参数资料
| 型号： | AD9411BSVZ-170 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 3/28页 |
| 文件大小： | 0K |
| 描述： | IC ADC 10BIT 170MSPS 100TQFP |
| 产品变化通告： | Product Discontinuance 27/Oct/2011 |
| 标准包装： | 1 |
| 位数： | 10 |
| 采样率（每秒）： | 170M |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 1.42W |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 100-TQFP 裸露焊盘 |
| 供应商设备封装： | 100-TQFP-EP（14x14） |
| 包装： | 托盘 |
| 输入数目和类型： | 1 个差分，单极 |
第1页第2页当前第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
Data Sheet
AD9411
Rev. B | Page 11 of 28
Noise (for Any Range within the ADC)
Calculated as follows:
10
001
.
0
dBFS
dBc
dBM
NOISE
Signal
SNR
FS
Z
V
where Z is the input impedance, FS is the full scale of the device
for the frequency in question, SNR is the value of the particular
input level, and Signal is the signal level within the ADC reported
in dB below full scale. This value includes both thermal and
quantization noise.
Power Supply Rejection Ratio (PSRR)
The ratio of a change in input offset voltage to a change in
power supply voltage.
Signal-to-Noise-and-Distortion (SINAD)
The ratio of the rms signal amplitude (set 1 dB below full scale)
to the rms value of the sum of all other spectral components,
including harmonics but excluding dc.
Signal-to-Noise Ratio (without Harmonics)
The ratio of the rms signal amplitude (set at 1 dB below full
scale) to the rms value of the sum of all other spectral compo-
nents, excluding the first five harmonics and dc.
Spurious-Free Dynamic Range (SFDR)
The ratio of the rms signal amplitude to the rms value of the
peak spurious spectral component. The peak spurious compo-
nent may or may not be a harmonic. May be reported in dBc
(i.e., degrades as signal level is lowered) or dBFS (always related
back to converter full scale).
Two-Tone Intermodulation Distortion Rejection
The ratio of the rms value of either input tone to the rms value of
the worst third-order intermodulation product, reported in dBc.
Two-Tone SFDR
The ratio of the rms value of either input tone to the rms value
of the peak spurious component. The peak spurious component
may or may not be an IMD product. May be reported in dBc
(i.e., degrades as signal level is lowered) or in dBFS (always
related back to converter full scale).
Worst Other Spur
The ratio of the rms signal amplitude to the rms value of the
worst spurious component (excluding the second and third
harmonics) reported in dBc.
Transient Response Time
The time it takes for the ADC to reacquire the analog input
after a transient from 10% above negative full scale to 10%
below positive full scale.
Out-of-Range Recovery Time
The time it takes for the ADC to reacquire the analog input
after a transient from 10% above positive full scale to 10% above
negative full scale, or from 10% below negative full scale to 10%
below positive full scale.
OBSOLETE
相关PDF资料 |
PDF描述 |
|---|---|
| AD9430BSVZ-170 | IC ADC 12BIT 170MSPS 3.3V100TQFP |
| AD9432BSVZ-80 | IC ADC 12BIT 80MSPS 52TQFP |
| AD9433BSVZ-125 | IC ADC 12BIT 125MSPS 52-TQFP |
| AD9444BSVZ-80 | IC ADC 14BIT 80MSPS 100TQFP |
| AD9445BSVZ-125 | IC ADC 14BIT 125MSPS 100-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD9411BSVZ-200 | 功能描述:IC ADC 10BIT 200MSPS 100TQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率（每秒）:3M 数据接口:- 转换器数目:- 功率耗散（最大）:- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:- |
| ad9411pcb | 制造商:Analog Devices 功能描述: |
| AD9430 | 制造商:AD 制造商全称:Analog Devices 功能描述:12-Bit, 170 MSPS 3.3V A/D Converter |
| AD9430/PCB-CMOS | 制造商:AD 制造商全称:Analog Devices 功能描述:12-Bit, 170 MSPS 3.3V A/D Converter |
| AD9430_10 | 制造商:AD 制造商全称:Analog Devices 功能描述:12-Bit, 170/210 MSPS 3.3 V A/D Converter |
发布紧急采购，3分钟左右您将得到回复。