- 您现在的位置：买卖IC网 > PDF目录2137 > AD823AARZ-R7 (Analog Devices Inc)IC OPAMP FET RR 17MHZ DUAL 8SOIC PDF资料下载
参数资料
| 型号： | AD823AARZ-R7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP FET RR 17MHZ DUAL 8SOIC |
| 标准包装： | 1,000 |
| 放大器类型： | J-FET |
| 电路数： | 2 |
| 输出类型： | 满摆幅 |
| 转换速率： | 35 V/µs |
| -3db带宽： | 19MHz |
| 电流 - 输入偏压： | 1.3pA |
| 电压 - 输入偏移： | 700µV |
| 电流 - 电源： | 6.3mA |
| 电流 - 输出 / 通道： | 44mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 36 V，±1.5 V ~ 18 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 带卷 (TR) |
AD823A
Data Sheet
Rev. | Page 16 of 20
WIDEBAND PHOTODIODE PREAMP
–
+
VOUT
VB
CD
CM
AD823A
RSH = 10
11
CS
IPHOTO
CF
RF
09439-
055
Figure 42. Wideband Photodiode Preamp
The AD823A is an excellent choice for photodiode preamp
application. Its low input bias current minimizes the DC error
at the preamp output. In addition, its high gain bandwidth
product and low input capacitance maximizes the signal
bandwidth of the photodiode preamp. Figure 42 shows the
AD823A as a current-to-voltage (I/V) converter with an
electrical model of a photodiode.
The transimpedance gain of the photodiode preamp can be
described by the basic transfer function:
F
PHOTO
OUT
R
sC
R
I
V
+
×
=
1
(1)
where IPHOTO is the output current of the photodiode, and the
parallel combination of RF and CF sets the signal bandwidth (see
the I to V gain curve in Figure 43). Note that one should set RF
such that the maximum attainable output voltage corresponds
to the maximum diode current IPHOTO. This allows one to utilize
the full output swing.
The signal bandwidth that is attainable with this preamp is a
function of RF, the gain bandwidth product (fu) of the amplifier,
and the total capacitance at the amplifier summing junction,
including CS and the amplifier input capacitance CD and CM. RF
and the total capacitance produce a pole with loop frequency (fp).
S
F
p
C
R
f
π
2
1
=
(2)
With the additional pole from the amplifier’s open loop
response, the two-pole system results in peaking and instability
due to an insufficient phase margin (Figure 43(A), Without
Compensation).
Adding CF creates a zero in the loop transmission that compensates
for the effect of the input pole. This stabilizes the photodiode
preamp design because of the increased phase margin. It also sets
the signal bandwidth (Figure 43(B), With Compensation). The
signal bandwidth and the zero frequency are determined by
F
z
C
R
f
π
2
1
=
(3)
Setting the zero at the frequency fx maximizes the signal
bandwidth with a 45° phase margin. Since fx is the geometric
mean of fp and fu, it can be calculated by
u
p
x
f
×
=
(4)
Combining Equation 2, Equation 3 and Equation 4, the value of
CF that produces fx is defined by
u
F
S
F
f
R
C
×
=
π
2
(5)
The frequency response in this case shows about 2 dB of
peaking and 15% overshoot. Doubling CF and cutting the
bandwidth in half results in a flat frequency response with
about 5% transient overshoot.
B
相关PDF资料 |
PDF描述 |
|---|---|
| AD823AR | IC OPAMP JFET R-R DUAL LN 8SOIC |
| AD824ARZ-14-3V-RL | IC OPAMP JFET R-R 2MHZ LP 14SOIC |
| AD8250ARMZ-RL | IC AMP INST ICMOS LDRIFT 10MSOP |
| AD8251ARMZ-RL | IC AMP INST ICMOS LDRIFT 10MSOP |
| AD8253ARMZ | IC AMP INST ICMOS LDRIFT 10MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD823AARZ-RL | 功能描述:IC OPAMP FET RR 17MHZ DUAL 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:3.5 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:30pA 电压 - 输入偏移:2000µV 电流 - 电源:200µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| AD823AN | 制造商:Analog Devices 功能描述:OP Amp Dual GP R-R O/P 制造商:Rochester Electronics LLC 功能描述:DUAL FET R-TO-R 12MHZ AMP - Bulk 制造商:Analog Devices 功能描述:Operational Amplifier (Op-Amp) IC |
| AD823AN | 制造商:Analog Devices 功能描述:GENERAL USAGE DUAL OP-AMP(2030031)((NS)) |
| AD823ANZ | 功能描述:IC OPAMP JFET R-R DUAL LN 8DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| AD823ANZ | 制造商:Analog Devices 功能描述:Operational Amplifier (Op-Amp) IC 制造商:Analog Devices 功能描述:IC, OP-AMP, 16MHZ, 25V/s, 0.8mV, DIP-8 |
发布紧急采购，3分钟左右您将得到回复。