
Figure 31 shows an interface between the AD5310 and any
MICROWIRE-compatible device. Serial data is shifted out
on the falling edge of the serial clock and is clocked into the
AD5310 on the rising edge of the SK.
Figure 31. AD5310 to MICROWIRE Interface
相关PDF资料 |
PDF描述 |
|---|---|
| VI-210-IW-S | CONVERTER MOD DC/DC 5V 100W |
| AD5336BRUZ-REEL | IC DAC 10BIT QUAD VOUT 28-TSSOP |
| VI-BN2-MX-F4 | CONVERTER MOD DC/DC 15V 75W |
| VE-B1Z-IU-S | CONVERTER MOD DC/DC 2V 80W |
| VI-BN2-MX-F3 | CONVERTER MOD DC/DC 15V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5310BRMZ-REEL7 | 功能描述:IC DAC 10BIT R-R W/BUFF 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 设计资源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 标准包装:10,000 系列:- 设置时间:- 位数:12 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 薄型，TSOT-23-8 供应商设备封装:TSOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:2.7M |
| AD5310BRT | 制造商:Analog Devices 功能描述: |
| AD5310BRT-500RL7 | 功能描述:IC DAC 10BIT R-R W/BUFF SOT23-6 RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 设计资源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 标准包装:10,000 系列:- 设置时间:- 位数:12 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 薄型，TSOT-23-8 供应商设备封装:TSOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:2.7M |
| AD5310BRT-R2 | 功能描述:INTEGRATED CIRCUIT 制造商:analog devices inc. 系列:* 包装:带卷（TR） 零件状态:最後搶購 封装/外壳:SOT-23-6 供应商器件封装:SOT-23-6 标准包装:1 |
| AD5310BRT-REEL | 功能描述:IC DAC 10BIT R-R W/BUFF SOT23-6 RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 设置时间:4µs 位数:12 数据接口:串行 转换器数目:2 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-uMAX 包装:管件 输出数目和类型:2 电压，单极 采样率（每秒）:* 产品目录页面:1398 (CN2011-ZH PDF) |
发布紧急采购，3分钟左右您将得到回复。