参数资料
| 型号： | ADA4411-3ARQZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 5/16页 |
| 文件大小： | 0K |
| 描述： | IC HD/FILTER/BUFFER/MUX 24QSOP |
| 标准包装： | 56 |
| 应用： | 2:1 多路复用器-放大器 |
| 输出类型： | 满摆幅 |
| 电路数： | 3 |
| 电流 - 电源： | 57mA |
| 电流 - 输出 / 通道： | 30mA |
| 电压 - 电源，单路/双路(±)： | 4.5 V ~ 12 V，±2.25 V ~ 6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 24-QSOP |
| 包装： | 管件 |
ADA4411-3
Rev. 0 | Page 13 of 16
PRINTED CIRCUIT BOARD LAYOUT
As with all high speed applications, attention to printed
circuit board layout is of paramount importance. Standard high
speed layout practices should be adhered to when designing
with the ADA4411-3. A solid ground plane is recommended,
and surface-mount, ceramic power supply decoupling
capacitors should be placed as close as possible to the supply
pins. All of the ADA4411-3 GND pins should be connected to
the ground plane with traces that are as short as possible.
Controlled impedance traces of the shortest length possible
should be used to connect to the signal I/O pins and should not
pass over any voids in the ground plane. A 75 Ω impedance
level is typically used in video applications. All signal outputs of
the ADA4411-3 should include series termination resistors
when driving transmission lines.
When the ADA4411-3 receives its inputs from a device
with current outputs, the required load resistor value for
the output current is often different from the characteristic
impedance of the signal traces. In this case, if the intercon-
nections are sufficiently short (<< 0.1 wavelength), the trace
does not have to be terminated in its characteristic impedance.
Traces of 75 Ω can be used in this instance, provided their
lengths are an inch or two at the most. This is easily achieved
because the ADA4411-3 and the device feeding it are usually
adjacent to each other, and connections can be made that are
less than one inch in length.
VIDEO ENCODER RECONSTRUCTION FILTER
The ADA4411-3 is easily applied as a reconstruction filter at
the DAC outputs of a video encoder. Figure 24 illustrates how to
use the ADA4411-3 in this type of application with an ADV7322
video encoder in a single-supply application with ac-coupled
outputs.
相关PDF资料 |
PDF描述 |
|---|---|
| ADA4412-3ARQZ-R7 | IC FILTER VID RGB/HD/SD 20QSOP |
| ADA4417-3ARMZ | IC VIDEO FILTER TRPL HD 10-MSOP |
| ADA4420-6ARQZ-R7 | IC FILTER VIDEO 6CH HD/SD 16QSOP |
| ADA4430-1YKSZ-RL | IC FILTER VIDEO ULTRA LP SC70-6 |
| ADA4431-1YCPZ-R2 | IC SD VIDEO FILTER ULP 16LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADA4411-3ARQZ-R7 | 功能描述:IC HD/FILTER/BUFFER/MUX 24QSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 标准包装:1,000 系列:- 应用:驱动器 输出类型:差分 电路数:3 -3db带宽:350MHz 转换速率:1000 V/µs 电流 - 电源:14.5mA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安装类型:表面贴装 封装/外壳:20-VFQFN 裸露焊盘 供应商设备封装:20-QFN 裸露焊盘（4x4） 包装:带卷 (TR) |
| ADA4411-3ARQZ-RL | 功能描述:IC HD/FILTER/BUFFER/MUX 24QSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 标准包装:1,000 系列:- 应用:驱动器 输出类型:差分 电路数:3 -3db带宽:350MHz 转换速率:1000 V/µs 电流 - 电源:14.5mA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安装类型:表面贴装 封装/外壳:20-VFQFN 裸露焊盘 供应商设备封装:20-QFN 裸露焊盘（4x4） 包装:带卷 (TR) |
| ADA4412-3 | 制造商:AD 制造商全称:Analog Devices 功能描述:Integrated Triple Video Filter with Selectable Cutoff Frequencies for RGB, HD/SD |
| ADA4412-3ARQZ | 功能描述:IC FILTER VID RGB/HD/SD 20-QSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 标准包装:250 系列:- 类型:电平移位器 应用:LCD 电视机/监控器 安装类型:表面贴装 封装/外壳:28-WFQFN 裸露焊盘 供应商设备封装:28-WQFN（4x4）裸露焊盘 包装:带卷 (TR) 其它名称:296-32523-2TPS65198RUYT-ND |
| ADA4412-3ARQZ-R7 | 功能描述:IC FILTER VID RGB/HD/SD 20QSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
发布紧急采购，3分钟左右您将得到回复。