参数资料
型号: AD8402ARU100-REEL
厂商: ANALOG DEVICES INC
元件分类: 数字电位计
英文描述: DUAL 100K DIGITAL POTENTIOMETER, 3-WIRE SERIAL CONTROL INTERFACE, 256 POSITIONS, PDSO14
封装: 1.10 MM, MO-153AB-1, TSSOP-14
文件页数: 30/32页
文件大小: 603K
代理商: AD8402ARU100-REEL
AD8400/AD8402/AD8403
Rev. E | Page 7 of 32
Parameter
Symbol
Conditions
Min
Typ1
Max
Unit
DYNAMIC CHARACTERISTICS6, 10
Bandwidth 3 dB
BW_50 K
R = 50 kΩ
125
kHz
BW_100 K
R = 100 kΩ
71
kHz
Total Harmonic Distortion
THDW
VA = 1 V rms + 2 V dc, VB = 2 V dc, f = 1 kHz
0.003
%
VW Settling Time
tS_50 K
VA = VDD, VB = 0 V, ±1% error band
9
μs
tS_100 K
VA = VDD, VB = 0 V, ±1% error band
18
μs
Resistor Noise Voltage
eNWB_50 K
RWB = 25 kΩ, f = 1 kHz, RS = 0
20
nV/√Hz
eNWB_100 K
RWB = 50 kΩ, f = 1 kHz, RS = 0
29
nV/√Hz
CT
VA = VDD, VB = 0 V
65
dB
1 Typicals represent average readings at 25°C and VDD = 5 V.
2 Resistor position nonlinearity error R-INL is the deviation from an ideal value measured between the maximum resistance and the minimum resistance wiper
positions. R-DNL measures the relative step change from ideal between successive tap positions. Parts are guaranteed monotonic. See the test circuit in Figure 38.
IW = VDD/R for VDD = 3 V or 5 V for the 50 kΩ and 100 kΩ versions.
3 VAB = VDD, wiper (VW) = no connect.
4 INL and DNL are measured at VW with the RDAC configured as a potentiometer divider similar to a voltage output D/A converter. VA = VDD and VB = 0 V.
DNL specification limits of ±1 LSB maximum are guaranteed monotonic operating conditions. See the test circuit in Figure 37.
5 Resistor Terminal A, Resistor Terminal B, and Resistor Terminal W have no limitations on polarity with respect to each other.
6 Guaranteed by design and not subject to production test. Resistor-terminal capacitance tests are measured with 2.5 V bias on the measured terminal. The remaining
resistor terminals are left open circuit.
7 Measured at the Ax terminals. All Ax terminals are open-circuited in shutdown mode.
8 Worst-case supply current consumed when input logic level at 2.4 V, standard characteristic of CMOS logic. See Figure 28 for a plot of IDD vs. logic voltage.
9 PDISS is calculated from (IDD × VDD). CMOS logic level inputs result in minimum power dissipation.
10 All dynamic characteristics use VDD = 5 V.
11 Measured at a VW pin where an adjacent VW pin is making a full-scale voltage change.
相关PDF资料
PDF描述
AD9874ABSTZ SPECIALTY TELECOM CIRCUIT, PQFP48
AD9874ABSTZRL SPECIALTY TELECOM CIRCUIT, PQFP48
ADC0831CIWM 1-CH 8-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO14
ADE7116ASTZF8-RL SPECIALTY ANALOG CIRCUIT, PQFP64
ADE7753ARSZRL SPECIALTY ANALOG CIRCUIT, PDSO20
相关代理商/技术参数
参数描述
AD8402ARU100Z 制造商:Analog Devices 功能描述:DUAL 8-BIT POTENTIOMETER
AD8402ARU100Z-REEL 制造商:Analog Devices 功能描述:DUAL 8-BIT POTENTIOMETER
AD8402ARU10-REEL 功能描述:IC POT DIG DUAL 10K 8BIT 14TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:2,500 系列:XDCP™ 接片:256 电阻(欧姆):100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C(设备位址) 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP(0.173",4.40mm 宽) 供应商设备封装:14-TSSOP 包装:带卷 (TR)
AD8402ARU10Z 制造商:Analog Devices 功能描述:DIG POT 256 DUAL 10KOHM 14 制造商:Analog Devices 功能描述:DIG POT, 256, DUAL, 10KOHM, 14TSSOP; End To End Resistance:10kohm; Track Taper:Linear; Resistance Tolerance:(Not Available); Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:TSSOP; No. of Pins:14; No. of ;RoHS Compliant: Yes 制造商:Analog Devices 功能描述:DIG POT, 256, DUAL, 10KOHM, 14TSSOP; End To End Resistance:10kohm; Track Taper:Linear; Resistance Tolerance:-; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:TSSOP; No. of Pins:14; No. of Steps:256; ;RoHS Compliant: Yes
AD8402ARU1-REEL 制造商:Analog Devices 功能描述:Digital Potentiometer 256POS 1KOhm Dual 14-Pin TSSOP T/R 制造商:Analog Devices 功能描述:DUAL 8-BIT POTENTIOMETER TAPE & REEL - Tape and Reel