- 您现在的位置：买卖IC网 > PDF目录378277 > ADC08062 (National Semiconductor Corporation) 500 ns A/D Converter with S/H Function and Input Multiplexer PDF资料下载
参数资料
| 型号： | ADC08062 |
| 厂商： | National Semiconductor Corporation |
| 英文描述： | 500 ns A/D Converter with S/H Function and Input Multiplexer |
| 中文描述： | 500纳秒的A / D转换器与S /高功能和输入复用器 |
| 文件页数： | 11/16页 |
| 文件大小： | 307K |
| 代理商： | ADC08062 |
Application Information
(Continued)
have a voltage drop of 1/256 of the total reference voltage
(V
V
) across them. The remaining resistors make
up the
MSB Ladder
. They are made up of eight groups of
four resistors connected in series. Each MSB Ladder section
has
1
8
of the total reference voltage across it. Within a given
MSB Ladder section, each of the MSB resistors has 8/256,
or 1/32 of the total reference voltage across it. Tap points are
found between all of the resistors in both the MSB and LSB
Ladders. Through the Comparator Multiplexer these tap
points can be connected, in groups of eight, to the eight com-
parators shown at the right of Figure 6 This function pro-
vides the necessary reference voltages to the comparators
during each flash conversion.
The six comparators, seven-resistor string (estimator DAC),
and Estimator Decoder at the left of Figure 6 form the Volt-
age Estimator. The estimator DAC connected between
V
and V
generates the reference voltages for the
six Voltage Estimator comparators. These comparators per-
form a very low resolution A/D conversion to obtain an “esti-
mate” of the input voltage. This estimate is then used to con-
trol the Comparator Multiplexer, connecting the appropriate
MSB Ladder section to the eight flash comparators. Only 14
comparators, six in the Voltage Estimator and eight in the
flash converter, are needed to achieve the full eight-bit reso-
lution, instead of 32 comparators that would be needed by
traditional half-flash methods.
A conversion begins with the Voltage Estimator comparing
the analog input signal against the six tap voltages on the es-
timator DAC. The estimator decoder then selects one of the
groups of tap points along the MSB Ladder. These eight tap
points are then connected to the eight flash comparators.
For example, if the analog input signal applied to V
is be-
tween 0 and 3/16 of V
(V
= V
V
), the esti-
mator decoder instructs the comparator multiplexer to select
the eight tap points between 8/256 and 2/8 of V
and con-
nects them to the eight flash comparators. The first flash
conversion is now performed, producing the five MSBs of
data.
The remaining three LSBs are generated next using the
same eight comparators that were used for the first flash
conversion. As determined by the results of the MSB flash, a
voltage from the MSB Ladder equivalent to the magnitude of
DS011086-18
FIGURE 6. Block Diagram of the ADC08061/2 Multi-Step Flash Architecture
www.national.com
11
相关PDF资料 |
PDF描述 |
|---|---|
| ADC08061 | 500 ns A/D Converter with S/H Function and Input Multiplexer |
| ADC08061BIN | TIMER DIGITAL LED RoHS Compliant: Yes |
| ADC08062BIN | 500 ns A/D Converter with S/H Function and Input Multiplexer |
| ADC08061CIWM | 500 ns A/D Converter with S/H Function and Input Multiplexer |
| ADC08062CIWM | 500 ns A/D Converter with S/H Function and Input Multiplexer |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADC08062 WAF | 制造商:Texas Instruments 功能描述: |
| ADC08062BIJ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Ended Data Acquisition System |
| ADC08062BIN | 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Texas Instruments 功能描述: |
| ADC08062CIJ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Ended Data Acquisition System |
| ADC08062CIWM | 制造商:NSC 制造商全称:National Semiconductor 功能描述:500 ns A/D Converter with S/H Function and Input Multiplexer |
发布紧急采购，3分钟左右您将得到回复。