参数资料
| 型号： | AD8627AKSZ-R2 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP JFET 5MHZ PREC SC70-5 |
| 设计资源： | 4 mA to 20 mA Process Control Loop Using AD5662 (CN0009) |
| 标准包装： | 1 |
| 放大器类型： | J-FET |
| 电路数： | 1 |
| 输出类型： | 满摆幅 |
| 转换速率： | 5 V/µs |
| 增益带宽积： | 5MHz |
| 电流 - 输入偏压： | 0.25pA |
| 电压 - 输入偏移： | 350µV |
| 电流 - 电源： | 710µA |
| 电流 - 输出 / 通道： | 15mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 26 V，±2.5 V ~ 13 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-TSSOP（5 引线），SC-88A，SOT-353 |
| 供应商设备封装： | SC-70-5 |
| 包装： | 剪切带 (CT) |
| 其它名称： | AD8627AKSZ-R2CT |
AD8625/AD8626/AD8627
Data Sheet
Rev. F | Page 16 of 20
OUTPUT AMPLIFIER FOR DACs
Many system designers use amplifiers as buffers on the output
of amplifiers to increase the DAC’s output driving capability.
The high resolution current output DACs need high precision
amplifiers on their output as current-to-voltage converters
(I/V). Additionally, many DACs operate with a single supply of
5 V. In a single-supply application, selection of a suitable op
amp may be more difficult because the output swing of the
amplifier does not usually include the negative rail, in this case
AGND. This can result in some degradation of the DAC’s
specified performance, unless the application does not use
codes near zero. The selected op amp needs to have very low
offset voltage—for a 14-bit DAC, the DAC LSB is 300 V with a
5 V reference—to eliminate the need for output offset trims.
Input bias current should also be very low because the bias
current multiplied by the DAC output impedance (about 10 k
in some cases) adds to the zero-code error. Rail-to-rail input and
output performance is desired. For fast settling, the slew rate of
the op amp should not impede the settling time of the DAC.
Output impedance of the DAC is constant and code
independent, but in order to minimize gain errors, the input
impedance of the output amplifier should be as high as possible.
The AD862x, with a very high input impedance, IB of 1 pA,
and a fast slew rate, is an ideal amplifier for these types of
applications. A typical configuration with a popular DAC is
shown in Figure 46. In these situations, the amplifier adds
another time constant to the system, increasing the settling time
of the output. The AD862x, with 5 MHz of BW, helps in
achieving a faster effective settling time of the combined DAC
and amplifier.
In applications with full 4-quadrant multiplying capability or a
bipolar output swing, the circuit in Figure 47 can be used. In
this circuit, the first and second amplifiers provide a total gain
of 2, which increases the output voltage span to 20 V. Biasing
the external amplifier with a 10 V offset from the reference
voltage results in a full 4-quadrant multiplying circuit.
03023-045
AD5551/AD5552
AD8627
DGND
*AD5552 ONLY
VDD
VREFF*
VREFS*
OUT
SCLK
DIN
CS
AGND
5V
2.5V
UNIPOLAR
OUTPUT
LDAC*
0.1
F
10
F
0.1
F
SERIAL
INTERFACE
5V
Figure 46. Unipolar Output
03023-046
ONE CHANNEL
AD5544
1/2
AD8626
DIGITAL INTERFACE CONNECTIONS
OMITTED FOR CLARITY
VSS
AGNDF
AGNDX
VDD
VREFX
RFBX
ADR01
VREF
10V
1/2
AD8626
–13V
+13V
–10V < VOUT < +10V
10k
5k
10k
VOUT
Figure 47. 4-Quadrant Multiplying Application Circuit
相关PDF资料 |
PDF描述 |
|---|---|
| 3413.0331.26 | FUSE 20A 32V 1206 SLOW SMD |
| 3413.0331.24 | FUSE 20A 32V 1206 SLOW SMD |
| 0034.1515.PT | FUSE 800MA 250V 5X20 FAST GLASS |
| 726345-3 | TERM RING 4AWG #10 SOLIS |
| 0034.1519.PT | FUSE 2A 250V 5X20 FAST GLASS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8627AKSZ-R2 | 制造商:Analog Devices 功能描述:IC OP-AMP 5MHZ 5V/S SC-70-5 |
| AD8627AKSZ-REEL | 功能描述:IC OPAMP JFET 5MHZ PREC SC70-5 RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1,000 系列:- 放大器类型:电压反馈 电路数:4 输出类型:满摆幅 转换速率:33 V/µs 增益带宽积:20MHz -3db带宽:30MHz 电流 - 输入偏压:2nA 电压 - 输入偏移:3000µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:30mA 电压 - 电源，单路/双路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:带卷 (TR) |
| AD8627AKSZ-REEL7 | 功能描述:IC OPAMP JFET 5MHZ PREC SC70-5 RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 产品培训模块:Differential Circuit Design Techniques for Communication Applications 标准包装:1 系列:- 放大器类型:RF/IF 差分 电路数:1 输出类型:差分 转换速率:9800 V/µs 增益带宽积:- -3db带宽:2.9GHz 电流 - 输入偏压:3µA 电压 - 输入偏移:- 电流 - 电源:40mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-VQFN 裸露焊盘，CSP 供应商设备封装:16-LFCSP-VQ 包装:剪切带 (CT) 产品目录页面:551 (CN2011-ZH PDF) 其它名称:ADL5561ACPZ-R7CT |
| AD8627AKSZ-REEL7 | 制造商:Analog Devices 功能描述:IC, OP-AMP, 5MHZ, 5V/ us, SC-70-5 |
| AD8627AR | 制造商:Analog Devices 功能描述:OP Amp Single GP R-R O/P 制造商:Rochester Electronics LLC 功能描述:PRECISION SINGLE SUPPLY DI-JET AMP - Bulk 制造商:Analog Devices 功能描述:IC AMP JFET SMD 8627 SOIC8 |
发布紧急采购，3分钟左右您将得到回复。