- 您现在的位置：买卖IC网 > PDF目录10667 > AD9218BSTZ-40 (Analog Devices Inc)IC ADC 10BIT DUAL 40MSPS 48-LQFP PDF资料下载
参数资料
| 型号： | AD9218BSTZ-40 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 14/28页 |
| 文件大小： | 0K |
| 描述： | IC ADC 10BIT DUAL 40MSPS 48-LQFP |
| 标准包装： | 1 |
| 位数： | 10 |
| 采样率（每秒）： | 40M |
| 数据接口： | 并联 |
| 转换器数目： | 2 |
| 功率耗散（最大）： | 340mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
| 输入数目和类型： | 2 个差分，单极 |
| 产品目录页面： | 780 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页当前第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
AD9218
Rev. C | Page 21 of 28
EVALUATION BOARD
The AD9218/AD9288 customer evaluation board offers an easy
way to test the AD9218 or the AD9288. The compatible pinout
of the two parts facilitates the use of one PCB for testing either
part. The PCB requires power supplies, a clock source, and a
filtered analog source for most ADC testing required.
POWER CONNECTOR
Power is supplied to the board via a detachable 12-lead power
strip. The minimum 3 V supplies required to run the board are
VD, VDL, and VDD. To allow the use of the optional amplifier
path, ±5 V supplies are required.
ANALOG INPUTS
Each channel has an independent analog path that uses a
wideband transformer to drive the ADC differentially from a
single-ended sine source at the input SMAs. The transformer
paths can be bypassed to allow the use of a dc-coupled path
using two AD8138 op amps with a simple board modification.
The analog input should be band-pass filtered to remove any
harmonics in the input signal and to minimize aliasing.
VOLTAGE REFERENCE
The AD9218 has an internal 1.25 V voltage reference; an
external reference for each channel can be employed instead
by connecting two external voltage references at the power
connector and setting jumpers at E18 and E19. The evaluation
board is shipped configured for internal reference mode.
CLOCKING
Each channel can be clocked by a common clock input at SMA
inputs ENCODE A and ENCODE B. The channels can also be
clocked independently by a simple board modification. The
clock input should be a low jitter sine source for maximum
performance.
DATA OUTPUTS
The data outputs are latched on board by two 10-bit latches
and drive an 8-lead connector, which is compatible with the dual-
channel FIFO board that is available from Analog Devices, Inc.
This board, together with ADC analyzer software, can greatly
simplify ADC testing.
DATA FORMAT/GAIN
The DFS/GAIN pin can be biased for desired operation at the
DFS jumper located at the S1, S2 jumpers.
TIMING
Timing on each channel can be controlled, if needed, on the
PCB. Clock signals at the latches or the data ready signals that
go to the output 80-lead connector can be inverted if required.
Jumpers also allow for biasing of Pin S1 and Pin S2 for power-
down and timing alignment control.
TROUBLESHOOTING
If the board does not seem to be working correctly, try the
following:
Verify power at the IC pins.
Check that all jumpers are in the correct position for the
desired mode of operation.
Verify that V
REF
is at 1.23 V.
Try running encode clock and analog inputs at low speeds
(20 MSPS/1 MHz) and monitor the LCX821 outputs, DAC
outputs, and ADC outputs for toggling.
The AD9218 evaluation board is provided as a design example
for customers of Analog Devices. Analog Devices makes no
warranties, express, statutory, or implied, regarding
merchantability or fitness for a particular purpose.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1408CUH#PBF | IC ADC 14BIT 600KSPS 32-QFN |
| MC10E1651FNR2G | IC COMPARATOR DUAL ECL 20-PLCC |
| AD9204BCPZ-80 | IC ADC 10BIT 80MSPS DL 64LFCSP |
| LTC2226IUH#PBF | IC ADC 12BIT 25MSPS SAMPL 32-QFN |
| MC10E1652FNR2G | IC COMPARATOR DUAL ECL 20PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD9218BSTZ-40 | 制造商:Analog Devices 功能描述:A/D Converter (A-D) IC |
| AD9218BSTZ-401 | 制造商:AD 制造商全称:Analog Devices 功能描述:10-Bit, 40/65/80/105 MSPS 3 V Dual Analog-to-Digital Converter |
| AD9218BSTZ-65 | 功能描述:IC ADC 10BIT DUAL 65MSPS 48-LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| AD9218BSTZ-65 | 制造商:Analog Devices 功能描述:IC 10-BIT ADC |
| AD9218BSTZ-651 | 制造商:AD 制造商全称:Analog Devices 功能描述:10-Bit, 40/65/80/105 MSPS 3 V Dual Analog-to-Digital Converter |
发布紧急采购，3分钟左右您将得到回复。