- 您现在的位置：买卖IC网 > PDF目录373897 > AD736JR (ANALOG DEVICES INC) Low Cost, Low Power, True RMS-to-DC Converter PDF资料下载
参数资料
| 型号： | AD736JR |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 模拟专用变换器 |
| 英文描述： | Low Cost, Low Power, True RMS-to-DC Converter |
| 中文描述： | RMS TO DC CONVERTER, 0.005 MHz, PDSO8 |
| 封装： | MS-012AA, SOIC-8 |
| 文件页数： | 6/8页 |
| 文件大小： | 218K |
| 代理商： | AD736JR |
AD736
T Y PE S OF AC ME ASURE ME NT
T he AD736 is capable of measuring ac signals by operating as
either an average responding or a true rms-to-dc converter. As
its name implies, an average responding converter computes the
average absolute value of an ac (or ac and dc) voltage or current
by full wave rectifying and low-pass filtering the input signal;
this will approximate the average. T he resulting output, a dc
“average” level, is then scaled by adding (or reducing) gain; this
scale factor converts the dc average reading to an rms equivalent
value for the waveform being measured. For example, the aver-
age absolute value of a sine-wave voltage is 0.636 that of V
PEAK
;
the corresponding rms value is 0.707 times V
PEAK
. T herefore,
for sine-wave voltages, the required scale factor is 1.11 (0.707
divided by 0.636).
In contrast to measuring the “average” value, true rms measure-
ment is a “universal language” among waveforms, allowing the
magnitudes of all types of voltage (or current) waveforms to be
compared to one another and to dc. RMS is a direct measure of
the power or heating value of an ac voltage compared to that of
dc: an ac signal of 1 volt rms will produce the same amount of
heat in a resistor as a 1 volt dc signal.
Mathematically, the rms value of a voltage is defined (using a
simplified equation) as:
REV. C
–6–
T able I. E rror Introduced by an Average Responding Circuit When Measuring Common Waveforms
Waveform T ype
1 Volt Peak
Amplitude
Crest Factor
(V
PE AK
/V rms)
T rue rms Value
Average Responding
Circuit Calibrated to
Read rms Value of
Sine Waves Will Read
0.707 V
% of Reading E rror*
Using Average
Responding Circuit
Undistorted
Sine Wave
Symmetrical
Square Wave
Undistorted
T riangle Wave
Gaussian
Noise (98% of
Peaks <1 V)
Rectangular
Pulse T rain
SCR Waveforms
50% Duty Cycle
25% Duty Cycle
1.414
0.707 V
0%
1.00
1.00 V
1.11 V
+11.0%
1.73
0.577 V
0.555 V
–3.8%
3
2
10
0.333 V
0.5 V
0.1 V
0.295 V
0.278 V
0.011 V
–11.4%
–44%
–89%
2
4.7
0.495 V
0.212 V
0.354 V
0.150 V
–28%
–30%
*%
of ReadingError
=
AverageRespondingValue
±
TruermsValue
TruermsValue
×
100%
V rms
=
Avg
.(
V
2
)
T his involves squaring the signal, taking the average, and then
obtaining the square root. T rue rms converters are “smart recti-
fiers”: they provide an accurate rms reading regardless of the
type of waveform being measured. However, average responding
converters can exhibit very high errors when their input signals
deviate from their precalibrated waveform; the magnitude of the
error will depend upon the type of waveform being measured.
As an example, if an average responding converter is calibrated
to measure the rms value of sine-wave voltages, and then is used
to measure either symmetrical square waves or dc voltages, the
converter will have a computational error 11% (of reading)
higher than the true rms value (see T able I).
AD736 T HE ORY OF OPE RAT ION
As shown by Figure 16, the AD736 has five functional subsec-
tions: input amplifier, full-wave rectifier, rms core, output am-
plifier and bias sections. T he FET input amplifier allows
both a high impedance, buffered input (Pin 2) or a low imped-
ance, wide-dynamic-range input (Pin 1). T he high impedance
input, with its low input bias current, is well suited for use with
high impedance input attenuators.
T he output of the input amplifier drives a full wave precision
rectifier, which in turn, drives the rms core. It is in the core that
the essential rms operations of squaring, averaging and square
rooting are performed, using an external averaging capacitor,
C
AV
. Without C
AV
, the rectified input signal travels through the
core unprocessed, as is done with the average responding con-
nection (Figure 17).
A final subsection, an output amplifier, buffers the output from
the core and also allows optional low-pass filtering to be per-
formed via external capacitor, C
F
, connected across the feed-
back path of the amplifier. In the average responding
connection, this is where all of the averaging is carried out. In
the rms circuit, this additional filtering stage helps reduce any
output ripple which was not removed by the averaging capaci-
tor, C
AV
.
Figure 16. AD736 True RMS Circuit
相关PDF资料 |
PDF描述 |
|---|---|
| AD736JR-REEL-7 | Low Cost, Low Power, True RMS-to-DC Converter |
| AD736KR-REEL-7 | Low Cost, Low Power, True RMS-to-DC Converter |
| AD736 | Low Cost, Low Power, True RMS-to-DC Converter |
| AD736AQ | Low Cost, Low Power, True RMS-to-DC Converter |
| AD736BQ | Low Cost, Low Power, True RMS-to-DC Converter |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD736JR-REEL | 功能描述:IC AC RMS TO DC CONV 5V 8-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD736JR-REEL7 | 功能描述:IC AC RMS TO DC CONV 5V 8-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD736JR-REEL-7 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power, True RMS-to-DC Converter |
| AD736JRZ | 功能描述:IC TRUE RMS/DC CONV LP 8-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| AD736JRZ-R7 | 功能描述:IC TRUE RMS/DC CONV LP 8-SOIC TR RoHS:是 类别:集成电路 (IC) >> PMIC - RMS 至 DC 转换器 系列:- 标准包装:46 系列:- 电流 - 电源:1.2mA 电源电压:±18 V，36 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。