- 您现在的位置：买卖IC网 > PDF目录10791 > ADCMP565BPZ (Analog Devices Inc)IC COMP DUAL ULTRA-FAST 20-PLCC PDF资料下载
参数资料
| 型号： | ADCMP565BPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 2/16页 |
| 文件大小： | 0K |
| 描述： | IC COMP DUAL ULTRA-FAST 20-PLCC |
| 标准包装： | 49 |
| 类型： | 带锁销 |
| 元件数： | 2 |
| 输出类型： | 补充型，差分，ECL，开路发射极 |
| 电压 - 电源，单路/双路(±)： | ±4.75 V ~ 5.25 V |
| 电压 - 输入偏移（最小值）： | 6mV @ 5V |
| 电流 - 输入偏压（最小值）： | 40µA @ 5V |
| 电流 - 输出（标准）： | 30mA |
| 电流 - 静态（最大值）： | 18mA，80mA |
| CMRR, PSRR（标准）： | 69dB CMRR |
| 传输延迟（最大）： | 0.375ns |
| 磁滞： | ±1mV |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 20-LCC（J 形引线） |
| 安装类型： | 表面贴装 |
| 包装： | 管件 |
| 产品目录页面： | 764 (CN2011-ZH PDF) |
| 配用： | EVAL-ADCMP565BPZ-ND - BOARD EVALUATION ADCMP565BPZ |
ADCMP565
Rev. 0 | Page 10 of 16
as the variation in propagation delay as the input overdrive
conditions are changed (Figure 4). For the ADCMP565,
overdrive dispersion is typically 50 ps as the overdrive is
changed from 100 mV to 1 V. This specification applies for
both positive and negative overdrive since the ADCMP565 has
equal delays for positive and negative going inputs.
The 50 ps propagation delay dispersion of the ADCMP565
offers considerable improvement of the 100 ps dispersion of
other similar series comparators.
Q OUTPUT
INPUT VOLTAGE
1.5V OVERDRIVE
20mV OVERDRIVE
DISPERSION
VREF ± VOS
02820-0-004
Figure 4. Propagation Delay Dispersion
COMPARATOR HYSTERESIS
The addition of hysteresis to a comparator is often useful in a
noisy environment or where it is not desirable for the com-
parator to toggle between states when the input signal is at the
switching threshold. The transfer function for a comparator
with hysteresis is shown in Figure 5. If the input voltage
approaches the threshold from the negative direction, the
comparator will switch from a 0 to a 1 when the input crosses
+VH/2. The new switching threshold becomes VH/2. The
comparator will remain in a 1 state until the threshold VH/2 is
crossed coming from the positive direction. In this manner,
noise centered on 0 V input will not cause the comparator to
switch states unless it exceeds the region bounded by ±VH/2.
Positive feedback from the output to the input is often used to
produce hysteresis in a comparator (Figure 9). The major
problem with this approach is that the amount of hysteresis
varies with the output logic levels, resulting in a hysteresis that
is not symmetrical around zero.
Another method to implement hysteresis is generated by
introducing a differential voltage between the LATCH ENABLE
and LATCH ENABLE inputs (Figure 10). Hysteresis generated
in this manner is independent of output swing and is symmetri-
cal around zero. The variation of hysteresis with input voltage is
shown in Figure 6.
OUTPUT
INPUT
0
1
0V
–VH
2
+VH
2
02820-0-005
Figure 5. Comparator Hysteresis Transfer Function
0
20
60
LATCH = LE – LEB (mV)
H
YSTER
ESIS
(
m
V)
–20
20
02820-0-006
–15
–10
–5
0
5
10
15
40
50
30
10
Figure 6. Comparator Hysteresis Transfer Function
Using Latch Enable Input
MINIMUM INPUT SLEW RATE REQUIREMENT
As for all high speed comparators, a minimum slew rate must
be met to ensure that the device does not oscillate when the
input crosses the threshold. This oscillation is due in part to the
high input bandwidth of the comparator and the parasitics of
the package. Analog Devices recommends a slew rate of 5 V/s
or faster to ensure a clean output transition. If slew rates less
than 5 V/s are used, then hysteresis should be added to reduce
the oscillation.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1321CSW#PBF | IC TXRX RS232/485/EIA562 24-SOIC |
| LT1721CGN#PBF | IC COMP R-RINOUT QUAD 16-SSOP |
| LTC1348CG#PBF | IC TXRX 3.3V/5V RS232 28-SSOP |
| LT1715HMS#PBF | IC COMP DUAL 150MHZ 4NS 10-MSOP |
| ADM2487EBRWZ-REEL7 | IC TXRX RS485 ISO W/ESD 16SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADCMP566 | 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Ultrafast Voltage Comparator |
| ADCMP566BCP | 制造商:Analog Devices 功能描述:Comparator Dual -5.45V/5.25V 32-Pin LFCSP EP 制造商:Rochester Electronics LLC 功能描述:HIGH SPEED COMPARATOR - Bulk 制造商:Analog Devices 功能描述:IC SEMICONDUCTOR ((NS)) |
| ADCMP566BCPZ | 功能描述:IC COMP DUAL ULTRA-FAST 32LFCSP RoHS:是 类别:集成电路 (IC) >> 线性 - 比较器 系列:- 标准包装:1 系列:- 类型:通用 元件数:1 输出类型:CMOS，开路集电极，TTL 电压 - 电源，单路/双路(±):2.7 V ~ 5.5 V 电压 - 输入偏移（最小值）:7mV @ 5V 电流 - 输入偏压（最小值）:0.25µA @ 5V 电流 - 输出（标准）:84mA @ 5V 电流 - 静态（最大值）:120µA CMRR, PSRR（标准）:- 传输延迟（最大）:600ns 磁滞:- 工作温度:-40°C ~ 85°C 封装/外壳:SC-74A，SOT-753 安装类型:表面贴装 包装:剪切带 (CT) 产品目录页面:1268 (CN2011-ZH PDF) 其它名称:*LMV331M5*LMV331M5/NOPBLMV331M5CT |
| ADCMP567 | 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Ultrafast Voltage Comparator |
| ADCMP567BCP | 制造商:Analog Devices 功能描述:Comparator Dual -5.45V/5.25V 32-Pin LFCSP EP 制造商:Analog Devices 功能描述:IC COMPARATOR HIGH SPEED |
发布紧急采购，3分钟左右您将得到回复。