- 您现在的位置：买卖IC网 > PDF目录10660 > AD7701ARZ (Analog Devices Inc)IC ADC 16BIT LC2MOS 20-SOIC PDF资料下载
参数资料
| 型号： | AD7701ARZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 16/20页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT LC2MOS 20-SOIC |
| 标准包装： | 1 |
| 位数： | 16 |
| 采样率（每秒）： | 4k |
| 数据接口： | 串行 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 37mW |
| 电压电源： | 模拟和数字，双 ± |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 20-SOIC W |
| 包装： | 管件 |
| 输入数目和类型： | 1 个单端，单极；1 个单端，双极 |
REV. E
AD7701
–5–
PIN FUNCTION DESCRIPTIONS
Pin No.
PDIP,
CERDIP,
SOIC
SSOP
Mnemonic Description
11
MODE
Selects the Serial Interface Mode. If MODE is tied to –5 V, the AD7701 will operate in
the Asynchronous Communications (AC) mode. The SCLK pin is configured as an
input, and data is transmitted in two bytes, each with one start bit and two stop bits. If
MODE is tied to DGND, the Synchronous External Clocking (SEC) mode is selected.
SCLK is configured as an input, and the output appears without formatting, the MSB
coming first. If MODE is tied to +5 V, the AD7701 operates in the Synchronous
Self-Clocking (SSC) mode. SCLK is configured as an output, with a clock frequency of
fCLKlN/4 and 25% duty cycle.
22
CLKOUT
Clock Output to Generate an Internal Master Clock by Connecting a Crystal between
CLKOUT and CLKIN. If an external clock is used, CLKOUT is not connected.
33
CLKIN
Clock Input for External Clock.
4, 17
4, 25
SC1, SC2
System Calibration Pins. The state of these pins, when CAL is taken high, determines
the type of calibration performed.
55
DGND
Digital Ground. Ground reference for all digital signals.
68
DVSS
Digital Negative Supply, –5 V Nominal.
6, 7, 9, 11,
NC
No Connect.
18, 21, 22, 23
710
AVSS
Analog Negative Supply, –5 V Nominal.
812
AGND
Analog Ground. Ground reference for all analog signals.
913
AIN
Analog Input.
10
14
VREF
Voltage Reference Input, 2.5 V Nominal. This determines the value of positive full scale
in the Unipolar mode and of both positive and negative full scale in Bipolar mode.
11
15
SLEEP
Sleep Mode Pin. When this pin is taken low, the AD7701 goes into a low power mode
with typically 10
W power consumption.
12
16
BP/
UP
Bipolar/Unipolar Mode Pin. When this pin is low, the AD7701 is configured for a uni-
polar input range going from AGND to VREF. When Pin 12 is high, the AD7701 is
configured for a bipolar input range,
±VREF.
13
17
CAL
Calibration Mode Pin. When CAL is taken high for more than four cycles, the AD7701
is reset and performs a calibration cycle when CAL is brought low again. The CAL pin
can also be used as a strobe to synchronize the operation of several AD7701s.
14
19
AVDD
Analog Positive Supply, +5 V Nominal.
15
20
DVDD
Digital Positive Supply, +5 V Nominal.
16
24
CS
Chip Select Input. When
CS is brought low, the AD7701 will begin to transmit serial
data in a format determined by the state of the MODE pin.
18
26
DRDY
Data Ready Output.
DRDY is low when valid data is available in the output register. It
goes high after transmission of a word is completed. It also goes high for four clock
cycles when a new data-word is being loaded into the output register, to indicate that
valid data is not available, irrespective of whether data transmission is complete or not.
19
27
SCLK
Serial Clock Input/Output. The SCLK pin is configured as an input or output, depen-
dent on the type of serial data transmission that has been selected by the MODE pin.
When configured as an output in the Synchronous Self-Clocking mode, it has a fre-
quency of fCLKIN/4 and a duty cycle of 25%.
20
28
SDATA
Serial Data Output. The AD7701’s output data is available at this pin as a 16-bit serial
word. The transmission format is determined by the state of the MODE pin.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7982BCPZ-RL7 | IC ADC 18BIT 1MSPS PULSR 10LFCSP |
| VI-21L-MX | CONVERTER MOD DC/DC 28V 75W |
| MAX9109EXT+T | IC COMPAR LP SGL SC70-6 |
| VE-J13-MW-F4 | CONVERTER MOD DC/DC 24V 100W |
| HEW.LM.368.XLNP | CONN RCPT 68POS PNL MT SKT W/NUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7701ARZ-REEL | 功能描述:IC ADC 16BIT LC2MOS 20SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7701BN | 功能描述:IC ADC 16BIT LC2MOS MONO 20-DIP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| AD7701BNZ | 功能描述:IC ADC 16BIT LC2MOS MONO 20-DIP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| AD7701BQ | 制造商:AD 制造商全称:Analog Devices 功能描述:LC2MOS 16-Bit A/D Converter |
| AD7701BR | 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 4ksps 16-bit Serial 20-Pin SOIC W 制造商:Rochester Electronics LLC 功能描述:16 BIT SIGMA DELTA CONVER - Bulk |
发布紧急采购，3分钟左右您将得到回复。