参数资料
| 型号： | AD8001AQ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 5/17页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP CF LP LDIST 70MA 8CDIP |
| 标准包装： | 48 |
| 放大器类型： | 电流反馈 |
| 电路数： | 1 |
| 转换速率： | 1200 V/µs |
| -3db带宽： | 880MHz |
| 电流 - 输入偏压： | 5µA |
| 电压 - 输入偏移： | 2000µV |
| 电流 - 电源： | 5mA |
| 电流 - 输出 / 通道： | 70mA |
| 电压 - 电源，单路/双路(±)： | ±3 V ~ 6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-CDIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-CERDIP |
| 包装： | 管件 |
REV. D
AD8001
–12–
Communications
Distortion is a key specification in communications applications.
Intermodulation distortion (IMD) is a measure of the ability of
an amplifier to pass complex signals without the generation of
spurious harmonics. The third order products are usually the
most problematic since several of them fall near the fundamentals
and do not lend themselves to filtering. Theory predicts that the
third order harmonic distortion components increase in power at
three times the rate of the fundamental tones. The specification
of third order intercept as the virtual point where fundamental and
harmonic power are equal is one standard measure of distortion
performance. Op amps used in closed-loop applications do not
always obey this simple theory. At a gain of +2, the AD8001
has performance summarized in Figure 10. Here the worst third
order products are plotted versus input power. The third order
intercept of the AD8001 is +33 dBm at 10 MHz.
–80
3
–7
–75
2
1
0
–4
–5
6
–2
–70
–65
–60
–55
–50
–45
–1
THIRD
ORDER
IMD
–
dBc
INPUT POWER – dBm
–6
–8
4
5
–3
2F2 – F1
2F1 – F2
G = +2
F1 = 10MHz
F2 = 12MHz
Figure 10. Third Order IMD; F1 = 10 MHz, F2 = 12 MHz
Operation as a Video Line Driver
The AD8001 has been designed to offer outstanding perfor-
mance as a video line driver. The important specifications of
differential gain (0.01%) and differential phase (0.025
°) meet
the most exacting HDTV demands for driving one video load.
The AD8001 also drives up to two back terminated loads as
shown in Figure 11, with equally impressive performance (0.01%,
0.07
°). Another important consideration is isolation between
loads in a multiple load application. The AD8001 has more
than 40 dB of isolation at 5 MHz when driving two 75
back
terminated loads.
909
75
CABLE
75
VOUT NO. 1
VOUT NO. 2
+VS
–VS
VIN
0.1 F
0.001 F
AD8001
0.1 F
75
CABLE
75
CABLE
+
0.001 F
75
Figure 11. Video Line Driver
相关PDF资料 |
PDF描述 |
|---|---|
| 1-1586489-8 | CONN HEADER 18POS VERT PCB TIN |
| ADA4637-1BRZ-R7 | IC OPAMP JFET 79.9MHZ LN 8SOIC |
| 68423-136 | BERGSTIK II SR RIGHT ANGLE |
| MCP603T-E/SN | IC OPAMP SNGL 2.7V 8SOIC |
| MCP603-E/ST | IC OPAMP SNGL 2.7V 8TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8001AR | 功能描述:IC OPAMP CF LP LDIST 70MA 8SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| AD8001AR-REEL | 功能描述:IC OPAMP CF LP LDIST 70MA 8SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源，单路/双路(±):2 V ~ 44 V，±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP（5x3） 包装:管件 |
| AD8001AR-REEL7 | 功能描述:IC OPAMP CF LP LDIST 70MA 8SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:13 V/µs 增益带宽积:3MHz -3db带宽:- 电流 - 输入偏压:65pA 电压 - 输入偏移:3000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| AD8001ART | 制造商:AD 制造商全称:Analog Devices 功能描述:800 MHz 50 mW Current Feedback Amplifier(222.93 k) |
| AD8001ART-EBZ | 功能描述:放大器 IC 开发工具 AD8001ART-EBZ_A00674_EB-O5/6RT-1Z RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
发布紧急采购，3分钟左右您将得到回复。