- 您现在的位置：买卖IC网 > PDF目录11248 > ADG819BRM-REEL (Analog Devices Inc)IC SWITCH SPDT 8MSOP PDF资料下载
参数资料
| 型号： | ADG819BRM-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/12页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH SPDT 8MSOP |
| 产品培训模块： | Switch Fundamentals |
| 标准包装： | 3,000 |
| 功能： | 开关 |
| 电路： | 1 x SPDT - NC/NO |
| 导通状态电阻： | 600 毫欧 |
| 电压电源： | 单电源 |
| 电压 - 电源，单路/双路(±)： | 1.8 V ~ 5.5 V |
| 电流 - 电源： | 1nA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 带卷 (TR) |
ADG819/ADG820
TERMINOLOGY
VDD
Most Positive Power Supply Potential
GND
Ground (0 V) Reference
IDD
Positive Supply Current
S
Source Terminal. May be an input or output.
D
Drain Terminal. May be an input or output.
IN
Logic Control Input
RON
Ohmic Resistance between D and S
RON
ON Resistance Match between Any Two Channels, i.e., RON max – RON min
RFLAT(ON)
Flatness is defined as the difference between the maximum and minimum value of ON resistance as
measured over the specified analog signal range.
IS (OFF)
Source Leakage Current with the Switch OFF
ID, IS (ON)
Channel Leakage Current with the Switch ON
VD (VS)
Analog Voltage on Terminals D, S
VINL
Maximum Input Voltage for Logic “0”
VINH
Minimum Input Voltage for Logic “1”
IINL(IINH)
Input Current of the Digital Input
CS (OFF)
OFF Switch Source Capacitance
CD, CS (ON)
ON Switch Capacitance
tON
Delay between applying the digital control input and the output switching ON.
tOFF
Delay between applying the digital control input and the output switching OFF.
tBBM
OFF time or ON time measured between the 90% points of both switches when switching
from one address state to another.
tMBB
ON time measured between the 80% points of both switches when switching from one
address state to another.
Charge Injection
A measure of the glitch impulse transferred from the digital input to the analog output during switching.
Crosstalk
A measure of unwanted signal coupled through from one channel to another as a result of parasitic
capacitance.
OFF Isolation
A measure of unwanted signal coupling through an OFF switch.
Bandwidth
Frequency at which the output is attenuated by –3 dB.
ON Response
Frequency Response of the ON Switch
Insertion Loss
Loss due to the ON Resistance of the Switch
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate
on the human body and test equipment and can discharge without detection. Although the ADG819/
ADG820 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. 0
–5–
相关PDF资料 |
PDF描述 |
|---|---|
| VE-23Z-IY-S | CONVERTER MOD DC/DC 2V 20W |
| VE-23Y-IX-S | CONVERTER MOD DC/DC 3.3V 49.5W |
| VE-23Y-IW-S | CONVERTER MOD DC/DC 3.3V 66W |
| VI-21F-IY-S | CONVERTER MOD DC/DC 72V 50W |
| VI-21B-IY-S | CONVERTER MOD DC/DC 95V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADG819BRM-REEL7 | 制造商:Analog Devices 功能描述:Analog Switch Single SPDT 8-Pin MSOP T/R 制造商:Analog Devices 功能描述:ANLG SW SGL SPDT 5.5V 8MSOP - Tape and Reel |
| ADG819BRMZ | 功能描述:IC SWITCH SPDT 8MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 应用说明:Ultrasound Imaging Systems Application Note 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:250 系列:- 功能:开关 电路:单刀单掷 导通状态电阻:48 欧姆 电压电源:单电源 电压 - 电源，单路/双路(±):2.7 V ~ 5.5 V 电流 - 电源:5µA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:48-LQFP 供应商设备封装:48-LQFP（7x7） 包装:托盘 |
| ADG819BRMZ | 制造商:Analog Devices 功能描述:Analog Switch / Multiplexer (Mux) IC |
| ADG819BRMZ-REEL7 | 功能描述:IC SWITCH SPDT 8MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源，单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ADG819BRT | 制造商:AD 制造商全称:Analog Devices 功能描述:0.5 OHM CMOS 1.8 V to 5.5 V 2:1 Mux/SPDT Switches |
发布紧急采购，3分钟左右您将得到回复。