- 您现在的位置：买卖IC网 > PDF目录2139 > ADA4861-3YRZ-RL7 (Analog Devices Inc)IC OPAMP CF TRPL LP 100MA 14SOIC PDF资料下载
参数资料
| 型号： | ADA4861-3YRZ-RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/17页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP CF TRPL LP 100MA 14SOIC |
| 标准包装： | 1,000 |
| 放大器类型： | 电流反馈 |
| 电路数： | 3 |
| 转换速率： | 910 V/µs |
| -3db带宽： | 370MHz |
| 电流 - 输入偏压： | 2.9µA |
| 电压 - 输入偏移： | 100µV |
| 电流 - 电源： | 17.9mA |
| 电流 - 输出 / 通道： | 100mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 12 V，±2.5 V ~ 6 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 14-SOIC |
| 包装： | 带卷 (TR) |
ADA4861-3
Rev. A | Page 15 of 16
SINGLE-SUPPLY OPERATION
POWER SUPPLY BYPASSING
The ADA4861-3 can also be operated from a single power
supply.
Careful attention must be paid to bypassing the power supply
pins of the ADA4861-3. High quality capacitors with low
equivalent series resistance (ESR), such as multilayer ceramic
capacitors (MLCCs), should be used to minimize supply voltage
ripple and power dissipation. A large, usually tantalum, 2.2 μF
to 47 μF capacitor located in proximity to the ADA4861-3 is
required to provide good decoupling for lower frequency
signals. The actual value is determined by the circuit transient
and frequency requirements. In addition, 0.1 μF MLCC
decoupling capacitors should be located as close to each of the
power supply pins as is physically possible, no more than 1/8
inch away. The ground returns should terminate immediately
into the ground plane. Locating the bypass capacitor return
close to the load return minimizes ground loops and improves
performance.
Figure 53 shows the schematic for a single 5 V supply
video driver. The input signal is ac-coupled into the amplifier
via C1. Resistor R2 and Resistor R4 establish the input midsupply
reference for the amplifier. Capacitor C5 prevents constant
current from being drawn through the gain set resistor and
enables the ADA4861-3 at dc to provide unity gain to the input
midsupply voltage, thereby establishing the output voltage dc
operating point. Capacitor C6 is the output coupling capacitor.
For more information on single-supply operation of op amps,
0
57
08
-0
54
C2
1F
R2
50k
R4
50k
R3
1k
C1
22F
R1
50
C6
220F
R5
75
R6
75
C5
22F
ADA4861-3
+5V
VOUT
VIN
–VS
C3
2.2F
C4
0.01F
+5V
LAYOUT
As is the case with all high-speed applications, careful attention
to printed circuit board (PCB) layout details prevents associated
board parasitics from becoming problematic. The ADA4861-3
can operate at up to 730 MHz; therefore, proper RF design
techniques must be employed. The PCB should have a
ground plane covering all unused portions of the component
side of the board to provide a low impedance return path.
Removing the ground plane on all layers from the area near
and under the input and output pins reduces stray capacitance.
Signal lines connecting the feedback and gain resistors should
be kept as short as possible to minimize the inductance and
stray capacitance associated with these traces. Termination
resistors and loads should be located as close as possible to their
respective inputs and outputs. Input and output traces should
be kept as far apart as possible to minimize coupling (crosstalk)
through the board. Adherence to microstrip or stripline design
techniques for long signal traces (greater than 1 inch) is
recommended. For more information on high speed board
layout, go to:
Figure 53. Single-Supply Video Driver Schematic
www.analog.com and
相关PDF资料 |
PDF描述 |
|---|---|
| ADA4891-3ARUZ | IC OPAMP GP R-R CMOS 14TSSOP |
| ADA4896-2ACPZ-RL | IC OPAMP GP R-R 50MHZ LP 8LFCSP |
| ADA4898-1YRDZ-RL | IC OPAMP VF ULN ULDIST 8SOIC |
| ADA4899-1YRDZ-R7 | IC OPAMP VF ULN ULDIST 8SOIC |
| ADA4927-2YCPZ-R2 | IC OPAMP CF DIFF DUAL LN 24LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADA4862-3 | 制造商:AD 制造商全称:Analog Devices 功能描述:High Speed, G = +2, Low Cost, Triple Op Amp |
| ADA4862-3YR-EBZ | 功能描述:BOARD EVAL FOR ADA4862-3YR RoHS:是 类别:编程器，开发系统 >> 评估板 - 运算放大器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
| ADA4862-3YRZ | 功能描述:IC OPAMP CF TRPL LP 115MA 14SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:MicroAmplifier™ 放大器类型:通用 电路数:4 输出类型:- 转换速率:3.5 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:5pA 电压 - 输入偏移:1500µV 电流 - 电源:220µA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):4.5 V ~ 36 V，±2.25 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:剪切带 (CT) 其它名称:296-29363-1 |
| ADA4862-3YRZ-RL | 功能描述:IC OPAMP CF TRPL LP 115MA 14SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| ADA4862-3YRZ-RL7 | 功能描述:IC OPAMP CF TRPL LP 115MA 14SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。