- 您现在的位置：买卖IC网 > PDF目录5718 > AD743JR-16-REEL7 (Analog Devices Inc)IC OPAMP BIFET 4.5MHZ LN 16SOIC PDF资料下载
参数资料
| 型号： | AD743JR-16-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP BIFET 4.5MHZ LN 16SOIC |
| 标准包装： | 400 |
| 放大器类型： | J-FET |
| 电路数： | 1 |
| 转换速率： | 2.8 V/µs |
| -3db带宽： | 4.5MHz |
| 电流 - 输入偏压： | 250pA |
| 电压 - 输入偏移： | 250µV |
| 电流 - 电源： | 8.1mA |
| 电流 - 输出 / 通道： | 40mA |
| 电压 - 电源，单路/双路(±)： | 9.6 V ~ 36 V，±4.8 V ~ 18 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 带卷 (TR) |
REV. E
–8–
AD743
Figures 4 and 5 show two ways to buffer and amplify the output of
a charge output transducer. Both require using an amplifier that
has a very high input impedance, such as the AD743. Figure 4
shows a model of a charge amplifier circuit. Here, amplifica-
tion depends on the principle of conservation of charge at the
input of amplifier A1, which requires that the charge on capaci-
tor CS be transferred to capacitor CF, thus yielding an output
voltage of
Q/C
F. The amplifier’s input voltage noise will appear at
the output amplified by the noise gain (1 + (CS/CF)) of the circuit.
A1
*OPTIONAL, SEE TEXT
CS
CF
CB*
RB*
R1
=
CS
CF
R1
R2
RB*
Figure 4. Charge Amplifier Circuit
A2
*OPTIONAL, SEE TEXT
CS
CB*
RB*
R1
R2
RB
Figure 5. Model for a High Z Follower with Gain
The circuit in Figure 5 is simply a high impedance follower with
gain. Here the noise gain (1 + (R1/R2)) is the same as the gain
from the transducer to the output. In both circuits, resistor RB is
required as a dc bias current return.
There are three important sources of noise in these circuits.
Amplifiers A1 and A2 contribute both voltage and current noise,
while resistor RB contributes a current noise of
Nk
T
R
f
B
= 4
where
k = Boltzman’s Constant = 1.381
× 10–23 joules/kelvin
T = Absolute Temperature, kelvin (0
°C = 273.2 kelvin)
f = Bandwidth—in Hz (assuming an ideal “brick wall” filter)
This must be root-sum-squared with the amplifier’s own
current noise.
Figure 6 shows that these circuits in Figures 4 and 5 have an
identical frequency response and noise performance (provided
that CS/CF = R1/ R2). One feature of the first circuit is that a “T”
network is used to increase the effective resistance of RB and to
improve the low frequency cutoff point by the same factor.
–100
–110
–120
–130
–140
–150
–160
–170
–180
–190
–200
–210
–220
0.01
0.1
110
100
1k
10k
100k
FREQUENCY (Hz)
DECIBELS
REFERENCED
TO
1V
/
Hz
TOTAL
OUTPUT
NOISE
DUE TO
RB ALONE
NOISE
DUE TO
IB ALONE
Figure 6. Noise at the Outputs of the Circuits of
Figures 4 and 5. Gain = +10, CS = 3000 pF, RB = 22 M
However, this does not change the noise contribution of RB which,
in this example, dominates at low frequencies. The graph of
Figure 7 shows how to select an RB large enough to minimize
this resistor’s contribution to overall circuit noise. When the
equivalent current noise of RB ((
√4kT)/R equals the noise of I
B
(
√2qIB), there is diminishing return in making R
B larger.
1pA
10pA
100pA
1nA
10nA
5.2
1010
5.2
109
5.2
107
5.2
106
5.2
108
INPUT BIAS CURRENT
RESISTANCE
(
)
Figure 7. Graph of Resistance vs. Input Bias Current
Where the Equivalent Noise
√4kT/R, Equals the Noise
of the Bias Current
√2qIB
To maximize dc performance over temperature, the source
resistances should be balanced on each input of the amplifier.
This is represented by the optional resistor RB in Figures 4 and 5.
As previously mentioned, for best noise performance, care should
be taken to also balance the source capacitance designated by CB.
The value for CB in Figure 4 would be equal to CS in Figure 5.
At values of CB over 300 pF, there is a diminishing impact on
noise; capacitor CB can then be simply a large bypass of 0.01
F
or greater.
相关PDF资料 |
PDF描述 |
|---|---|
| 0090.1010 | FUSE FAST 10A 250V MIDGET |
| 0090.1008 | FUSE FAST 8A 250V MIDGET |
| AD8224HBCPZ-R7 | IC AMP INST DUAL PREC LN 16LFCSP |
| 0090.1006 | FUSE FAST 6A 250V MIDGET |
| 0090.1005 | FUSE FAST 5A 250V MIDGET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD743JRZ-16 | 功能描述:IC OPAMP BIFET 4.5MHZ LN 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| AD743JRZ-16-REEL | 功能描述:IC OPAMP BIFET 4.5MHZ LN 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| AD743JRZ-16-REEL7 | 功能描述:IC OPAMP BIFET 4.5MHZ LN 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| AD743KN | 制造商:Rochester Electronics LLC 功能描述:LOW NOISE BIFET OP AMP IC - Bulk |
| AD743KQ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
发布紧急采购，3分钟左右您将得到回复。