- 您现在的位置：买卖IC网 > PDF目录10531 > AD7864ASZ-3 (Analog Devices Inc)IC ADC 12BIT PAR 520K 4CH 44MQFP PDF资料下载
参数资料
| 型号： | AD7864ASZ-3 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/28页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT PAR 520K 4CH 44MQFP |
| 标准包装： | 1 |
| 位数： | 12 |
| 采样率（每秒）： | 520k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 120mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-QFP |
| 供应商设备封装： | 44-MQFP（10x10） |
| 包装： | 托盘 |
| 输入数目和类型： | 4 个差分，双极 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
AD7864
Rev. D | Page 24 of 28
MICROPROCESSOR INTERFACING
The high speed parallel interface of the AD7864 allows easy
interfacing to most DSPs and microprocessors. This interface
consists of the data lines (DB0 to DB11), CS, RD, WR, EOC,
and BUSY.
AD7864 TO ADSP-2100/ADSP-2101/ADSP-2102
INTERFACE
Figure 23 shows an interface between the AD7864 and the
ADSP-210x. The CONVST signal can be generated by the
ADSP-210x or from some other external source.
shows the
CS being generated by a combination of the DMS
signal and the address bus of the ADSP-210x. In this way, the
AD7864 is mapped into the data memory space of the
ADSP-210x.
The AD7864 BUSY line provides an interrupt to the ADSP-210x
when the conversion sequence is complete on all the selected
channels. The conversion results can then be read from the
AD7864 using successive read operations. Alternately, one can
use the EOC pulse to interrupt the ADSP-210x when the
conversion on each channel is complete when reading between
each conversion in the conversion sequence (
). The
AD7864 is read using the following instruction:
MR0 = DM(ADC)
where MR0 is the ADSP-210x MR0 register and ADC is the
AD7864 address.
CS
RD
WR
BUSY
CONVST
DB0 TO DB11
AD7864
VIN1
VIN2
VIN3
VIN4
DT1/F0
IRQn
RD
WR
D0 TO D24
DMS
A0 TO A13
ADSP-210x
ADDRESS
DECODE
01
34
1-
0
23
Figure 23. AD7864 to ADSP-210x Interface
AD7864 TO TMS320C5x INTERFACE
Figure 24 shows an interface between the AD7864 and the
TMS320C5x. As with the previous interfaces, conversion can be
initiated from the TMS320C5x or from an external source, and
the processor is interrupted when the conversion sequence is
completed. The CS signal to the AD7864 is derived from the DS
signal and a decode of the address bus. This maps the AD7864
into external data memory. The RD signal from the TMS320C5x
is used to enable the ADC data onto the data bus. The AD7864
has a fast parallel bus, consequently there are no wait state
requirements. The following instruction is used to read the
conversion results from the AD7864:
IN D,ADC
where D is the data memory address and ADC is the AD7864
address.
CS
RD
WR
BUSY
CONVST
DB0 TO DB11
AD7864
VIN1
VIN2
VIN3
VIN4
PA0
INTn
RD
WE
D0 TO D15
DS
A0 TO A13
TMS320C5x
ADDRESS
DECODE
01
34
1-
0
24
Figure 24. AD7864 to TMS320C5x Interface
AD7864 TO MC68HC000 INTERFACE
An interface between the AD7864 and the MC68HC000 is
shown in Figure 25. The conversion can be initiated from the
MC68HC000 or from an external source. The AD7864 BUSY
line can be used to interrupt the processor or, alternatively,
software delays can ensure that the conversion has been
completed before a read to the AD7864 is attempted. Because of
the nature of its interrupts, the MC68HC000 requires additional
logic (not shown in Figure 25) to allow it to be interrupted
correctly. For further information on MC68HC000 interrupts,
consult the Addendum to MC68000 Users Manual.
The MC68HC000 AS and R/W outputs are used to generate a
separate RD input signal for the AD7864. RD is used to drive
the MC68HC000 DTACK input to allow the processor to
execute a normal read operation to the AD7864. The conversion
results are read using the following MC68HC000 instruction:
MOVE.W ADC,D0
where D0 is the MC68HC000 D0 register and ADC is the
AD7864 address.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J41-MW-F1 | CONVERTER MOD DC/DC 12V 100W |
| MS3102R22-16S | CONN RCPT 9POS BOX MNT W/SCKT |
| LTC2290IUP#PBF | IC ADC DUAL 12BIT 10MSPS 64QFN |
| VI-BTR-MX-F4 | CONVERTER MOD DC/DC 7.5V 75W |
| ISL3171EIBZ | TXRX ESD 3.3V RS-485/422 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7864ASZ-32 | 制造商:AD 制造商全称:Analog Devices 功能描述:4-Channel, Simultaneous Sampling, High Speed, 12-Bit ADC |
| AD7864ASZ-3REEL | 功能描述:IC ADC 12BIT PAR 520K 4CH 44MQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7864ASZ-3REEL2 | 制造商:AD 制造商全称:Analog Devices 功能描述:4-Channel, Simultaneous Sampling, High Speed, 12-Bit ADC |
| AD7864BS-1 | 制造商:Analog Devices 功能描述:ADC Single SAR 520ksps 12-bit Parallel 44-Pin MQFP 制造商:Analog Devices 功能描述:IC 12-BIT ADC |
| AD7864BS-1REEL | 制造商:Analog Devices 功能描述:ADC Single SAR 520ksps 12-bit Parallel 44-Pin MQFP T/R |
发布紧急采购，3分钟左右您将得到回复。