参数资料
型号: AD9788-DPG2-EBZ
厂商: Analog Devices Inc
文件页数: 13/64页
文件大小: 0K
描述: BOARD EVALUATION FOR AD9788
设计资源: Powering the AD9788 Using ADP2105 for Increased Efficiency (CN0141)
标准包装: 1
系列: *
DAC 的数量: 2
位数: 16
采样率(每秒): 800M
数据接口: 串行
设置时间: 22ms
DAC 型: 电流
工作温度: -40°C ~ 85°C
已供物品: *
已用 IC / 零件: AD9788
AD9785/AD9787/AD9788
Rev. A | Page 20 of 64
TERMINOLOGY
Integral Nonlinearity (INL)
INL is defined as the maximum deviation of the actual analog
output from the ideal output, determined by a straight line
drawn from zero scale to full scale.
Differential Nonlinearity (DNL)
DNL is the measure of the variation in analog value, normalized
to full scale, associated with a 1 LSB change in digital input code.
Monotonicity
A DAC is monotonic if the output either increases or remains
constant as the digital input increases.
Offset Error
The deviation of the output current from the ideal of zero is
called offset error. For IOUTA, 0 mA output is expected when the
inputs are all 0s. For IOUTB, 0 mA output is expected when all
inputs are set to 1.
Gain Error
The difference between the actual and ideal output span is
called gain error. The actual span is determined by the differ-
ence between the output when all inputs are set to 1 and the
output when all inputs are set to 0.
Output Compliance Range
The output compliance range is the range of allowable voltage
at the output of a current output DAC. Operation beyond the
maximum compliance limits can cause either output stage
saturation or breakdown, resulting in nonlinear performance.
Temperature Drift
Temperature drift is specified as the maximum change from the
ambient (25°C) value to the value at either TMIN or TMAX. For
offset and gain drift, the drift is reported in ppm of full-scale
range (FSR) per degree Celsius. For reference drift, the drift is
reported in ppm per degree Celsius.
Power Supply Rejection (PSR)
PSR is the maximum change in the full-scale output as the
supplies are varied from minimum to maximum specified
voltages.
Settling Time
Settling time is the time required for the output to reach and
remain within a specified error band around its final value,
measured from the start of the output transition.
Spurious-Free Dynamic Range (SFDR)
Spurious-free dynamic range is the difference, in decibels,
between the peak amplitude of the output signal and the peak
amplitude of the largest spurious signal in a given frequency
band from the signal. For out-of-band SFDR, the frequency
band is 0 to one half the DAC sample rate. For in-band SFDR,
the frequency band is 0 to one half the input data rate.
Total Harmonic Distortion (THD)
THD is the ratio of the rms sum of the first six harmonic com-
ponents to the rms value of the measured fundamental. It is
expressed as a percentage or in decibels.
Noise Spectral Density (NSD)
NSD is the noise power at the analog output measured in a 1 Hz
bandwidth.
Interpolation Filter
If the digital inputs to the DAC are sampled at a multiple rate of
fDATA (interpolation rate), a digital filter can be constructed that
has a sharp transition band near fDATA/2. Images that typically
appear around fDAC (output data rate) can be greatly suppressed.
Adjacent Channel Leakage Ratio (ACLR)
ACLR is the ratio in dBc between the measured power within a
channel relative to its adjacent channel.
Complex Image Rejection
In a traditional two-part upconversion, two images are created
around the second intermediate frequency (IF). These images
have the effect of wasting transmitter power and system band-
width. By placing the real part of a second complex modulator
in series with the first complex modulator, either the upper or
lower frequency image near the second IF can be rejected.
Sinc
Sinc is shorthand for the mathematical function
sinc(x) = sin(x)/x
This function is a useful tool for digital signal processing. The
normalized sinc function is used here and is defined as follows:
sinc(x) = sin(π × x)/(π × x)
相关PDF资料
PDF描述
SLPX223M025E7P3 CAP ALUM 22000UF 25V 20% SNAP
EMA10DTKS CONN EDGECARD 20POS DIP .125 SLD
EVAL-AD5392EBZ BOARD EVAL FOR AD5392
380LX682M025H022 CAP ALUM 6800UF 25V 20% SNAP
DC941A BOARD DELTA SIGMA ADC LTC2482
相关代理商/技术参数
参数描述
AD9788-EBZ 制造商:Analog Devices 功能描述:Evaluation Board For AD9788 制造商:Analog Devices 功能描述:DUAL 16B, D-A CONVERTER - Bulk 制造商:Analog Devices 功能描述:Digital to Analog Eval. Board
AD9788MOD-EBZ 制造商:Analog Devices 功能描述:DUAL 12-/14-/16-BIT 800 MSPS DAC WITH LOW POWER 32-BIT COMPLEX NCO 制造商:Analog Devices 功能描述:DUAL 16B, D-A CONVERTER - Bulk
AD9789BBC 功能描述:数模转换器- DAC 14 Bit 2.5 GSPS D-A Converter RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube
AD9789BBCRL 制造商:Analog Devices 功能描述:QAM Encoder/Interpolator/Upconverter 164-Pin CSP-BGA T/R 制造商:Analog Devices 功能描述:QAM ENCODER/INTERPOLATOR/UPCNVRTR 164CSPBGA - Tape and Reel 制造商:Analog Devices 功能描述:IC DAC 14BIT 2.4GSPS 4CH 164BGA 制造商:Analog Devices Inc. 功能描述:Digital to Analog Converters - DAC 14 Bit 2.5 GSPS D-A Converter 制造商:Analog Devices Inc. 功能描述:Digital to Analog Converters - DAC 14B 2400MSPS RF w/ 4CH Signal Process 制造商:Analog Devices 功能描述:CONVERTER - DAC
AD9789BBCZ 功能描述:数模转换器- DAC 14 Bit 2.5 GSPS D-A Converter RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube