- 您现在的位置：买卖IC网 > PDF目录10688 > AD8611ARZ-REEL7 (Analog Devices Inc)IC COMP SGL 4NS ULTRFAST 8SOIC PDF资料下载
参数资料
| 型号： | AD8611ARZ-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 4/20页 |
| 文件大小： | 0K |
| 描述： | IC COMP SGL 4NS ULTRFAST 8SOIC |
| 标准包装： | 1,000 |
| 类型： | 带锁销 |
| 元件数： | 1 |
| 输出类型： | 补充型，TTL |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 5 V |
| 电压 - 输入偏移（最小值）： | 7mV @ 5V |
| 电流 - 输入偏压（最小值）： | 6µA @ 5V |
| 电流 - 静态（最大值）： | 10mA，4mA |
| CMRR, PSRR（标准）： | 85dB CMRR，73dB PSRR |
| 传输延迟（最大）： | 5.5ns |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 安装类型： | 表面贴装 |
| 包装： | 带卷 (TR) |
AD8611/AD8612
Rev. A | Page 12 of 20
voltage is greater than VHI, and does not switch high again until
the input voltage is less than VLO, as given in Equation 1:
()
REF
HI
V
R
V
+
+
=
2
1
5
.
1
V
(1)
2
1
2
R
V
REF
LO
+
×
=
where V+ is the positive supply voltage.
The capacitor CF is optional and can be added to introduce a
pole into the feedback network. This has the effect of increasing
the amount of hysteresis at high frequencies, which is useful
when comparing relatively slow signals in high frequency noise
environments. At frequencies greater than fP, the hysteresis
window approaches VHI = V+ 1.5 V and VLO = 0 V. For
frequencies less than fP, the threshold voltages remain as in
Equation 1.
CLOCK TIMING RECOVERY
Comparators are often used in digital systems to recover clock
timing signals. High speed square waves transmitted over any
distance, even tens of centimeters, can become distorted due to
stray capacitance and inductance. Poor layout or improper
termination can also cause reflections on the transmission line,
further distorting the signal waveform. A high speed
comparator can be used to recover the distorted waveform
while maintaining a minimum of delay.
65 MHz, 100 mV peak-to-peak distorted clock signal into a 4 V
peak-to-peak square wave. The lower trace is the input to the
AD8611, and the upper trace is the QA or QB output from the
comparator. The AD8611 is powered from a 5 V single supply.
TIME (10ns/DIV)
2V/DIV
VOUT
VIN
20mV/DIV
06
01
0-
02
2
Figure 25. Using the AD8611 to Recover a Noisy Clock Signal
A 5 V, HIGH SPEED WINDOW COMPARATOR
A window comparator circuit is used to detect when a signal is
between two fixed voltages. The AD8612 can be used to create a
high speed window comparator, as shown in Figure 26. In this
example, the reference window voltages are set as:
4
3
4
2
1
2
R
V
R
V
LO
HI
+
=
+
=
The output of the A1 comparator goes high when the input
signal exceeds VHI, and the output of A2 goes high only when
VIN drops below VLO. When the input voltage is between VHI
and VLO, both comparator outputs are low, turning off both Q1
and Q2, thus driving VOUT to a high state. If the input signal
goes outside of the reference voltage window, VOUT goes low.
To ensure a minimum of switching delay, the use of high speed
transistors is recommended for Q1 and Q2. Using the AD8612
with 2N3960 transistors provides a total propagation delay from
VIN to VOUT of less than 10 ns.
Table 8. Window Comparator Output States
VOUT
Input Voltage
≈ 200 mV
VIN < VLO
+5 V
VLO < VIN < VHI
≈ 200 mV
VIN > VHI
VHI
5V
R1
R2
6
7
3
4
10
1
VIN
AD8612
1k
VLO
5V
R3
R4
9
8
11
5
12
14
AD8612
1k
Q1
5V
VOUT
1k
500
Q2
500
NOTES
1. Q1, Q2 = 2N3960.
2. PINS 2 AND 13 ARE NO CONNECTS.
A1
A2
0
60
10
-02
3
Figure 26. A High Speed Window Comparator
相关PDF资料 |
PDF描述 |
|---|---|
| AD7823YRZ | IC ADC 8BIT SRL 2.7/5.5V 8-SOIC |
| LTC1540IMS8#TRPBF | IC COMP NANOPOWER W/REF 8-MSOP |
| ISL4489EIBZ | TRANSCEIVER RS-485/422 14-SOIC |
| LTC1540IMS8#TR | IC COMP 300NA 2% VOLT REF 8-MSOP |
| AD7819YRZ | IC ADC 8BIT SAMPLING PAR 16-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8612 | 制造商:AD 制造商全称:Analog Devices 功能描述:Ultrafast 4 ns Single Supply Comparators |
| AD8612ARM | 制造商:Analog Devices 功能描述:DUAL, HIGH SPEED COMPARAT - Tape and Reel |
| AD8612ARU | 功能描述:IC COMP DUAL 4NS FAST 14-TSSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 比较器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:通用 元件数:1 输出类型:CMOS，推挽式，满摆幅，TTL 电压 - 电源，单路/双路(±):2.5 V ~ 5.5 V，±1.25 V ~ 2.75 V 电压 - 输入偏移（最小值）:5mV @ 5.5V 电流 - 输入偏压（最小值）:1pA @ 5.5V 电流 - 输出（标准）:- 电流 - 静态（最大值）:24µA CMRR, PSRR（标准）:80dB CMRR，80dB PSRR 传输延迟（最大）:450ns 磁滞:±3mV 工作温度:-40°C ~ 85°C 封装/外壳:6-WFBGA，CSPBGA 安装类型:表面贴装 包装:管件 其它名称:Q3554586 |
| AD8612ARU-REEL | 功能描述:IC COMP DUAL 4NS FAST 14-TSSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 比较器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:通用 元件数:1 输出类型:CMOS，推挽式，满摆幅，TTL 电压 - 电源，单路/双路(±):2.5 V ~ 5.5 V，±1.25 V ~ 2.75 V 电压 - 输入偏移（最小值）:5mV @ 5.5V 电流 - 输入偏压（最小值）:1pA @ 5.5V 电流 - 输出（标准）:- 电流 - 静态（最大值）:24µA CMRR, PSRR（标准）:80dB CMRR，80dB PSRR 传输延迟（最大）:450ns 磁滞:±3mV 工作温度:-40°C ~ 85°C 封装/外壳:6-WFBGA，CSPBGA 安装类型:表面贴装 包装:管件 其它名称:Q3554586 |
| AD8612ARUZ | 功能描述:IC COMP DUAL 4NS FAST 14-TSSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 比较器 系列:- 标准包装:1 系列:- 类型:通用 元件数:1 输出类型:CMOS，开路集电极，TTL 电压 - 电源，单路/双路(±):2.7 V ~ 5.5 V 电压 - 输入偏移（最小值）:7mV @ 5V 电流 - 输入偏压（最小值）:0.25µA @ 5V 电流 - 输出（标准）:84mA @ 5V 电流 - 静态（最大值）:120µA CMRR, PSRR（标准）:- 传输延迟（最大）:600ns 磁滞:- 工作温度:-40°C ~ 85°C 封装/外壳:SC-74A，SOT-753 安装类型:表面贴装 包装:剪切带 (CT) 产品目录页面:1268 (CN2011-ZH PDF) 其它名称:*LMV331M5*LMV331M5/NOPBLMV331M5CT |
发布紧急采购，3分钟左右您将得到回复。