参数资料
| 型号： | ADG751BRMZ-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | IC VIDEO SWITCH SPST 8MSOP |
| 产品培训模块： | Switch Fundamentals |
| 产品变化通告： | Product Discontinuance 27/Oct/2011 |
| 标准包装： | 1,000 |
| 功能： | 视频开关 |
| 电路： | 1 x SPST- NC |
| 导通状态电阻： | 35 欧姆 |
| 电压电源： | 单电源 |
| 电压 - 电源，单路/双路(±)： | 1.8 V ~ 5.5 V |
| 电流 - 电源： | 1nA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 带卷 (TR) |
REV.
ADG751
–8–
GENERAL DESCRIPTION
The ADG751 is an SPST switch constructed using switches in a
T configuration to obtain high “OFF” isolation while maintain-
ing good frequency response in the “ON” condition.
Figure 12 shows the T-switch configuration. While the switch is
in the OFF state, the shunt switch is closed and the two series
switches are open. The closed shunt switch provides a signal
path to ground for any of the unwanted signals that find their
way through the off capacitances of the series’ MOS devices.
This results in improved isolation between the input and output
than with an ordinary series switch. When the switch is in the
ON condition, the shunt switch is open and the signal path is
through the two series switches which are now closed.
D
IN
S
SERIES
SHUNT
Figure 12. Basic T-Switch Configuration
LAYOUT CONSIDERATIONS
Where accurate high frequency operation is important, careful
consideration should be given to the printed circuit board layout
and to grounding. Wire wrap boards, prototype boards and
sockets are not recommended because of their high parasitic
inductance and capacitance. The part should be soldered di-
rectly to a printed circuit board. A ground plane should cover all
unused areas of the component side of the board to provide a
low impedance path to ground. Removing the ground planes
from the area around the part reduces stray capacitance.
Good decoupling is important in achieving optimum perfor-
mance. VDD should be decoupled with a 0.1
F surface mount
capacitor to ground mounted as close as possible to the device
itself.
A
相关PDF资料 |
PDF描述 |
|---|---|
| ADG752BRMZ-REEL7 | IC VIDEO SWITCH SPDT 8MSOP |
| ADG759BCPZ-REEL7 | IC MULTIPLEXER DUAL 4X1 20LFCSP |
| ADG772BCPZ-REEL | IC MUX/DEMUX 2X1 10LFCSP |
| ADG774ABRQ | IC MUX/DEMUX QUAD 2X1 16QSOP |
| ADG774BRQ-REEL | IC MUX/DEMUX QUAD 2X1 16QSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADG751BRT | 制造商:AD 制造商全称:Analog Devices 功能描述:CMOS, Low Voltage RF/Video, SPST Switch |
| ADG751BRT-REEL | 功能描述:IC VIDEO SWITCH SPST SOT23-6 RoHS:否 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源，单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ADG751BRT-REEL7 | 功能描述:IC VIDEO SWITCH SPST SOT23-6 RoHS:否 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源，单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ADG751BRTZ-REEL7 | 功能描述:IC VIDEO SWITCH SPST SOT23-6 RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源，单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ADG752 | 制造商:AD 制造商全称:Analog Devices 功能描述:CMOS, Low Voltage RF/Video, SPDT Switch |
发布紧急采购，3分钟左右您将得到回复。