- 您现在的位置：买卖IC网 > PDF目录5369 > ADA4310-1ACPZ-R2 (Analog Devices Inc)IC OPAMP CF DUAL LDIST 16LFCSP PDF资料下载
参数资料
| 型号： | ADA4310-1ACPZ-R2 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 3/16页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP CF DUAL LDIST 16LFCSP |
| 标准包装： | 1 |
| 放大器类型： | 电流反馈 |
| 电路数： | 2 |
| 转换速率： | 820 V/µs |
| -3db带宽： | 190MHz |
| 电流 - 输入偏压： | 6µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 7.6mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 12 V，±2.5 V ~ 6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-VQFN 裸露焊盘，CSP |
| 供应商设备封装： | 16-LFCSP-VQ |
| 包装： | 标准包装 |
| 其它名称： | ADA4310-1ACPZ-R2DKR |
ADA4310-1
Rev. 0 | Page 11 of 16
APPLICATION INFORMATION
FEEDBACK RESISTOR SELECTION
The feedback resistor has a direct impact on the closed-loop
bandwidth and stability of the current feedback op amp.
Reducing the resistance below the recommended value can
make the amplifier response peak and even become unstable.
Increasing the size of the feedback resistor beyond the recom-
mended value reduces the closed-loop bandwidth. Table 6
provides a convenient reference for quickly determining the
feedback and gain resistor values, and the corresponding
bandwidth, for common gain configurations. The recommended
value of feedback resistor for the ADA4310-1 is 499 Ω.
Table 6. Recommended Values and Frequency Performance1
Gain
RF (Ω)
RG (Ω)
3 dB SS BW (MHz)
+2
499
230
+5
499
124
190
+5
1k
249
125
+10
499
55.4
160
+20
499
26.1
115
1 Conditions: VS = ±6 V, TA = 25°C, RL = 50 Ω, PD1, PD0 = 0,0.
POWER CONTROL MODES OF OPERATION
The ADA4310-1 features four power modes: full power,
power, power, and shutdown. The power modes are
controlled by two logic pins, PD0 and PD1. The power-down
control pins are compatible with standard 3 V and 5 V CMOS
logic. Table 7 shows the various power modes and associated
logic states. In the power-down mode, the output of the
amplifier goes into a high-impedance state.
Table 7. Power Modes
PD1
PD0
Power Mode
Total Supply
Current (mA)
Output
Impedance
Low
Full Power
15.2
Low
High
Power
11.2
Low
High
Low
Power
7.8
Low
High
Power Down
1.3
High
EXPOSED THERMAL PAD CONNECTIONS
The exposed thermal pad on the 10-lead MSOP package is both
the reference for the PD pins and the only electrical connection
for the negative supply voltage. Therefore, in the 10-lead MSOP
package, the ADA4310-1 can only be used on a single supply.
The exposed thermal pad MUST be connected to ground.
Failure to do so will render the part inoperable.
The 4 mm × 4 mm 16-lead LFCSP package has dedicated pins
for both the positive and negative supplies, and it can be used
in either single supply or dual supply applications. There is no
electrical connection for the exposed thermal pad. Although the
pad could theoretically be connected to any potential, it is still
typically connected to ground.
A requirement for both packages is that the thermal pad be
connected to a solid plane with low thermal resistance, ensuring
adequate heat transfer away from the die and into the board.
POWER LINE APPLICATION
Applications (that is, powerline AV modems) requiring greater
than 10 dBm peak power should consider using an external line
driver, such as the ADA4310-1. Figure 21 shows an example
interface between the TxDAC output and ADA4310-1 biased
for single-supply operation. The TxDAC’s peak-to-peak differ-
ential output voltage swing should be limited to 2 V p-p, with
the ADA4310-1’s gain configured to realize the additional
voltage gain required by the application. A low-pass filter
should be considered to filter the DAC images inherent in the
signal reconstruction process. In addition, dc blocking capacitors
are required to level-shift the TxDAC’s output signal to the
common-mode level of the ADA4310-1 (that is, AVDD/2).
06027-
019
0.1F
RSET
R
E
F
IO
IOUTP+
IOUTP–
0dB TO –7.5dB
OPTIONAL
LCLPF
AVDD/2
T
xD
IS
A
B
L
E
ADA4310-1
1/2
RE
F
A
D
J
TxDAC
Figure 21. TxDAC Output Directly via Center-Tap Transformer
相关PDF资料 |
PDF描述 |
|---|---|
| 0034.5618.22 | FUSE 1.25A 250V TLAG 5X20SMD TR |
| KTR10EZPF1603 | RES 160K OHM 1/8W 1% 0805 SMD |
| AD8039ARZ-REEL7 | IC OPAMP VF DUAL LP LN 8SOIC |
| AD8606ARZ-REEL7 | IC OPAMP GP R-R CMOS 10MHZ 8SOIC |
| 3404.0045.24 | FUSE 500MA 125V FAST-ACT SMD T/R |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADA4310-1ACPZ-R7 | 功能描述:IC OPAMP CF DUAL LDIST 16LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| ADA4310-1ACPZ-RL | 功能描述:IC OPAMP CF DUAL LDIST 16LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| ADA4310-1ARHZ | 功能描述:IC OPAMP CF DUAL LDIST 10MSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| ADA4310-1ARHZ-R7 | 功能描述:IC OPAMP CF DUAL LDIST 10MSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| ADA43101ARHZRL | 制造商:ANALOG 功能描述:REEL |
发布紧急采购，3分钟左右您将得到回复。