参数资料
| 型号： | AD746SQ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP BIFET 13MHZ DUAL 8CDIP |
| 标准包装： | 1 |
| 放大器类型： | J-FET |
| 电路数： | 2 |
| 转换速率： | 75 V/µs |
| 增益带宽积： | 13MHz |
| -3db带宽： | 13MHz |
| 电流 - 输入偏压： | 110pA |
| 电压 - 输入偏移： | 300µV |
| 电流 - 电源： | 7mA |
| 电流 - 输出 / 通道： | 25mA |
| 电压 - 电源，单路/双路(±)： | 9 V ~ 36 V，±4.5 V ~ 18 V |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-CDIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-CERDIP |
| 包装： | 管件 |
AD746
–6–
REV. B
POWER SUPPLY BYPASSING
The power supply connections to the AD746 must maintain a
low impedance to ground over a bandwidth of 13 MHz or more.
This is especially important when driving a significant resistive
or capacitive load, since all current delivered to the load comes
from the power supplies. Multiple high quality bypass capacitors
are recommended for each power supply line in any critical
application. A 0.1
F ceramic and a 1 F tantalum capacitor as
shown in Figure 20 placed as close as possible to the amplifier
(with short lead lengths to power supply common) will assure
adequate high frequency bypassing, in most applications. A
minimum bypass capacitance of 0.1
F should be used for any
application.
If only one of the two amplifiers inside the AD746 is to be
utilized, the unused amplifier should be connected as shown in
Figure 21a. Note that the noninverting input should be
grounded and that RL and CL are not required.
Figure 19. THD Test Circuit
Figure 22a. Unity Gain Inverter
Figure 21a. Gain of 2 Follower
Figure 21b. Gain of 2 Follower
Large Signal Pulse Response
Figure 21c. Gain of 2 Follower
Small Signal Pulse Response
Figure 22b. Unity Gain Inverter
Large Signal Pulse Response
Figure 22c. Unity Gain Inverter
Small Signal Pulse Response
Figure 20. Power Supply
Bypassing
相关PDF资料 |
PDF描述 |
|---|---|
| 961117-6300-AR-PR | CONN HEADER VERT 17POS GOLD SMD |
| TV02W700-HP | TVS 200W 70V UNIDIRECT SOD-123 |
| 60660-1 | CONN PIN 14-18AWG TIN CRIMP |
| 951232-7622-AR | CONN HEADER 32POS 2MM R/A SOLDER |
| 2036-42-C2F | GAS DISCHARGE TUBE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD746SQ/883B | 制造商:Analog Devices 功能描述:OP Amp Dual GP 制造商:Analog Devices 功能描述:OP AMP DUAL GP 18V 8CDIP - Rail/Tube 制造商:Analog Devices 功能描述:DUAL PREC BIFET OP AMP IC *NIC 制造商:Analog Devices Inc. 功能描述:Precision Amplifiers DUAL PREC BIFET OP AMP IC |
| AD746TH | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
| AD746TQ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
| AD7470 | 制造商:AD 制造商全称:Analog Devices 功能描述:1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs |
| AD7470_03 | 制造商:AD 制造商全称:Analog Devices 功能描述:1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs |
发布紧急采购，3分钟左右您将得到回复。