参数资料
型号: AD584KH
厂商: Analog Devices Inc
文件页数: 8/12页
文件大小: 0K
描述: IC VREF SERIES PREC ADJ TO-99-8
标准包装: 1
基准类型: 串联,可调节,精度
输出电压: 2.5V,5V,7.5V,10V
容差: ±10%
温度系数: 15ppm/°C
输入电压: 4.5 V ~ 30 V
通道数: 1
电流 - 静态: 1mA
电流 - 输出: 10mA
工作温度: 0°C ~ 70°C
安装类型: 通孔
封装/外壳: TO-99-8 金属罐
供应商设备封装: TO-99-8
包装: 散装
AD584
NOISE FILTERING
The bandwidth of the output amplifier in the AD584 can be
reduced to filter output noise. A capacitor ranging between 0.01 μF
and 0.1 μF connected between the CAP and V BG terminals further
reduces the wideband and feedthrough noise in the output of
the AD584 , as shown in Figure 9 and Figure 10. However, this
tends to increase the turn-on settling time of the device; therefore,
allow for ample warm-up time.
SUPPLY
Data Sheet
USING THE STROBE TERMINAL
The AD584 has a strobe input that can be used to zero the output.
This unique feature permits a variety of new applications in
signal and power conditioning circuits.
Figure 11 illustrates the strobe connection. A simple NPN switch
can be used to translate a TTL logic signal into a strobe of the
output. The AD584 operates normally when there is no current
drawn from Pin 5. Bringing this terminal low, to less than 200 mV,
allows the output voltage to go to zero. In this mode, the AD584
0.01μF*
TO
0.1μF
CAP
V BG
7
6
V+
8
AD584
1
10.0V
is not required to source or sink current (unless a 0.7 V residual
output is permissible). If the AD584 is required to sink a transient
current while strobe is off, limit the strobe terminal input current
by a 100 Ω resistor, as shown in Figure 11.
4
8
V+
COMMON
*INCREASES TURN-ON TIME
100?
STROBE
5
AD584
1
2
10.0V
Figure 9. Additional Noise Filtering with an External Capacitor
3
2N2222
10k?
1000
NOISE SPECTRAL DENSITY (nV/ Hz)
100pF
NO CAP
LOGIC
INPUT
HI = OFF 20k?
4
LO = ON
COMMON
Figure 11. Use of the Strobe Terminal
100
10
1000pF
0.01μF
NO CAP
TOTAL NOISE (μV rms) UP TO
SPECIFIED FREQUENCY
The strobe terminal tolerates up to 5 μA leakage, and its driver
should be capable of sinking 500 μA continuous. A low leakage,
open collector gate can be used to drive the strobe terminal directly,
provided the gate can withstand the AD584 output voltage plus 1 V.
PERCISION HIGH CURRENT SUPPLY
The AD584 can be easily connected to a power PNP or power
PNP Darlington device to provide much greater output current
1
10 100 1k 10k 100k 1M
FREQUENCY (Hz)
Figure 10. Spectral Noise Density and Total RMS Noise vs. Frequency
capability. The circuit shown in Figure 12 delivers a precision
10 V output with up to 4 A supplied to the load. If the load has a
significant capacitive component, the 0.1 μF capacitor is required.
If the load is purely resistive, improved high frequency, supply
rejection results from removing the capacitor.
V IN ≥ 15V
470?
2N6040
8
V+
0.1μF
AD584
1
10.0V
V OUT
10V @ 4A
4
COMMON
Figure 12. High Current Precision Supply
Rev. C | Page 8 of 12
相关PDF资料
PDF描述
LGW2W121MELZ35 CAP ALUM 120UF 450V 20% SNAP
234A011-100-0 BOOT MOLDED
VE-B1Y-EX CONVERTER MOD DC/DC 3.3V 49.5W
VI-J7R-EY CONVERTER MOD DC/DC 7.5V 50W
VE-2V0-EY CONVERTER MOD DC/DC 5V 50W
相关代理商/技术参数
参数描述
AD584KH/+ 制造商:Analog Devices 功能描述:V-Ref Programmable 2.5V/5V/7.5V/10V 10mA 8-Pin TO-99 制造商:Rochester Electronics LLC 功能描述:- Bulk
AD584KN 制造商:Analog Devices 功能描述:V-Ref Programmable 2.5V/5V/7.5V/10V 10mA 8-Pin PDIP N Tube 制造商:Rochester Electronics LLC 功能描述:IC - PROGRAMMABLE V REF. - Bulk 制造商:Analog Devices 功能描述:Voltage Regulator IC Package/Case:8-PDIP
AD584KNZ 功能描述:IC VREF SERIES PREC ADJ 8-PDIP RoHS:是 类别:集成电路 (IC) >> PMIC - 电压基准 系列:- 标准包装:3,000 系列:- 基准类型:旁路,精度 输出电压:3V 容差:±0.5% 温度系数:100ppm/°C 输入电压:- 通道数:1 电流 - 阴极:82µA 电流 - 静态:- 电流 - 输出:15mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-TSSOP(5 引线),SC-88A,SOT-353 供应商设备封装:SC-70-5 包装:带卷 (TR) 其它名称:296-20888-2
AD584KNZ 制造商:Analog Devices 功能描述:IC - PROGRAMMABLE V REF. ((NW))
AD584L 制造商:AD 制造商全称:Analog Devices 功能描述:Pin Programmable Precision Voltage Reference