- 您现在的位置：买卖IC网 > PDF目录16928 > ADA4938-1YCP-EBZ (Analog Devices Inc)BOARD EVAL FOR ADA4938-1YCP PDF资料下载
参数资料
| 型号： | ADA4938-1YCP-EBZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 4/8页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR ADA4938-1YCP |
| 标准包装： | 1 |
| 每 IC 通道数： | 1 - 单 |
| 放大器类型： | 差分 |
| 板类型： | 裸（未填充） |
| 已供物品： | 板 |
| 已用 IC / 零件： | 16-LFCSP 封装 |
UG-132
EVALUATION BOARD HARDWARE
POWER SUPPLIES
Power is applied to the board through test pins +V S and ?V S
(see Figure 3). The board accommodates single or dual supplies.
For single-supply operation, connect the negative supply to the
ground plane.
It is very important that the power supply pins of the device
under test (DUT) have broadband decoupling circuitry. The
board layout facilitates this with footprints for a 0508 ceramic
capacitor C1 and C2) on each supply. Bulk decoupling is
provided by C3 and C4; 10 μF tantalum capacitors are
recommended.
FEEDBACK NETWORKS AND INPUT/OUTPUT
TERMINATIONS
R1/RG and R2/RF comprise the upper resistive feedback loop
(see Figure 3), and R3/RG and R4/RF compose the lower
feedback loop. To minimize summing node capacitances, the
ground plane under and around Pin 1 and Pin 8 of the DUT
(see Figure 3) and the copper that connects to them have been
removed.
R5 and R6 are included as input termination resistors for applica-
tions that have single-ended inputs.
Evaluation Board User Guide
V OCM INPUT
An external voltage can be applied to V OCM via J6 (referenced to
the ground plane of the board). In ADC driving applications, it
is convenient to apply the ADC dc reference voltage output
directly to J6. The R11 component position can be used for
both resistors and capacitors. A 0.1 μF capacitor is used in
normal applications to provide bypassing for the dc voltage
applied to the V OCM pin.
It is also possible to drive the V OCM input from an external ac
source. In this case, omit R11 or reduce it to a value that allows
the desired signal to be passed.
COMMON-MODE VOLTAGE
The internal common-mode feedback loop used in the differen-
tial drivers forces the output common-mode voltage to be equal
to the voltage applied to the V OCM input, thereby providing
excellent output balance.
SMA INPUT/OUTPUT CONNECTORS
The inputs and outputs have edge-mounted SMA connectors
for convenient connection to coaxial cables. The recommended
connector type is Johnson Components?, Part Number 142-
0701-801 or equivalent.
Rev. 0 | Page 4 of 8
相关PDF资料 |
PDF描述 |
|---|---|
| ADA4939-1YCP-EBZ | BOARD EVAL FOR ADA4939-1YCP |
| 4-1589788-9 | WDUALOBE CONNECTOR |
| VE-J4T-EY | CONVERTER MOD DC/DC 6.5V 50W |
| VE-J4R-EY | CONVERTER MOD DC/DC 7.5V 50W |
| VI-24R-EY | CONVERTER MOD DC/DC 7.5V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADA4938-1YCPZ-R2 | 制造商:AD 制造商全称:Analog Devices 功能描述:Ultra-Low Distortion Differential ADC Driver |
| ADA4938-1YCPZ-R7 | 制造商:AD 制造商全称:Analog Devices 功能描述:Ultra-Low Distortion Differential ADC Driver |
| ADA4938-1YCPZ-RL | 制造商:AD 制造商全称:Analog Devices 功能描述:Ultra-Low Distortion Differential ADC Driver |
| ADA4938-2ACP-EBZ | 功能描述:24-LFCSP Package 2 - Dual Channels per IC Differential Amplifier Evaluation Board 制造商:analog devices inc. 系列:- 零件状态:过期 每 IC 通道数:2 - 双 放大器类型:差分 输出类型:差分 压摆率:- -3db 带宽:- 电流 - 输出/通道:- 工作温度:- 电流 - 电源（主 IC）:- 电压 - 电源，单/双（±）:- 板类型:裸（未填充） 所含物品:板 使用的 IC/零件:24-LFCSP 封装 标准包装:1 |
| ADA4938-2ACPZ-R2 | 制造商:Analog Devices 功能描述:SP Amp DIFF AMP Dual ±5.5V/11V 24-Pin LFCSP EP T/R 制造商:Analog Devices 功能描述:SP AMP DIFF AMP DUAL 5.5V/11V 24LFCSP EP - Tape and Reel 制造商:Analog Devices 功能描述:ANAADA4938-2ACPZ-R2 DUAL ULTRA-LOW DISTO 制造商:Analog Devices 功能描述:IC DIFF AMP 1GHZ 4700V/S LFCSP-24 |
发布紧急采购，3分钟左右您将得到回复。