- 您现在的位置：买卖IC网 > PDF目录20640 > AD71056ARZ (Analog Devices Inc)IC ENERGY METERING 1PHASE 16SOIC PDF资料下载
参数资料
| 型号： | AD71056ARZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/20页 |
| 文件大小： | 0K |
| 描述： | IC ENERGY METERING 1PHASE 16SOIC |
| 标准包装： | 48 |
| 输入阻抗： | 320 千欧 |
| 测量误差： | 0.1% |
| 电压 - 高输入/输出： | 2.4V |
| 电压 - 低输入/输出： | 0.8V |
| 电流 - 电源： | 5mA |
| 电源电压： | 4.75 V ~ 5.25 V |
| 测量仪表类型： | 单相 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SOIC |
| 包装： | 管件 |
| 产品目录页面： | 797 (CN2011-ZH PDF) |
AD71056
to active power. The CF output frequencies are given in Table 7.
As with F1 and F2, if the period of CF (t 5 ) falls below 180 ms,
the CF pulse width is set to half the period. If the CF frequency,
for example, is 20 Hz, the CF pulse width is 25 ms.
When the high frequency mode is selected (that is, SCF = 0,
S1 = S0 = 1), the CF pulse width is fixed at 35 μs. Therefore, t 4
is always 35 μs, regardless of the output frequency on CF.
NO LOAD THRESHOLD
The AD71056 also includes a no load threshold and start-up
current feature that eliminates any creep effects in the meter.
The AD71056 is designed to issue a minimum output
frequency. Any load generating a frequency lower than this
minimum frequency does not cause a pulse to be issued on F1,
F2, or CF. The minimum output frequency is given as 0.00244%
output frequency at F1 or F2 equals 0.00244% of 3.43 Hz or
8.38 × 10 –5 Hz. This is 2.68 × 10 –3 Hz at CF (32 × F1 Hz) when
SCF = S0 = 1, S1 = 0. In this example, the no load threshold is
equivalent to 3 W of load or a start-up current of 13.72 mA at
220 V. Compare this value to the IEC62053-21 specification that
states the meter must start up with a load equal to or less than
0.4% Ib. For a 5 A (Ib) meter, 0.4% of Ib is equivalent to 20 mA.
NEGATIVE POWER INFORMATION
The AD71056 detects when the current and voltage channels
have a phase shift greater than 90°. This mechanism can detect
wrong connection of the meter or generation of negative power.
The REVP pin output goes active high when negative power is
detected and active low when positive power is detected. The
REVP pin output changes state as a pulse is issued on CF.
for each of the f 1…4 frequency selections (see Table 5).
For example, for an energy meter with a meter constant of
100 imp/kWh on F1, F2 using f 3 (3.43 Hz), the minimum
Rev. A | Page 17 of 20
相关PDF资料 |
PDF描述 |
|---|---|
| ADE7768ARZ | IC ENERGY METERING 1PHASE 16SOIC |
| AMM25DSXH | CONN EDGECARD 50POS DIP .156 SLD |
| LQW18AN6N8D00D | INDUCTOR 6.8NH 750MA 0603 |
| RS2AA-13 | RECT FAST RECOVERY 50V 1.5A SMA |
| ABB66DHHT-S578 | EDGECARD 132POS .050 SLD W/POSTS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD71056ARZ | 制造商:Analog Devices 功能描述:IC ENERGY METERING IC 7KHZ SOIC-16 制造商:Analog Devices 功能描述:IC, ENERGY METERING IC, 7KHZ, SOIC-16 |
| AD71056ARZ-RL | 功能描述:IC ENERGY METERING 1PHASE 16SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
| AD71057ARS | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD71057ARSRL | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD71057ARSZ | 制造商:Analog Devices 功能描述: |
发布紧急采购，3分钟左右您将得到回复。