- 您现在的位置：买卖IC网 > PDF目录10980 > AD9833BRMZ (Analog Devices Inc)IC WAVEFORM GENERTR PROG 10-MSOP PDF资料下载
参数资料
| 型号： | AD9833BRMZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 7/24页 |
| 文件大小： | 0K |
| 描述： | IC WAVEFORM GENERTR PROG 10-MSOP |
| 产品培训模块： | Direct Digital Synthesis Tutorial Series (1 of 7): Introduction Direct Digital Synthesizer Tutorial Series (7 of 7): DDS in Action Direct Digital Synthesis Tutorial Series (3 of 7): Angle to Amplitude Converter Direct Digital Synthesis Tutorial Series (6 of 7): SINC Envelope Correction Direct Digital Synthesis Tutorial Series (4 of 7): Digital-to-Analog Converter Direct Digital Synthesis Tutorial Series (2 of 7): The Accumulator |
| 标准包装： | 50 |
| 分辨率（位）： | 10 b |
| 主 fclk： | 25MHz |
| 调节字宽（位）： | 28 b |
| 电源电压： | 2.3 V ~ 5.5 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 管件 |
| 产品目录页面： | 797 (CN2011-ZH PDF) |
Data Sheet
AD9833
Rev. E | Page 15 of 24
FREQUENCY AND PHASE REGISTERS
The AD9833 contains two frequency registers and two phase
registers, which are described in Table 7.
Table 7. Frequency and Phase Registers
Register
Size
Description
FREQ0
28 bits
Frequency Register 0. When the FSELECT
bit = 0, this register defines the output
frequency as a fraction of the MCLK
frequency.
FREQ1
28 bits
Frequency Register 1. When the FSELECT
bit = 1, this register defines the output
frequency as a fraction of the MCLK
frequency.
PHASE0
12 bits
Phase Offset Register 0. When the PSELECT
bit = 0, the contents of this register are
added to the output of the phase
accumulator.
PHASE1
12 bits
Phase Offset Register 1. When the PSELECT
bit = 1, the contents of this register are
added to the output of the phase
accumulator.
The analog output from the AD9833 is
fMCLK/228 × FREQREG
where FREQREG is the value loaded into the selected frequency
register. This signal is phase shifted by
2π/4096 × PHASEREG
where PHASEREG is the value contained in the selected phase
register. Consideration must be given to the relationship of the
selected output frequency and the reference clock frequency to
avoid unwanted output anomalies.
The flowchart in Figure 28 shows the routine for writing to the
frequency and phase registers of the AD9833.
Writing to a Frequency Register
When writing to a frequency register, Bit D15 and Bit D14 give
the address of the frequency register.
Table 8. Frequency Register Bits
D15
D14
D13
D0
0
1
MSB 14 FREQ0 REG bits
LSB
1
0
MSB 14 FREQ1 REG bits
LSB
If the user wants to change the entire contents of a frequency
register, two consecutive writes to the same address must be
performed because the frequency registers are 28 bits wide. The
first write contains the 14 LSBs, and the second write contains
the 14 MSBs. For this mode of operation, the B28 (D13) control
bit should be set to 1. An example of a 28-bit write is shown in
Table 9. Writing 0xFFFC000 to the FREQ0 Register
SDATA Input
Result of Input Word
0010 0000 0000 0000
Control word write
(D15, D14 = 00), B28 (D13) = 1,
HLB (D12) = X
0100 0000 0000 0000
FREQ0 register write
(D15, D14 = 01), 14 LSBs = 0x0000
0111 1111 1111 1111
FREQ0 register write
(D15, D14 = 01), 14 MSBs = 0x3FFF
In some applications, the user does not need to alter all 28 bits
of the frequency register. With coarse tuning, only the 14 MSBs
are altered, while with fine tuning, only the 14 LSBs are altered.
By setting the B28 (D13) control bit to 0, the 28-bit frequency
register operates as two, 14-bit registers, one containing the 14 MSBs
and the other containing the 14 LSBs. This means that the 14 MSBs
of the frequency word can be altered independent of the 14 LSBs,
and vice versa. Bit HLB (D12) in the control register identifies
which 14 bits are being altered. Examples of this are shown in
Table 10. Writing 0x3FFF to the 14 LSBs of the FREQ1 Register
SDATA Input
Result of Input Word
0000 0000 0000 0000
Control word write (D15, D14 = 00),
B28 (D13) = 0; HLB (D12) = 0, that is, LSBs
1011 1111 1111 1111
FREQ1 REG write (D15, D14 = 10),
14 LSBs = 0x3FFF
Table 11. Writing 0x00FF to the 14 MSBs of the FREQ0 Register
SDATA Input
Result of Input Word
0001 0000 0000 0000
Control word write (D15, D14 = 00),
B28 (D13) = 0, HLB (D12) = 1, that is, MSBs
0100 0000 1111 1111
FREQ0 REG write (D15, D14 = 01),
14 MSBs = 0x00FF
Writing to a Phase Register
When writing to a phase register, Bit D15 and Bit D14 are set to 11.
Bit D13 identifies which phase register is being loaded.
Table 12. Phase Register Bits
D15
D14
D13
D12
D11
D0
1
0
X
MSB 12 PHASE0 bits
LSB
1
X
MSB 12 PHASE1 bits
LSB
相关PDF资料 |
PDF描述 |
|---|---|
| VE-B1J-IX-B1 | CONVERTER MOD DC/DC 36V 75W |
| VI-B1J-IX-B1 | CONVERTER MOD DC/DC 36V 75W |
| AD9838BCPZ-RL7 | IC DDS 16MHZ LP 20LFCSP |
| VI-21L-CU-S | CONVERTER MOD DC/DC 28V 200W |
| VE-B1L-IX-B1 | CONVERTER MOD DC/DC 28V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD9833BRMZ | 制造商:Analog Devices 功能描述:WAVEFORM GENERATOR 9833 MSOP10 |
| AD9833BRMZ-REEL | 功能描述:IC WAVEFORM GEN PROG 10MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 直接数字合成 (DDS) 系列:- 产品变化通告:Product Discontinuance 27/Oct/2011 标准包装:2,500 系列:- 分辨率（位）:10 b 主 fclk:25MHz 调节字宽（位）:32 b 电源电压:2.97 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| AD9833BRMZ-REEL7 | 功能描述:IC WAVEFORM GEN PROG 10MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 直接数字合成 (DDS) 系列:- 产品变化通告:Product Discontinuance 27/Oct/2011 标准包装:2,500 系列:- 分辨率（位）:10 b 主 fclk:25MHz 调节字宽（位）:32 b 电源电压:2.97 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| AD9833SRMZ-EP-RL7 | 制造商:Analog Devices 功能描述:10 bit 10 pin DDS I.C. |
| AD9833WBRMZ-REEL | 制造商:Analog Devices 功能描述:10 BIT, 10 PIN DDS I.C. - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。