参数资料
型号: AD7399BRUZ
厂商: Analog Devices Inc
文件页数: 9/24页
文件大小: 0K
描述: IC DAC 10BIT QUAD SRL 16-TSSOP
产品培训模块: Data Converter Fundamentals
DAC Architectures
标准包装: 96
设置时间: 6µs
位数: 10
数据接口: 串行,SPI?
转换器数目: 4
电压电源: 双 ±
功率耗散(最大): 16mW
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 16-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 16-TSSOP
包装: 管件
输出数目和类型: 4 电压,单极
采样率(每秒): 167k
产品目录页面: 784 (CN2011-ZH PDF)
AD7398/AD7399
Rev. C | Page 17 of 24
Note that the 80C51/80L51 provide the LSB first, although the
AD7398/AD7399 expect the MSB of the 16-bit/14-bit word
first. Care should be taken to ensure the transmit routine takes
this into account. This can usually be done with software by
shifting out and accumulating the bits in the correct order
before inputting to the DAC. In addition, 80C51 outputs two
byte words/16 bits of data. Thus for AD7399, the first two bits,
after rearrangement, should be don’t care as they are dropped
from the 14-bit word of the AD7399.
When data is to be transmitted to the DAC, P3.3 is taken low.
Data on RxD is valid on the falling edge of TxD, so the clock
must be inverted as the DAC clocks data into the input shift
register on the rising edge of the serial clock. The 80C51/80L51
transmit their data in 8-bit bytes with only eight falling clock
edges occurring in the transmit cycle. As the AD7399 requires a
14-bit word, P3.3 (or any one of the other programmable bits) is the
CS input signal to the DAC; therefore P3.3 should be brought low
at the beginning of the 16-bit write cycle 2 × 8 bit-words, and held
low until the 16-bit 2 × 8 cycle is completed. After that, P3.3 is
brought high again and the new data loads to the DAC. Again, the
first two bits, after rearranging, should be don’t care. LDAC on the
AD7398/AD7399 can also be controlled by the 80C51/80L51 serial
port output by using another bit-programmable pin, P3.4.
相关PDF资料
PDF描述
MS3450W28-15SW CONN RCPT 35POS WALL MNT W/SCKT
MS3450W28-15S CONN RCPT 35POS WALL MNT W/SCKT
LTC1451IS8#PBF IC D/A CONV 12BIT R-R 8-SOIC
MS3450L28-15SZ CONN RCPT 35POS WALL MNT W/SCKT
MS3450L28-15SY CONN RCPT 35POS WALL MNT W/SCKT
相关代理商/技术参数
参数描述
AD7399BRUZ-REEL7 功能描述:IC DAC 10BIT QUAD SRL 16-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散(最大):55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP(0.209",5.30mm 宽) 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流,单极;1 电流,双极 采样率(每秒):*
AD7399BRZ 功能描述:IC DAC 10BIT QUAD SRL 16-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:1 系列:- 设置时间:4.5µs 位数:12 数据接口:串行,SPI? 转换器数目:1 电压电源:单电源 功率耗散(最大):- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽) 供应商设备封装:8-SOICN 包装:剪切带 (CT) 输出数目和类型:1 电压,单极;1 电压,双极 采样率(每秒):* 其它名称:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND
AD7399BRZ-REEL 功能描述:IC DAC 10BIT QUAD SRL 16-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散(最大):55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP(0.209",5.30mm 宽) 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流,单极;1 电流,双极 采样率(每秒):*
AD-740 制造商:Alarm Suppliers 功能描述:
AD7400 制造商:AD 制造商全称:Analog Devices 功能描述:Isolated Sigma-Delta Modulator