- 您现在的位置：买卖IC网 > PDF目录22188 > AD637ARZ (Analog Devices Inc)IC RMS/DC CONV PRECISION 16-SOIC PDF资料下载
参数资料
| 型号： | AD637ARZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 1/21页 |
| 文件大小： | 0K |
| 描述： | IC RMS/DC CONV PRECISION 16-SOIC |
| 产品培训模块： | Introduction to Analog RMS-to-DC Technology: Converters and Applications |
| 标准包装： | 1 |
| 电流 - 电源： | 2.2mA |
| 电源电压： | ±3 V ~ 18 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 管件 |
| 产品目录页面： | 786 (CN2011-ZH PDF) |
| 配用： | AD637-EVALZ-ND - BOARD EVALUATION FOR AD637 |
High Precision, Wideband
RMS-to-DC Converter
AD637
FEATURES
High accuracy
FUNCTIONAL BLOCK DIAGRAM
0.02% maximum nonlinearity, 0 V to 2 V rms input
0.10% additional error to crest factor of 3
BUFF IN
BUFF
OUT
Wide bandwidth
8 MHz at 2 V rms input
600 kHz at 100 mV rms
V IN
ABSOLUTE
VALUE
SQUARER/
DIVIDER
25k ?
RMS OUT
Computes
True rms
Square
Mean square
Absolute value
dB output (60 dB range)
Chip select/power-down feature allows
Analog three-state operation
Quiescent current reduction from 2.2 mA to 350 μA
14-lead SBDIP, 14-lead low cost CERDIP, and 16-lead SOIC_W
DEN INPUT
OUTPUT
OFFSET
COMMON
CS
25k ?
BIAS
Figure 1.
AD637
C AV
dB OUTPUT
GENERAL DESCRIPTION
The AD637 is a complete, high accuracy, monolithic rms-to-dc
converter that computes the true rms value of any complex
waveform. It offers performance that is unprecedented in
integrated circuit rms-to-dc converters and comparable to
discrete and modular techniques in accuracy, bandwidth, and
dynamic range. A crest factor compensation scheme in the
AD637 permits measurements of signals with crest factors of
up to 10 with less than 1% additional error. The wide band-
width of the AD637 permits the measurement of signals up to
600 kHz with inputs of 200 mV rms and up to 8 MHz when the
input levels are above 1 V rms.
As with previous monolithic rms converters from Analog
Devices, Inc., the AD637 has an auxiliary dB output available to
users. The logarithm of the rms output signal is brought out to a
separate pin, allowing direct dB measurement with a useful
range of 60 dB. An externally programmed reference current
allows the user to select the 0 dB reference voltage to correspond to
any level between 0.1 V and 2.0 V rms.
A chip select connection on the AD637 permits the user to
decrease the supply current from 2.2 mA to 350 μA during periods
when the rms function is not in use. This feature facilitates the
addition of precision rms measurement to remote or handheld
applications where minimum power consumption is critical. In
addition, when the AD637 is powered down, the output goes to a
high impedance state. This allows several AD637s to be tied
together to form a wideband true rms multiplexer.
Rev. K
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
The input circuitry of the AD637 is protected from overload
voltages in excess of the supply levels. The inputs are not
damaged by input signals if the supply voltages are lost.
The AD637 is available in accuracy Grade J and Grade K for
commercial temperature range (0°C to 70°C) applications, accuracy
Grade A and Grade B for industrial range (?40°C to +85°C) appli-
cations, and accuracy Grade S rated over the ?55°C to +125°C
temperature range. All versions are available in hermetically sealed,
14-lead SBDIP, 14-lead CERDIP, and 16-lead SOIC_W packages.
The AD637 computes the true root mean square, mean square,
or absolute value of any complex ac (or ac plus dc) input
waveform and gives an equivalent dc output voltage. The true
rms value of a waveform is more useful than an average
rectified signal because it relates directly to the power of the
signal. The rms value of a statistical signal is also related to the
standard deviation of the signal.
The AD637 is laser wafer trimmed to achieve rated performance
without external trimming. The only external component
required is a capacitor that sets the averaging time period. The
value of this capacitor also determines low frequency accuracy,
ripple level, and settling time.
The on-chip buffer amplifier can be used either as an input
buffer or in an active filter configuration. The filter can be used
to reduce the amount of ac ripple, thereby increasing accuracy.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ?2011 Analog Devices, Inc. All rights reserved.
相关PDF资料 |
PDF描述 |
|---|---|
| AD536AJDZ | IC TRUE RMS/DC CONV 14-CDIP |
| WSU120-0700 | POWER SUPPLY 100-240V 700MA |
| RAC15-0515TA-E | CONV AC/DC 2A 6.5-18VIN 3.0-5.5V |
| AD636JDZ | IC TRUE RMS/DC CONV MONO 14-CDIP |
| UG2004-T | DIODE ULT FAST 2A 400V DO-15 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD637B | 制造商:AD 制造商全称:Analog Devices 功能描述:High Precision, Wide-Band RMS-to-DC Converter |
| AD637BQ | 功能描述:IC RMS/DC CONV PRECISION 14-CDIP RoHS:否 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD637BR | 功能描述:IC RMS/DC CONV PRECISION 16-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD637BRZ | 功能描述:IC RMS/DC CONV PRECISION 16-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD637BRZ | 制造商:Analog Devices 功能描述:RMS-DC CONVERTER PRECISION 16SOIC 制造商:Analog Devices 功能描述:RMS-DC CONVERTER, PRECISION, 16SOIC |
发布紧急采购，3分钟左右您将得到回复。