- 您现在的位置：买卖IC网 > PDF目录22188 > AD636JDZ (Analog Devices Inc)IC TRUE RMS/DC CONV MONO 14-CDIP PDF资料下载
参数资料
| 型号： | AD636JDZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/17页 |
| 文件大小： | 670K |
| 描述： | IC TRUE RMS/DC CONV MONO 14-CDIP |
| 产品培训模块： | Introduction to Analog RMS-to-DC Technology: Converters and Applications |
| 标准包装： | 25 |
| 电流 - 电源： | 800µA |
| 电源电压： | ±2.5 V ~ 16 V |
| 安装类型： | 通孔 |
| 封装/外壳： | 14-CDIP（0.300"，7.62mm） |
| 供应商设备封装： | 14-CDIP |
| 包装： | 管件 |
| 产品目录页面： | 786 (CN2011-ZH PDF) |
Data Sheet
AD636
Rev. E | Page 9 of 16
Figure 4 shows the value of REXTERNAL for a particular ratio of
VPEAK to VS for several values of RLOAD. The addition of
REXTERNAL increases the quiescent current of the buffer amplifier
by an amount equal to R
EXT
/V
S
. Nominal buffer quiescent
current with no R
EXTERNAL
is 30 礎 at V
S
= 5 V.
FREQUENCY RESPONSE
The AD636 uses a logarithmic circuit to perform the implicit rms
computation. As with any log circuit, bandwidth is proportional to
signal level. The solid lines in Figure 5 represent the frequency
response of the AD636 at input levels from 1 mV to 1 V rms.
The dashed lines indicate the upper frequency limits for 1%,
10%, and ? dB of reading additional error. For example, note
that a 1 V rms signal produces less than 1% of reading additional
error up to 220 kHz. A 10 mV signal can be measured with 1%
of reading additional error (100 礦) up to 14 kHz.
AC MEASUREMENT ACCURACY AND CREST
FACTOR (CF)
Crest factor is often overlooked in determining the accuracy of
an ac measurement. Crest factor is defined as the ratio of the
peak signal amplitude to the rms value of the signal (CF = V
P
/V
rms). Most common waveforms, such as sine and triangle
waves, have relatively low crest factors (<2). Waveforms that
resemble low duty cycle pulse trains, such as those occurring in
switching power supplies and SCR circuits, have high crest
factors. For example, a rectangular pulse train with a 1% duty
cycle has a crest factor of 10 (CF = 1/
?/DIV>
).
Figure 6 is a curve of reading error for the AD636 for a
200 mV rms input signal with crest factors from 1 to 7. A
rectangular pulse train (pulse width 200 約) was used for this
test because it is the worst-case waveform for rms measurement
(all the energy is contained in the peaks). The duty cycle and
peak amplitude were varied to produce crest factors from 1 to 7
while maintaining a constant 200 mV rms input amplitude.
相关PDF资料 |
PDF描述 |
|---|---|
| UG2004-T | DIODE ULT FAST 2A 400V DO-15 |
| VI-J0J-IZ | CONVERTER MOD DC/DC 36V 25W |
| 356-036-506-101 | CARDEDGE 36POS .156 BLACK |
| TAJB225M016RNJ | CAP TANT 2.2UF 16V 20% 1210 |
| 592D685X9035R4T15H | CAP TANT 6.8UF 35V 10% 2824 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD636JDZ | 制造商:Analog Devices 功能描述:IC, RMS-DC CONVERTER, 1%, 1.5MHZ, DIP-14 |
| AD636JH | 功能描述:其他电源管理 RMS/DC CONVERTER IC RoHS:否 制造商:Texas Instruments 输出电压范围: 输出电流:4 mA 输入电压范围:3 V to 3.6 V 输入电流: 功率耗散: 工作温度范围:- 40 C to + 110 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-48 封装:Reel |
| AD636JHZ | 功能描述:IC CONV RMS-DC LOW LVL TO100-10 RoHS:是 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD636JHZ | 制造商:Analog Devices 功能描述:IC, RMS-DC CONV, 1%, 1.5MHZ, TO-100-10 |
| AD636JN | 制造商:未知厂家 制造商全称:未知厂家 功能描述:RMS-to-DC Converter |
发布紧急采购，3分钟左右您将得到回复。